Numerical Investigation of Heat and Mass Transfer on an Anti-Icing Inlet Cone
J. Zhu,W. Dong,M. Zheng,G. Lei,Q. Zhao
DOI: https://doi.org/10.2514/1.b35875
2016-01-01
Journal of Propulsion and Power
Abstract:No AccessTechnical NoteNumerical Investigation of Heat and Mass Transfer on an Anti-Icing Inlet ConeJ. Zhu, W. Dong, M. Zheng, G. Lei and Q. ZhaoJ. ZhuShanghai Jiao Tong University, 200240 Shanghai, People's Republic of China, W. DongShanghai Jiao Tong University, 200240 Shanghai, People's Republic of China, M. ZhengShanghai Jiao Tong University, 200240 Shanghai, People's Republic of China, G. LeiShanghai Jiao Tong University, 200240 Shanghai, People's Republic of China and Q. ZhaoChina Gas Turbine Establishment, 610500 Chengdu, People's Republic of ChinaPublished Online:15 Apr 2016https://doi.org/10.2514/1.B35875SectionsRead Now ToolsAdd to favoritesDownload citationTrack citations ShareShare onFacebookTwitterLinked InRedditEmail About References [1] Qiu X. and Han F., Aircraft Anti-Icing System, Compilation and Examination Group of Aero Specialized Teaching Materials, Beijing, 1985, pp. 71–73, 179–180 (in Chinese). Google Scholar[2] AI-Khalil K. M., Ferguson T. W. and Phillips D. M., "A Hybrid Anti-Icing Ice Protection System," 35th Aerospace Sciences Meeting and Exhibit, AIAA Paper 1997-0302, Jan. 1997. LinkGoogle Scholar[3] Burick R. A. and Ryan R. J., "FAA Certification of the Lockheed Martin C-130J Transport Ice Protection System," 24th Atmospheric Flight Mechanics Conference, AIAA Paper 1999-4016, 1999. LinkGoogle Scholar[4] Planquart P., Borre G. V. and Buchlin J. M., "Experimental and Numerical Optimization of a Wing Leading Edge Hot Air Anti-Icing System," 43rd AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2005-1277, Jan. 2005. LinkGoogle Scholar[5] Papadakis M., Wong S. H., Yeong H. and Wong S. C., "Icing Tunnel Experiments with a Hot Air Anti-Icing System," 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2008-0444, Jan. 2008. LinkGoogle Scholar[6] Dong W., Zhu J., Zhou Z. and Chi X., "Heat Transfer and Temperature Analysis of Aero-Engine Strut Under Under Icing Conditions," Journal of Aircraft, Vol. 52, No. 1, 2015, pp. 216–225. doi:https://doi.org/10.2514/1.C032107 LinkGoogle Scholar[7] Dong W., Zhu J. and Zhao Q. Y., "Numerical Simulation Analysis of a Guide Vane Hot Air Anti-Icing System," 42nd AIAA Thermophysics Conference, AIAA Paper 2011-3944, June 2011. LinkGoogle Scholar[8] AI-Khalil K. M., Miller D. and Wright W. B., "Validation of NASA Thermal Ice Protection Computer Codes. 3—The Validation of ANTICE," 35th Aerospace Sciences Meeting and Exhibit, AIAA Paper 1997-0051, Jan. 1997. LinkGoogle Scholar[9] Wright W. B., "LEWICE 2.2 Capabilities and Thermal Validation," 40th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2002-0383, Jan. 2002. LinkGoogle Scholar[10] Nakakita K., Nadarajah S. and Habashi W., "Toward Real-Time Aero-Icing Simulation of Complete Aircraft via FENSAP-ICE," Journal of Aircraft, Vol. 47, No. 1, 2010, pp. 96–109. doi:https://doi.org/10.2514/1.44077 LinkGoogle Scholar[11] Hedde T. and Guffond D., "Improvement of the ONERA 3D Icing Code, Comparison with 3D Experimental Shapes," 31st Aerospace Sciences Meeting, AIAA Paper 1993-0169, Jan. 1993. LinkGoogle Scholar[12] Eberhardt D. S., Kim B., Ok H., Li W., Taflin D. and Namdar B., "BUWICE—An Interactive