Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

Evolution Mechanism of Surface Nano-Crystallization of Tungsten-Copper Alloys

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Ultrafine-grained surface layer of tungsten via a simple two-step microstructure modulation

Effect of Microstructure Refinement on Surface Morphology and Dynamic Mechanical Properties of W-Cu Alloys

Nanostructure Evolution and Surface Modification of Tungsten Exposed to Low Energy, High Flux Deuterium Plasma

Surface Nanocrystallization of Pure Cu Induced by Ultrasonic Shot Peening

Microstructure and Characterization of Surface Nanocrystallization of Aluminum Alloy

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

Nanocrystallization and Texture Transformation in the Surface Layer of Copper Induced by Surface Mechanical Attrition

Microstructure Refinement Mechanism of Undercooled Cu55Ni45 Alloys

In situ observation of intergranular fracture propagation in nanocrystalline freestanding ultrathin tungsten film

Surface morphology and crystal orientation of electrodeposited tungsten coatings with different pulse parameters

Microstructure and Mechanical Properties of Nanocrystalline Tungsten Thin Films

Theoretical and numerical studies of surface microstructural transformation in ultrasonic elliptical vibration cutting tungsten heavy alloys

Mechanisms of nanostructure and metastable phase formations in the surface melted layers of a HCPEB-treated D2 steel

Microstructural evolution of Cu/W nano-multilayers filler metal during thermal treatment

Fabrication of nanocrystalline and ultra-hard tungsten alloy by dual particles dispersion strengthening

Evolution Mechanism of Nanocrystalline Tungsten-Carbon and Effects on Tungsten Implanted Amorphous Hydrogenated Carbon

Fabrication and Stability of Ultrafine ZrC Nanoparticles Dispersion Strengthened Sub-Micrometer Grained W Alloy

Grain Refinement Mechanism under High Strain-Rate Deformation in Machined Surface During High Speed Machining Ti6Al4V

Surface Nanocrystallization Mechanism of a Rare Earth Magnesium Alloy Induced by HVOF Supersonic Microparticles Bombarding