Numerical simulation study on the resistance and heat transfer performance of anti-icing device of fin-staggered tube structure in marine intake system
Zhiwei Deng,Zhongyi Wang,Yanhua Wang,Lei Wan
DOI: https://doi.org/10.1016/j.applthermaleng.2024.122619
IF: 6.4
2024-02-16
Applied Thermal Engineering
Abstract:This article is based on the application of a staggered tube bundle anti-icing structure in the air intake ducts of naval vessels. It introduces a fin-staggered tube anti-icing structure designed to enhance the performance of the air intake anti-icing device. The primary performance indicators for the anti-icing device on ships include pressure loss and temperature increase. Friction factor (f) is employed to measure the extent of pressure loss, while the Colburn factor (j) is used to assess heat transfer efficiency, both serving as performance metrics for the structure in this study. Numerical simulations were conducted to calculate f and j within the same velocity range and characteristic scale. Using j/f (1/3) as the standard for calculating comprehensive heat transfer performance (ξ), the ξ0 and ξ were determined for both the staggered tube anti-icing structure and the fin-staggered tube anti-icing structure. The results indicate that when the inlet velocity exceeds 9.2 m/s, the value of ξ/ξ0 is greater than 1, suggesting that the fin-staggered tube anti-icing structure outperforms the prototype staggered tube anti-icing structure in comprehensive heat transfer performance. Through numerical simulations, calculations were performed for the inlet and outlet total pressure loss (ΔP) and inlet and outlet temperature increase (ΔT) of the anti-icing structure under various conditions, including a heat source temperature of 430 K, H n ranging from 16 mm to 18 mm, and S 1 /S 2 ranging from 0.7 to 1.2. This was used to calculate values of f, j, and ξ for different S 1 /S 2 ratios. The calculation results indicate that there exists a specific S 1 /S 2 value at which the ξ of the fin-staggered tube anti-icing structure reaches its peak. The ξ of the selected structure in this paper peaks at an S 1 /S 2 value of 0.85. The calculation method presented in this paper provides valuable reference for the design of air intake heating structures for marine intakes.
energy & fuels,engineering, mechanical,thermodynamics,mechanics