Icing Program Applied to Engine Inlets," 28th Joint Propulsion Conference and Exhibit, AIAA Paper 1992-3179, July 1992. LinkGoogle Scholar[13] Morency F., Tezok F. and Paraschivoiu I., "Anti-Icing System Simulation Using CANICE," Journal of Aircraft, Vol. 36, No. 6, 1999, pp. 999–1006. doi:https://doi.org/10.2514/2.2541 LinkGoogle Scholar[14] Wright W. B., Gent R. W. and Guffond D., "DRA/NASA/ONEAR Collaboration on Icing Research, Part 2—Prediction of Airfoil Ice Accretion," NASA CR202349, 1997. Google Scholar[15] Bourgault Y., Boutanios Z. and Habashi W. G., "Three-Dimensional Eulerian Approach to Droplet Impingement Simulation Using FENSAPICE, Part 1: Model, Algorithm, and Validation," Journal of Aircraft, Vol. 37, No. 1, 2000, pp. 95–103. doi:https://doi.org/10.2514/2.2566 LinkGoogle Scholar[16] Zhu J., Dong W. and Cai Y. L., "Numerical Study of Water Droplets' Heat and Mass Transfer Characteristics in an Entry Strut's Icing Test," ASME Turbo Expo 2012 , American Soc. of Mechanical Engineers Paper GT2012-68306, Fairfield, NJ, 2012. Google Scholar[17] Hamed A., Das K. and Basu D., "Numerical Simulations of Ice Droplet Trajectories and Collection Efficiency on Aero-Engine Rotating Machinery," 43rd AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2005-1248, Jan. 2005. LinkGoogle Scholar[18] Wright W. B., Potapczuk M. G. and Levinson L. H., "Comparison of LEWICE and GlennICE in the SLD Regime," 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2008-0439, Jan. 2008. LinkGoogle Scholar[19] Villedieu P. H., Trontin P., Guffond D. and Bobo D., "SLD Lagrangian Modeling and Capability Assessment in the Frame of ONERA 3D Icing Suite," 4th AIAA Atmospheric and Space Environments Conference, AIAA Paper 2012-3132, June 2012. LinkGoogle Scholar[20] Messinger B. L., "Equilibrium Temperature of an Unheated Icing Surface as a Function of Air Speed," Journal of the Aeronautical Sciences, Vol. 20, No. 1, 1953, pp. 29–42. doi:https://doi.org/10.2514/8.2520 LinkGoogle Scholar[21] Wright W. B., Keith T. G. and De Witt K. J., "Transient Two Dimensional Heat Transfer Through a Composite Body with Application to Deicing of Aircraft Components," 26th Aerospace Sciences Meeting, AIAA Paper 1988-0358, Jan. 1988. LinkGoogle Scholar[22] Wright W. B., Keith T. G. and DeWitt K. J., "Numerical Simulation of Icing, Deicing, and Shedding," 29th Aerospace Sciences Meeting, AIAA Paper 1991-0665, Jan. 1991. LinkGoogle Scholar[23] Al-Khalil K. M., Keith T. G., De Witt K. J., Nathman J. K. and Dietrich D. A., "Thermal Analysis of Engine Inlet Anti-Icing Systems," Journal of Propulsion and Power, Vol. 6, No. 5, 1990, pp. 628–634. doi:https://doi.org/10.2514/3.23264 JPPOEL 0748-4658 LinkGoogle Scholar[24] Al-Khalil K. M., Keith T. G. and DeWitt K. J., "Icing Calculations on a Typical Commercial Jet Engine Inlet Nacelle," 32nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 1994-0610, Jan. 1994. LinkGoogle Scholar[25] Liu H. H. T. and Hua J., "Three-Dimensional Integrated Thermodynamic Simulation for Wing Anti-Icing System," Journal of Aircraft, Vol. 41, No. 6, 2004, pp. 1291–1297. doi:https://doi.org/10.2514/1.5594 LinkGoogle Scholar[26] Lee J., Rigby D., Wright W. and Choo Y., "Analysis of Thermal Ice Protection System (TIPS) with Piccolo Tube Using State-of-the-Art Software," 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2006-1011, Jan. 