Development of Nano NixMgyO Solid Solutions with Outstanding Anti-Carbon Deposition Capability for the Steam Reforming of Methanol

Xiang Luo,Yu Hong,Fuchen Wang,Siqi Hao,Chengheng Pang,Edward Lester,Tao Wu
DOI: https://doi.org/10.1016/j.apcatb.2016.04.031
2016-01-01
Abstract:In this study, different types of nano NixMgyO solid solutions for the steam reforming of methanol were prepared via three different preparation methods. The solid solutions were characterised systematically by using a suite of characterisation techniques. TEM analysis demonstrated that Ni particles in these solid solutions were in nano-scale with an average size of 9.6-12 nm. The catalytic performance of these catalysts was evaluated using a fixed-bed reactor operated under atmospheric pressure at four different temperatures, i.e., 400, 500, 600 and 700 degrees C, and at two steam-to-carbon ratios (S/C), i.e., S/C= 1 and 3. Results showed that the nano NixMgyO material (NixMgyO-hydro), which was prepared using a hydrothermal method, achieved the highest methanol conversion efficiency of 97.4% and hydrogen yield of 58.5% under a S/C ratio of 3. The evaluation on carbon deposition resistance showed that nano NixMgyO-hydro had no detectable carbon deposited under a S/C ratio of 3. In addition, physical and chemical properties of these catalysts were also studied by using H-2-Temperature Programmed Reduction/Desorption(H-2-TPR/D), CO2-Temperature-Programmed Desorption(CO2-TPD) and X-ray Photoelectron Spectroscopy(XPS). The outstanding carbon deposition resistance of NixMgyO-hydro was attributed to the "isolation effect" of the NixMgyO solid solution structure, which restricts Ni nano particles from aggregation. The high basicity of the surface of NixMgyO-hydro catalyst also resulted in the enhanced adsorption of CO2 and therefore contributed to anti-carbon deposition by providing oxygen to promote the gasification reaction between carbon and CO2. (C) 2016 Elsevier B.V. All rights reserved.
What problem does this paper attempt to address?