A new interface between single-chip microcomputer and general keyboard of AT computer

潘海鸿,郑永康,何克忠

DOI: https://doi.org/10.3969/j.issn.1001-7445.2001.03.010

2001-01-01

Abstract:A new interface between C505CA and general keyboard of AT computer is introduced.The interface circuit can receive not only the on scan codes from AT computer′s keyboard but also the off scan codes, and it doesn′t occupy the microcomputer′s serial port.

What problem does this paper attempt to address?

Based on the single chip microcomputer proteus the A/D transformation design and simulation

CHEN Jun,LIAN Yu-ping,GOU Shuang-quan

DOI: https://doi.org/10.3969/j.issn.1001-9227.2012.02.058

2012-01-01

Abstract:For Protues of abundant simulation models of component and the powerful function of simulation,a new way is presented to A/D conversion of MCU.The diagram schematics are figured out by making use of ADC0808 chip,AT89C52 and 7SEG displayer,and tests are given on the simulation by integrating Keil software,simulation effect of circuit can be observed in a direct and clear way.That reaches the aim of design.
Design and Implementation of Keyboard Interface Based on Single-chip Microcomputer

CAO Cai-ping,LI Gang

DOI: https://doi.org/10.3969/j.issn.1009-3044.2006.11.059

2006-01-01

Abstract:this paper introduces the design and implementation of keyboard interface based on single-chip microcomputer. Results in real application show that the circuits for keyboard interface are simple, the processing program runs reliably and stably, and it is worth popularizing.
Design of Data Communication Interface of Data Acquirement System Based on USB

陈章位,赵玉刚

DOI: https://doi.org/10.3321/j.issn:1004-132X.2004.20.014

2004-01-01

Abstract:An interface based on USB is designed for Data Acquirement System with DSP chips. Cypress EZ-USB technology and FPGA technology were used in this interface. This kind of interface can achieve high speed data communication between the Data Acquirement System and the PC in the USB 1.1 protocol, and it can meet the requirements of high speed and real-time requirements.
A Method of Interactive Interface for Embedded ControIIer

吴波,许力

DOI: https://doi.org/10.3969/j.issn.1001-182X.2014.06.013

2014-01-01

Abstract:This paper proposes a generaI framework design for LCD muIti-IeveI menu,aiming at the design for interactive interface of controI er based on ARM.Then this paper puts forward a method for efficient keystrokes and interactive input,which can avoid traditionaI keys' jitter as weI as improve the utiIizationof I/O portby appIying touch keys,and take advantage of the structure variabIe in the C Ianguage to set the parameters.Themethod has got practicaI appIicationin the design of the ten-sion controI er system.
Implementation of Serial Communication between PLC and Single-chip Microcomputer

Cheng Liang,Lin Bin,Cha Lingzhi

DOI: https://doi.org/10.3969/j.issn.1000-3886.2006.03.013

2006-01-01

Abstract:This paper introduces serial communication between PLC and single-chip microcomputer with the example of S7-226 PLC and AT89S51 MCU.Detailed explanation of hardware configuration and program design in this communication system is given.The design project in paper has been applied successfully in automatic pill-filled machine.
Serial Port Control of SPI Devices Based on Single Chip Microcomputer

祝红彬,李伟,刘子骥,蒋亚东

DOI: https://doi.org/10.3969/j.issn.1004-373x.2009.24.007

2009-01-01

Abstract:The integrated circuit design has been more and more systematic and the engineers have paid more attention on module design.SPI is a synchronous serial peripheral interface bus,which is presented by Motorola Company,allowed the CPU communicate and exchange information with peripheral interface devices by this serial approach.The characteristic of SPI is firstly described.The signals and the representative application of SPI interface are also presented.Application in the DA chip of SPI serial bus interface are described.Parts of the program realizing interface communication programming by C language are presented.The program has been verified by writing to AT89C2051.
High Fidelity Control and Display Unit Simulation Method

LIAO Feng,ZHENG Shu-peng,HOU Wei-qin,JIANG Hong-zhou

DOI: https://doi.org/10.3969/j.issn.1000-3428.2011.04.089

2011-01-01

Abstract:In order to improve the visual feelings and simulation fidelity of Control and Display Unit(CDU) in flight simulator research,based on embedded PC104 CPU and 8255 programmable interface card,this paper designs membrane keyboard hardware circuit and keyboard code scan program and realizes the high fidelity simulation for CDU keyboard.Meanwhile,the CDU simulation page is constructed by utilizing object-oriented simulation technique.It successfully tackles pages system's tiresome generation and management problem.Simulation experimental results show that the method realistically implements routing data and performance parameters input and display in flight simulation.
In System Programming Design of 51 Microcontroller Base on USB Interface

