Abstract:No AccessTechnical NoteNumerical Investigation of Heat and Mass Transfer on an Anti-Icing Inlet ConeJ. Zhu, W. Dong, M. Zheng, G. Lei and Q. ZhaoJ. ZhuShanghai Jiao Tong University, 200240 Shanghai, People's Republic of China, W. DongShanghai Jiao Tong University, 200240 Shanghai, People's Republic of China, M. ZhengShanghai Jiao Tong University, 200240 Shanghai, People's Republic of China, G. LeiShanghai Jiao Tong University, 200240 Shanghai, People's Republic of China and Q. ZhaoChina Gas Turbine Establishment, 610500 Chengdu, People's Republic of ChinaPublished Online:15 Apr 2016https://doi.org/10.2514/1.B35875SectionsRead Now ToolsAdd to favoritesDownload citationTrack citations ShareShare onFacebookTwitterLinked InRedditEmail About References [1] Qiu X. and Han F., Aircraft Anti-Icing System, Compilation and Examination Group of Aero Specialized Teaching Materials, Beijing, 1985, pp. 71–73, 179–180 (in Chinese). Google Scholar[2] AI-Khalil K. M., Ferguson T. W. and Phillips D. M., "A Hybrid Anti-Icing Ice Protection System," 35th Aerospace Sciences Meeting and Exhibit, AIAA Paper 1997-0302, Jan. 1997. LinkGoogle Scholar[3] Burick R. A. and Ryan R. J., "FAA Certification of the Lockheed Martin C-130J Transport Ice Protection System," 24th Atmospheric Flight Mechanics Conference, AIAA Paper 1999-4016, 1999. LinkGoogle Scholar[4] Planquart P., Borre G. V. and Buchlin J. M., "Experimental and Numerical Optimization of a Wing Leading Edge Hot Air Anti-Icing System," 43rd AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2005-1277, Jan. 2005. LinkGoogle Scholar[5] Papadakis M., Wong S. H., Yeong H. and Wong S. C., "Icing Tunnel Experiments with a Hot Air Anti-Icing System," 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2008-0444, Jan. 2008. LinkGoogle Scholar[6] Dong W., Zhu J., Zhou Z. and Chi X., "Heat Transfer and Temperature Analysis of Aero-Engine Strut Under Under Icing Conditions," Journal of Aircraft, Vol. 52, No. 1, 2015, pp. 216–225. doi:https://doi.org/10.2514/1.C032107 LinkGoogle Scholar[7] Dong W., Zhu J. and Zhao Q. Y., "Numerical Simulation Analysis of a Guide Vane Hot Air Anti-Icing System," 42nd AIAA Thermophysics Conference, AIAA Paper 2011-3944, June 2011. LinkGoogle Scholar[8] AI-Khalil K. M., Miller D. and Wright W. B., "Validation of NASA Thermal Ice Protection Computer Codes. 3—The Validation of ANTICE," 35th Aerospace Sciences Meeting and Exhibit, AIAA Paper 1997-0051, Jan. 1997. LinkGoogle Scholar[9] Wright W. B., "LEWICE 2.2 Capabilities and Thermal Validation," 40th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2002-0383, Jan. 2002. LinkGoogle Scholar[10] Nakakita K., Nadarajah S. and Habashi W., "Toward Real-Time Aero-Icing Simulation of Complete Aircraft via FENSAP-ICE," Journal of Aircraft, Vol. 47, No. 1, 2010, pp. 96–109. doi:https://doi.org/10.2514/1.44077 LinkGoogle Scholar[11] Hedde T. and Guffond D., "Improvement of the ONERA 3D Icing Code, Comparison with 3D Experimental Shapes," 31st Aerospace Sciences Meeting, AIAA Paper 1993-0169, Jan. 1993. LinkGoogle Scholar[12] Eberhardt D. S., Kim B., Ok H., Li W., Taflin D. and Namdar B., "BUWICE—An Interactive Icing Program Applied to Engine Inlets," 28th Joint Propulsion Conference and Exhibit, AIAA Paper 1992-3179, July 1992. LinkGoogle