2006. LinkGoogle Scholar[27] Saeed F., Norency F. and Paraschivoiu I., "Numerical Simulation of a Hot-Air Anti-Icing System," 38th Aerospace Sciences Meeting and Exhibit, AIAA Paper 2000-0630, Jan. 2000. LinkGoogle Scholar[28] Pellissier M. P. C., Habashi W. G. and Peueyo A., "Optimization via FENSAP-ICE of Aircraft Hot-Air Anti-Icing Systems," Journal of Aircraft, Vol. 48, No. 1, 2011, pp. 265–276. doi:https://doi.org/10.2514/1.C031095 LinkGoogle Scholar[29] Lee S. and Loth E., "Simulation of Icing on a Cascade of Stator Blades," Journal of Propulsion and Power, Vol. 24, No. 6, 2008, pp. 1309–1316. doi:https://doi.org/10.2514/1.37810 JPPOEL 0748-4658 LinkGoogle Scholar[30] Wright W. B., Jorgenson P. C. E. and Veres J. P., "Mixed Phase Modeling in GlennICE with Application to Engine Icing," AIAA Atmospheric and Space Environments Conference, AIAA Paper 2010-7674, Aug. 2010. LinkGoogle Scholar[31] Das K., Hamed A. and Basu D., "Ice Shape Prediction for Turbofan Rotating Blades," 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2006-0209, Jan. 2006. LinkGoogle Scholar[32] Dong W., Zhu J. J., Zheng M. and Wang R., "Numerical Study of Ice Accretion on Rotating Aero-Engine Cone," Proceedings of the 29th Congress of the International Council of the Aeronautical Sciences, International Council of the Aeronautical Sciences Paper ICAS 2014-0035, Stockholm, 2014. Google Scholar[33] Dong W., Zhu J. J., Zheng M. and Chen Y., "Thermal Analysis and Testing of Nonrotating Cone with Hot-Air Anti-Icing System," Journal of Propulsion and Power, Vol. 31, No. 3, 2015, pp. 896–903. doi:https://doi.org/10.2514/1.B35378 JPPOEL 0748-4658 LinkGoogle Scholar[34] "ANSYS Fluent User's Guide Release 14.5," ANSYS, Canonsburg, PA, 2012. Google Scholar[35] Menter F. R., "Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications," AIAA Journal, Vol. 32, No. 8, 1994, pp. 1598–1605. doi:https://doi.org/10.2514/3.12149 AIAJAH 0001-1452 LinkGoogle Scholar[36] Min X., Dong W. and Zhu J., "Analysis of Gravity Influence on the Droplet Impingement Property," Gas Turbine Experiment and Research, Vol. 23, No. 3, 2010, pp. 42–45 (in Chinese). Google Scholar[37] Clift R., Grace J. R. and Weber M. E., "Bubbles, Drops and Particles," Academic Press, New York, 1978, pp. 111–112. Google Scholar[38] Cai Y. and Dong W., "Calculation and Analysis of Heat and Mass Transfer for Water Droplet in Icing Tunnel Test," Aeroengine, Vol. 39, No. 3, 2013, pp. 36–40 (in Chinese). Google Scholar[39] Young R. M. and Pfender E., "Nusselt Number Correlations for Heat Transfer to Small Spheres in Thermal Plasma Flows," Plasma Chemistry and Plasma Processing, Vol. 7, No. 2, 1987, pp. 211–229. doi:https://doi.org/10.1007/BF01019179 PCPPDW 0272-4324 CrossrefGoogle Scholar[40] Kays W. M., Crawford M. E. and Weigand B., "Convective Heat and Mass Transfer," 4th ed., Higher Education Press, Beijing, 2007, p. 355 (in Chinese). Google Scholar[41] Yang S. M. and Tao W. Q., "Heat Transfer," 4th ed., Higher Education Press, Beijing, 2006, p. 547 (in Chinese). Google Scholar[42] "ANSYS Fluent UDF Manual Release 14.5," ANSYS, Canonsburg, PA, 2012. Google Scholar[43] Roy J. S., "A Model for Predicting Mixed-Phase Flow in Ground Test Facilities," 37th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 1999-0308, Jan. 1999. Google Scholar Previous article