Abstract:The object of research is the black liquor of the alkaline pulping sample Paulownia Clone in Vitro 112® with active alkali consumption of 14, 18 and 22 % in Na2O units from the mass of completely dry raw materials. The problem solved in the work is related to the formation of waste in the form of black liquor during pulp production. It is noted that as a result of the production of 1 ton of cellulose, up to 7 tons of black liquor is formed. In the course of the work, an analysis of the total titrated and active alkalinity in the white and black liquor after cooking paulownia wood was carried out, and the pH value was determined. The dependence of the content of dry substances in black liquor on the consumption of active alkali, the duration of cooking, the presence of a catalyst, and the final temperature of the delignification process is given. The amount of organic and mineral components of dry substances of black liquor per 1 ton of air-dry fibrous semi-finished products was calculated. It was established that with an increase in temperature by 20 °C (from 150 to 170 °C) and a duration of approximately 1.5 times (from 60 to 90 min and from 90 to 150 min), with the same consumption of active alkali and the use of a catalyst in the conditions after sodium pulping, the content of dry substances in the black liquor increases by 1.5–3 %. This regularity is explained by the transition into the solution of a greater number of dissolution products of lignin, hemicelluloses, and mineral substances. Estimated values for the content of mineral and organic substances in black liquor after cooking paulownia wood for a duration of 150 min and a final temperature of 170 °C at different consumptions of active alkali and the use of catalysts in the form of anthraquinone and ethyl alcohol are within the range of 1024-1518 kg per 1 ton dry pulps of normal yield and can be used in practice. The obtained results can be used to form an assessment of the black liquor as an additional resource potential for the economy of production.

Combined Alkali Precipitation and Bioaugmentation Process for the Treatment of Black Liquor under Alkaline Condition

Pretreatment of Lignocellulosic Biomass with Recycled Black Liquor for Sugar Production

Bio-Refractory Dissolved Organic Matter and Colorants in Cassava Distillery Wastewater: Characterization, Coagulation Treatment and Mechanisms

Research on the Pretreatment of Black Liquor Produced from Refined Cotton Production by Acidification-Coagulation-Micro-electrolysis

Treatment of Wastewater of Acid-Precipitation Black Liquor with Resin Adsorption Process

The treatment of black liquor from straw pulp by electrolytic process

Pretreatment of black liquor from refined cotton production by acidification and adsorption using activated carbon fiber

Recycling of Black Liquor for Treating Sugarcane Bagasse at Low Temperature to Attain High Ethanol Production without Washing Step

Comparative Study on the Treatment of Straw Pulping Black Liquid by Acid-Precipitation and Alkali-Precipitation

Pretreatment of a textile wastewater from alkali reduction,printing and dyeing operations

Revisiting alkali pretreatment to transform lignocellulose fermentation with integration of bioprocessible lignin

Vacuum-assisted black liquor-recycling enhances the sugar yield of sugarcane bagasse and decreases water and alkali consumption

Experimental Study on the Treatment of Papermaking Black Liquor by the Complicating of Four Coagulants

Detoxification of pulping black liquor with Pleurotus ostreatus or recombinant Pichia pastoris followed by CuO/TiO2/visible photocatalysis

Application of Fe(II)/peroxymonosulfate for efficient alkali lignin wastewater treatment: Insight into the synergistic interactions between redox reactions and coagulation

Black liquor increases methane production from excess pulp and paper industry sludge

Characteristics of black liquor after alkaline delignification of paulownia wood

Removal of melanoidin from baker yeast plant wastewater: A comparative study on chemical and biological processes

Treatability Of Kraft Spent Liquor By Microfiltration And Ultrafiltration

Design and optimization of the continuous separation process for lignin and alkali by 'Extended Separation Volume' method

Highly efficient lignin removal from the waste liquor of chemical pulping with an integrated polyaluminium chloride-assisted acidification/activated carbon adsorption process