Scholar[13] Morency F., Tezok F. and Paraschivoiu I., "Anti-Icing System Simulation Using CANICE," Journal of Aircraft, Vol. 36, No. 6, 1999, pp. 999–1006. doi:https://doi.org/10.2514/2.2541 LinkGoogle Scholar[14] Wright W. B., Gent R. W. and Guffond D., "DRA/NASA/ONEAR Collaboration on Icing Research, Part 2—Prediction of Airfoil Ice Accretion," NASA CR202349, 1997. Google Scholar[15] Bourgault Y., Boutanios Z. and Habashi W. G., "Three-Dimensional Eulerian Approach to Droplet Impingement Simulation Using FENSAPICE, Part 1: Model, Algorithm, and Validation," Journal of Aircraft, Vol. 37, No. 1, 2000, pp. 95–103. doi:https://doi.org/10.2514/2.2566 LinkGoogle Scholar[16] Zhu J., Dong W. and Cai Y. L., "Numerical Study of Water Droplets' Heat and Mass Transfer Characteristics in an Entry Strut's Icing Test," ASME Turbo Expo 2012 , American Soc. of Mechanical Engineers Paper GT2012-68306, Fairfield, NJ, 2012. Google Scholar[17] Hamed A., Das K. and Basu D., "Numerical Simulations of Ice Droplet Trajectories and Collection Efficiency on Aero-Engine Rotating Machinery," 43rd AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2005-1248, Jan. 2005. LinkGoogle Scholar[18] Wright W. B., Potapczuk M. G. and Levinson L. H., "Comparison of LEWICE and GlennICE in the SLD Regime," 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2008-0439, Jan. 2008. LinkGoogle Scholar[19] Villedieu P. H., Trontin P., Guffond D. and Bobo D., "SLD Lagrangian Modeling and Capability Assessment in the Frame of ONERA 3D Icing Suite," 4th AIAA Atmospheric and Space Environments Conference, AIAA Paper 2012-3132, June 2012. LinkGoogle Scholar[20] Messinger B. L., "Equilibrium Temperature of an Unheated Icing Surface as a Function of Air Speed," Journal of the Aeronautical Sciences, Vol. 20, No. 1, 1953, pp. 29–42. doi:https://doi.org/10.2514/8.2520 LinkGoogle Scholar[21] Wright W. B., Keith T. G. and De Witt K. J., "Transient Two Dimensional Heat Transfer Through a Composite Body with Application to Deicing of Aircraft Components," 26th Aerospace Sciences Meeting, AIAA Paper 1988-0358, Jan. 1988. LinkGoogle Scholar[22] Wright W. B., Keith T. G. and DeWitt K. J., "Numerical Simulation of Icing, Deicing, and Shedding," 29th Aerospace Sciences Meeting, AIAA Paper 1991-0665, Jan. 1991. LinkGoogle Scholar[23] Al-Khalil K. M., Keith T. G., De Witt K. J., Nathman J. K. and Dietrich D. A., "Thermal Analysis of Engine Inlet Anti-Icing Systems," Journal of Propulsion and Power, Vol. 6, No. 5, 1990, pp. 628–634. doi:https://doi.org/10.2514/3.23264 JPPOEL 0748-4658 LinkGoogle Scholar[24] Al-Khalil K. M., Keith T. G. and DeWitt K. J., "Icing Calculations on a Typical Commercial Jet Engine Inlet Nacelle," 32nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 1994-0610, Jan. 1994. LinkGoogle Scholar[25] Liu H. H. T. and Hua J., "Three-Dimensional Integrated Thermodynamic Simulation for Wing Anti-Icing System," Journal of Aircraft, Vol. 41, No. 6, 2004, pp. 1291–1297. doi:https://doi.org/10.2514/1.5594 LinkGoogle Scholar[26] Lee J., Rigby D., Wright W. and Choo Y., "Analysis of Thermal Ice Protection System (TIPS) with Piccolo Tube Using State-of-the-Art Software," 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2006-1011, Jan. 2006. LinkGoogle Scholar[27] Saeed F., Norency