Chen Zhi-ying

Abstract:The paper presents a design of 51 microcontroller AT89S51/52/53 in system programming base on USB interface,emphasis on the hardware design of USB-SPI interface circuit and the design of PC software for microcontroller programming by VB.The design has many advantages such as small size,low power consumption,high reliability etc.It is very valuable in the applications of 51 microcontroller and is worth references as well.

Computer Science,Engineering
Serial Communication Controlling LCM Displaying Based on AT89S52

HE Xiu-ling,GAO Huan-zhi,LI Fang,ZHANG Heng

2008-01-01

Abstract:The system realizes serial communication between AT89S52 MCU and PC, and can drive the LCM device to display specifi-cally characters by operating PC end software, which designs to realize the function of the MCU driving drive the LCM device to dis-play characters under PC end. The whole system consist of three parts: PC end software, MCU system, LCM drives .The PC end software uses JAVA2 platform.
Design of Manual-Machine Interface of Intelligent-Controlled Switch

Yue Wu

2004-01-01

Abstract:A kind of human-machine interface of intelligent-controlled switch used to control low-voltage electric equipments in coal mines is introduced. It's hardware and software design is given. IR remote-controller is used in keyboard and LCD to realize human-machine interface function. A singlechip is used to decode IR remote-controller's remote control information. Keyboard with intelligent controlled switch's control function is designed in this way. This kind of human-machine interface has been debugged and run well in laboratory.
Keyboard Design of Lingyang Microprocessor Based on SPI Interface

LIU Xiao-dong,SHI Yan-yan,LI Shu-bo

DOI: https://doi.org/10.3969/j.issn.1001-1390.2007.02.014

2007-01-01

Abstract:This paper introduces a keyboard extending design scheme using the SPI of LingYang microprocessor.It realizes the management of keyboard by Zhou Li gong intelligent display chip ZLG7289 with SPI interface.The auxiliary circuit is simply-designed and easily-used,also it can manipulate many keys.This design occupies few IO and can be widely used.The hardware circuit and flow chart of software as well as the simulation result are given in the paper.
Implementation of an interface card of a position control system based on PCI bus

Wang Peng,Dong Jingxin,Zhao Changde

DOI: https://doi.org/10.3969/j.issn.1002-4956.2010.05.029

2010-01-01

Abstract:For the purpose of making students handle the technology of computer controlling,an interface card is designed with PCI9054,which is used in the Computer Controlling System class.The card includes interface to PCI(peripheral component interconnect) bus,sample pulse generator,counter of position,D/A,etc.It can support students to realize kinds of controlling method through programming on computer,to solidify the knowledge of computer controlling.
A Singlechip System Menu Management Realized with C51

黄声野,陈秀华,王东生

DOI: https://doi.org/10.3969/j.issn.1000-3428.2004.03.075

2004-01-01

Abstract:The paper introduces a universal and practical method for menus manage . By using Pointer and structure of C51 langue, this novel menu management successfully separates the menu program from the main program, and makes the submenus independent from each other. Details and examples, as well as menu modify method are provided.
The Design of the Infrared Remote-Control Multi-Line Switch Based on Simgle Chip Microcomputer

ZHANG Yu-mei,QU Shi-ru,BAI Shu-lin

DOI: https://doi.org/10.3969/j.issn.1674-649x.2005.04.014

2005-01-01

Abstract:The design of an infrared remote-control multi-line switch is introduced.This switch is based on principle of infrared remote-control and AT89C52 single chip microcomputer controlling.Its system composition and design of hardware and software are presented.In order to achieve exact remote-control,the transmitted signal is divided into 3 parts:the connecting section,the controlling section and the ending section,then the receiver will verify it.It was proved that this kind of remote controller is convenient,reliable and practical after using in remote-control system.
A kind of according to CPLD of a machine and PCI connect a people's design solution

Gao Jianhua

DOI: https://doi.org/10.3969/j.issn.1008-0570.2006.17.082

2006-01-01

Abstract:The article introduce a method of parallel communication between expand MCU and interface of PC104 by CPLD chips (XC95216) of xilinx company. The method saluted some problems of flush bonding OS & bus devices in main board so that integrat-ing the functions of Ethernet card in CPLD (XC95216). The article gave the main source program of VHDL. The method was passed by test of practice.
Serial Interface Connecting Art in Multimedia Central Control System

钟晓流

DOI: https://doi.org/10.3969/j.issn.1009-8097.2009.01.028

2009-01-01

Abstract:This paper introduced standards and principles for all kinds of serial interface in multimedia central control system.The writer summed up and summarized the connecting art and control technique between different serial interface,Some worthwhile experience is withdrawn from his work.
Hardware Design of Serial Communication Between PC and Microcomputer

潘策,陈晓南,杨培林

DOI: https://doi.org/10.3969/j.issn.1004-373x.2003.15.002

2003-01-01

Abstract:In terms of practice,sets forth several solutions of serial communication between PC and microcomputer.Tested by experiment,they can be applied to all kinds of serial communication system and acquire expected effect.
Design of High Speed Communication Hardware and Software Between Intel 16 Bit Microcontroller and PC

Guangshu Hu

1998-01-01

Abstract:This paper addresses high speed communication solution between 16 bit microcontrollerbased data acquisition system and PC/AT compatible computer. After 16 bit Industry Standard Architecture (ISA) peripheral interface of PC is analysed, a 16 bit parallel communication card is developed with three kinds of optional modes: poll, interrupt and DMA. On the side of microcontroller system a 16 bit parallel port is constructed to accommodate the ISA card inserted in the PC. The communication software is written in both assembly languages. The whole communication system employs hardware strobe and acknowledgement and a single stage buffer (MI/OM) with the merits of low complexity and reliable performance. The scheme presented here greatly satisfies the requirement of high speed data communication between microcontroller and PC and has been applied to actual mass storage data acquisition and analysis system.
The design and virtual simulation of MCU system based on I~2C bus

Xie Jing

Abstract:At present,MCS51 series,ATMEL89 series,68HC05 series microcontroller applications is very broad,but they did not I2C bus interface,limiting the use of these systems with I2C bus interface device applications.This paper introduces the interface design and programming of A/D conversion based on I2C Bus and the model for MCU system under Proteus simulation environment.At last,simulation was made about the A/D conversion based on I2C Bus.

Computer Science,Engineering
CONTROLLER OF H.D.CLEANER AND PLURAL SEGREGATOR BASED ON MICROCONTROLLER

周强,王曙光,王孟效

DOI: https://doi.org/10.3969/j.issn.1000-5811.2004.06.020

2004-01-01

Abstract:The design of an intelligent meter based on 51 series microcontroller is introduced, which is used to control some machine in the papermaking assemble to complete sequence control. The paper presents its hardware circuit and program diagram, setting forth the nucleus technology of software, hardware and anti-interference design in detail.

A new interface between single-chip microcomputer and general keyboard of AT computer

Based on the single chip microcomputer proteus the A/D transformation design and simulation

Design and Implementation of Keyboard Interface Based on Single-chip Microcomputer

Design of Data Communication Interface of Data Acquirement System Based on USB

A Method of Interactive Interface for Embedded ControIIer

Implementation of Serial Communication between PLC and Single-chip Microcomputer

Serial Port Control of SPI Devices Based on Single Chip Microcomputer

High Fidelity Control and Display Unit Simulation Method

In System Programming Design of 51 Microcontroller Base on USB Interface

Serial Communication Controlling LCM Displaying Based on AT89S52

Design of Manual-Machine Interface of Intelligent-Controlled Switch

Keyboard Design of Lingyang Microprocessor Based on SPI Interface

Implementation of an interface card of a position control system based on PCI bus

A Singlechip System Menu Management Realized with C51

The Design of the Infrared Remote-Control Multi-Line Switch Based on Simgle Chip Microcomputer

A kind of according to CPLD of a machine and PCI connect a people's design solution

Serial Interface Connecting Art in Multimedia Central Control System

Hardware Design of Serial Communication Between PC and Microcomputer

Design of High Speed Communication Hardware and Software Between Intel 16 Bit Microcontroller and PC

The design and virtual simulation of MCU system based on I~2C bus

CONTROLLER OF H.D.CLEANER AND PLURAL SEGREGATOR BASED ON MICROCONTROLLER