F. and Paraschivoiu I., "Numerical Simulation of a Hot-Air Anti-Icing System," 38th Aerospace Sciences Meeting and Exhibit, AIAA Paper 2000-0630, Jan. 2000. LinkGoogle Scholar[28] Pellissier M. P. C., Habashi W. G. and Peueyo A., "Optimization via FENSAP-ICE of Aircraft Hot-Air Anti-Icing Systems," Journal of Aircraft, Vol. 48, No. 1, 2011, pp. 265–276. doi:https://doi.org/10.2514/1.C031095 LinkGoogle Scholar[29] Lee S. and Loth E., "Simulation of Icing on a Cascade of Stator Blades," Journal of Propulsion and Power, Vol. 24, No. 6, 2008, pp. 1309–1316. doi:https://doi.org/10.2514/1.37810 JPPOEL 0748-4658 LinkGoogle Scholar[30] Wright W. B., Jorgenson P. C. E. and Veres J. P., "Mixed Phase Modeling in GlennICE with Application to Engine Icing," AIAA Atmospheric and Space Environments Conference, AIAA Paper 2010-7674, Aug. 2010. LinkGoogle Scholar[31] Das K., Hamed A. and Basu D., "Ice Shape Prediction for Turbofan Rotating Blades," 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2006-0209, Jan. 2006. LinkGoogle Scholar[32] Dong W., Zhu J. J., Zheng M. and Wang R., "Numerical Study of Ice Accretion on Rotating Aero-Engine Cone," Proceedings of the 29th Congress of the International Council of the Aeronautical Sciences, International Council of the Aeronautical Sciences Paper ICAS 2014-0035, Stockholm, 2014. Google Scholar[33] Dong W., Zhu J. J., Zheng M. and Chen Y., "Thermal Analysis and Testing of Nonrotating Cone with Hot-Air Anti-Icing System," Journal of Propulsion and Power, Vol. 31, No. 3, 2015, pp. 896–903. doi:https://doi.org/10.2514/1.B35378 JPPOEL 0748-4658 LinkGoogle Scholar[34] "ANSYS Fluent User's Guide Release 14.5," ANSYS, Canonsburg, PA, 2012. Google Scholar[35] Menter F. R., "Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications," AIAA Journal, Vol. 32, No. 8, 1994, pp. 1598–1605. doi:https://doi.org/10.2514/3.12149 AIAJAH 0001-1452 LinkGoogle Scholar[36] Min X., Dong W. and Zhu J., "Analysis of Gravity Influence on the Droplet Impingement Property," Gas Turbine Experiment and Research, Vol. 23, No. 3, 2010, pp. 42–45 (in Chinese). Google Scholar[37] Clift R., Grace J. R. and Weber M. E., "Bubbles, Drops and Particles," Academic Press, New York, 1978, pp. 111–112. Google Scholar[38] Cai Y. and Dong W., "Calculation and Analysis of Heat and Mass Transfer for Water Droplet in Icing Tunnel Test," Aeroengine, Vol. 39, No. 3, 2013, pp. 36–40 (in Chinese). Google Scholar[39] Young R. M. and Pfender E., "Nusselt Number Correlations for Heat Transfer to Small Spheres in Thermal Plasma Flows," Plasma Chemistry and Plasma Processing, Vol. 7, No. 2, 1987, pp. 211–229. doi:https://doi.org/10.1007/BF01019179 PCPPDW 0272-4324 CrossrefGoogle Scholar[40] Kays W. M., Crawford M. E. and Weigand B., "Convective Heat and Mass Transfer," 4th ed., Higher Education Press, Beijing, 2007, p. 355 (in Chinese). Google Scholar[41] Yang S. M. and Tao W. Q., "Heat Transfer," 4th ed., Higher Education Press, Beijing, 2006, p. 547 (in Chinese). Google Scholar[42] "ANSYS Fluent UDF Manual Release 14.5," ANSYS, Canonsburg, PA, 2012. Google Scholar[43] Roy J. S., "A Model for Predicting Mixed-Phase Flow in Ground Test Facilities," 37th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 1999-0308, Jan. 1999. Google Scholar Previous article

Abstract:No AccessTechnical NotesOptimal Tolerance Allocation in Blade Manufacturing by Sensitivity-Based Performance Impact EvaluationJiaqi Luo, Yao Zheng and Feng LiuJiaqi LuoZhejiang University, 310027 Hangzhou, People’s Republic of China*Principal Investigator, School of Aeronautics and Astronautics; .Search for more papers by this author, Yao ZhengZhejiang University, 310027 Hangzhou, People’s Republic of China†Professor, School of Aeronautics and Astronautics; .Search for more papers by this author and Feng LiuUniversity of California, Irvine, Irvine, California 92697-3975‡Professor, Department of Mechanical and Aerospace Engineering; . Fellow AIAA.Search for more papers by this authorPublished Online:18 May 2020https://doi.org/10.2514/1.B37718SectionsRead Now ToolsAdd to favoritesDownload citationTrack citations ShareShare onFacebookTwitterLinked InRedditEmail About References [1] Bammert K. and Sandstede H., “Influence of Manufacturing Tolerances and Surface Roughness of Blades on the Performance of Turbines,” Journal of Engineering for Power, Vol. 98, No. 1, 1976, pp. 29–36. https://doi.org/10.1115/1.3446107 CrossrefGoogle Scholar[2] Roelke R. and Haas J., “The Effect of Rotor Blade Thickness and Surface Finish on the Performance of a Small Axial Flow Turbine,” Journal of Engineering for Power, Vol. 105, No. 2, 1983, pp. 377–382. https://doi.org/10.1115/1.3227426 Google Scholar[3] Garzon V. and Darmofal D., “Impact of Geometric Variability on Axial Compressor Performance,” Journal of Turbomachinery, Vol. 125, No. 4, 2003, pp. 692–703. https://doi.org/10.1115/1.1622715 CrossrefGoogle Scholar[4] Dong Z., Hu W. and Xue D., “New Production Cost-Tolerance Models for Tolerance Synthesis,” Journal of Engineering for Industry, Vol. 116, No. 2, 1994, pp. 199–206. https://doi.org/10.1115/1.2901931 Google Scholar[5] Edwards R., Asghar A., Woodason R., LaViolette M., Goni Boulama K. and Allan W., “Numerical Investigation of the Influence of Real World Blade Profile Variations on the Aerodynamic Performance of Transonic Nozzle Guide Vanes,” Journal of Turbomachinery, Vol. 134, No. 2, 2012, Paper 021014. https://doi.org/10.1115/1.4003050 Google Scholar[6] Lange A., Voigt M., Vogeler K., Schrapp H., Johann E. and Gümmer V., “Impact of Manufacturing Variability on Multistage High-Pressure Compressor Performance,” Journal of Engineering for Gas Turbines and Power, Vol. 134, No. 11, 2012, Paper 112601. https://doi.org/10.1115/1.4007167 Google Scholar[7] Schnell R., Lengyel-Kampmann T. and Nicke E., “On the Impact of Geometric Variability on Fan Aerodynamic Performance, Unsteady Blade Row Interaction, and Its Mechanical Characteristics,” Journal of Turbomachinery, Vol. 136, No. 9, 2014, Paper 091005. https://doi.org/10.1115/1.4027218 CrossrefGoogle Scholar[8] Parussini L., Pediroda V. and Poloni C., “Prediction of Geometric Uncertainty Effects on Fluid Dynamics by Polynomial Chaos and Fictitious Domain Method,” Computers and Fluids, Vol. 39, No. 1, 2010, pp. 137–151. https://doi.org/10.1016/j.compfluid.2009.07.008 CrossrefGoogle Scholar[9] Dow E. and Wang Q., “The Implications of Tolerance Optimization on Compressor Blade Design,” Journal of Turbomachinery, Vol. 137, No. 10, 2015, Paper 101008. https://doi.org/10.1115/1.4030791 Google Scholar[10] Zamboni G., Banks G. and Bather S., “Gradient-Based Adjoint and Design of Experiment CFD Methodologies to Improve the Manufacturability of High Pressure Turbine Blades,” ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, ASME Paper GT2016-56042, Fairfield, NJ, 2016. https://doi.org/10.1115/GT2016-56042 Google Scholar[11] Yang J., Xiong J., McBean I., Havakechian S., Liu F. and Luo J., “Performance Impact of Manufacturing Variations for Multistage Steam Turbines,” Journal of Propulsion and Power, Vol. 33, No. 4, 2017, pp. 1031–1036. https://doi.org/10.2514/1.B36022 LinkGoogle Scholar[12] Jameson A., “Aerodynamic Design via Control Theory,” Journal of Scientific Computing, Vol. 3, No. 3, 1988, pp. 233–260. https://doi.org/10.1007/BF01061285 CrossrefGoogle Scholar[13] Luo J., Xiong J., McBean I. and Liu F., “Three-Dimensional Aerodynamic Design Optimization of a Turbine Blade by Using an Adjoint Method,” Journal of Turbomachinery, Vol. 133, No. 1, 2011, Paper 011026. https://doi.org/10.1115/1.4001166 CrossrefGoogle Scholar[14] Marta A. and Shankaran S., “Assessing Turbomachinery Performance Sensitivity to Boundary Conditions Using Control Theory,” Journal of Propulsion and Power, Vol. 30, No. 5, 2014, pp. 1281–1294. https://doi.org/10.2514/1.B35087 LinkGoogle Scholar[15] Walther B. and Nadarajah S., “Adjoint-Based Constrained Aerodynamic Shape Optimization for Multistage Turbomachines,” Journal of Propulsion and Power, Vol. 31, No. 5, 2015, pp. 1298–1319. https://doi.org/10.2514/1.B35433 LinkGoogle Scholar[16] Aissa M., Maffuli R., Mueller L. and Verstraete T., “Optimisation of a Turbine Inlet Guide Vane by Gradient-Based and Metamodel-Assisted Methods,” International Journal of Computational Fluid Dynamics, Vol. 33, Nos. 6–7, 2019, pp. 302–316. https://doi.org/10.1080/10618562.2019.1683168 CrossrefGoogle Scholar[17] Ghate D. and Giles M., “Efficient Hessian Calculation Using Automatic Differentiation,” 25th AIAA Applied Aerodynamics Conference, AIAA Paper 2007-4059, 2007. https://doi.org/10.2514/6.2007-4059 LinkGoogle Scholar[18] Rumpfkeil M. and Mavriplis D., “Efficient Hessian Calculations Using Automatic Differentiation and the Adjoint Method with Applications,” AIAA Journal, Vol. 48, No. 10, 2010, pp. 2406–2417. https://doi.org/10.2514/1.J050451 LinkGoogle Scholar[19] Papadimitriou D. and Giannakoglou K., “Computation of the Hessian Matrix in Aerodynamic Inverse Design Using Continuous Adjoint Formulations,” Computers and Fluids, Vol. 37, No. 8, 2008, pp. 1029–1039. https://doi.org/10.1016/j.compfluid.2007.11.001 CrossrefGoogle Scholar[20] Papadimitriou D. and Giannakoglou K., “Direct, Adjoint and Mixed Approaches for the Computation of Hessian in Airfoil Design Problems,” International Journal for Numerical Methods in Fluids, Vol. 56, No. 10, 2008, pp. 1929–1943. https://doi.org/10.1002/(ISSN)1097-0363 CrossrefGoogle Scholar[21] Hicken J. E., “Inexact Hessian-Vector Products in Reduced-Space Differential-Equation Constrained Optimization,” Optimization and Engineering, Vol. 15, No. 3, 2014, pp. 575–608. https://doi.org/10.1007/s11081-014-9258-6 CrossrefGoogle Scholar[22] Shi-Dong D. and Nadarajah S., “Approximate Hessian for Accelerated Convergence of Aerodynamic Shape Optimization Problems in an Adjoint-Based Framework,” Computers and Fluids, Vol. 168, May 2018, pp. 265–284. https://doi.org/10.1016/j.compfluid.2018.04.019 CrossrefGoogle Scholar[23] Schillings C., Schimidt S. and Schulz V., “Efficient Shape Optimization for Certain and Uncertain Aerodynamic Design,” Computers and Fluids, Vol. 46, No. 1, 2011, pp. 78–87. https://doi.org/10.1016/j.compfluid.2010.12.007 CrossrefGoogle Scholar[24] Papadimitriou D. and Papadimitriou C., “Aerodynamic Shape Optimization for Minimum Robust Drag and Lift Reliability Constraint,” Aerospace Science and Technology, Vol. 55, Aug. 2016, pp. 24–33. https://doi.org/10.1016/j.ast.2016.05.005 CrossrefGoogle Scholar[25] Luo J. and Liu F., “Performance Impact of Manufacturing Tolerances for a Turbine Blade Using Second Order Sensitivities,” ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, ASME Paper GT2018-75999, Fairfield, NJ, 2018. https://doi.org/10.1115/GT2018-75999 Google Scholar[26] Luo J. and Liu F., “Statistical Evaluation of Performance Impact of Manufacturing Variability by an Adjoint Method,” Aerospace Science and Technology, Vol. 77, June 2018, pp. 471–484. https://doi.org/10.1016/j.ast.2018.03.030 CrossrefGoogle Scholar[27] Pini M. and Cinnella P., “Hybrid Adjoint-Based Robust Optimization Approach for Fluid-Dynamics Problems,” 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Paper 2013-1814, 2013. https://doi.org/10.2514/6.2013-1814 Google Scholar Previous article Next article FiguresReferencesRelatedDetailsCited byCompressor geometric uncertainty quantification under conditions from near choke to near stallChinese Journal of Aeronautics, Vol. 36, No. 3Uncertainty analysis of global and local performance impact of inflow and geometric uncertainties using sparse grid-based non-intrusive polynomial chaos15 April 2022 | Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol. 236, No. 7A data-driven non-intrusive polynomial chaos for performance impact of high subsonic compressor cascades with stagger angle and profile errorsAerospace Science and Technology, Vol. 129Performance dispersion control of a multistage compressor based on precise identification of critical featuresAerospace Science and Technology, Vol. 129A gradient-based method assisted by surrogate model for robust optimization of turbomachinery bladesChinese Journal of Aeronautics, Vol. 35, No. 10Stochastic aerodynamic analysis for compressor blades with manufacturing variability based on a mathematical dimensionality reduction method29 December 2021 | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 236, No. 10Robust design optimization considering inlet flow angle variations of a turbine cascadeAerospace Science and Technology, Vol. 116 What's Popular Volume 36, Number 4July 2020 CrossmarkInformationCopyright © 2020 by Jiaqi Luo, Yao Zheng, and Feng Liu. Published by the American Institute of Aeronautics and Astronautics, Inc., with permission. All requests for copying and permission to reprint should be submitted to CCC at www.copyright.com; employ the eISSN 1533-3876 to initiate your request. See also AIAA Rights and Permissions www.aiaa.org/randp. TopicsAerodynamic PerformanceAerodynamicsAeronautical EngineeringAeronauticsComputational Fluid DynamicsEquations of Fluid DynamicsFinite Difference MethodFinite Element MethodFlow RegimesFluid DynamicsMonte Carlo MethodNumerical Analysis KeywordsShape FunctionsTurbomachinerySteam TurbinesAerodynamic Shape OptimizationAerodynamic PerformanceEuler EquationsExternal FlowsComputational Fluid DynamicsSingular Value DecompositionFinite Difference MethodAcknowledgmentsThe authors would like to thank the National Natural Science Foundation of China (grant nos. 51676003 and 51976183) and the Fundamental Research Funds for the Central Universities of China (grant no. 2019QNA4058) for supporting the research work.PDF Received26 June 2019Accepted19 April 2020Published online18 May 2020

Numerical Investigation of Heat and Mass Transfer on an Anti-Icing Inlet Cone

Mach Number Effect of Compressible Flow Around A Circular Cylinder

Performance Impact of Manufacturing Variations for Multistage Steam Turbines

Thermal Analysis and Testing of a Cone with Leading Edge Hot Air Anti-icing System

Improved Prediction of Flow Around Airfoil Accreted with Horn or Ridge Ice

Thermal Analysis and Testing of Nonrotating Cone with Hot-Air Anti-Icing System

Numerical Simulation of Hot Air Anti-icing Charateristics of an Aero-engine Strut

Numerical Simulation Analysis of a Guide Vane Hot Air Anti-icing System

NUMERICAL INVESTIGATION OF THE HEAT AND MASS TRANSFER ON ANTI-ICING SURFACE

Experimental Validation and Tightly Coupled Numerical Simulation of Hot Air Anti-Icing System Based on an Extended Mass and Heat Transfer Model

Heat Transfer and Temperature Analysis of an Aeroengine Strut under Icing Conditions

Optimal Tolerance Allocation in Blade Manufacturing by Sensitivity-Based Performance Impact Evaluation

Experimental Study on Icing and Anti-Icing Characteristics of Engine Inlet Guide Vanes

Calculation of the heat transfer and temperature on the aircraft anti-icing surface

Effects of Flow Parameters on Thermal Performance of an Inner-Liner Anti-Icing System with Jets Impingement Heat Transfer

Numerical Analysis of Oil Anti-Icing System Performance of Turboshaft Engine Inlet Strut

Numerical Simulation of Aircraft Icing under Local Thermal Protection State

Numerical simulation of icing effect on aerodynamic characteristics of a wind turbine blade

The icing characteristic of stage 35 compressor blades and its impact on aerodynamic performance

Numerical Simulation of Icing on the Rotating Blade

A parametric study on the effect of liquid water content and droplet median volume diameter on the ice distribution and anti-icing heat estimation of a wind turbine airfoil