Abstract:The fabrication of microfluidic devices has progressed from cleanroom manufacturing to replica molding in polymers, and more recently to direct manufacturing by subtractive (e.g., laser machining) and additive (e.g., 3D printing) techniques, notably digital light processing (DLP) photopolymerization. However, many methods require technical expertise and DLP 3D printers remain expensive at a cost ∼15-30 K USD with ∼8 M pixels that are 25-40 μm in size. Here, we introduce (i) the use of low-cost (∼150-600 USD) liquid crystal display (LCD) photopolymerization 3D printing with ∼8-58 M pixels that are 18-35 μm in size for direct microfluidic device fabrication, and (ii) a poly(ethylene glycol) diacrylate-based ink developed for LCD 3D printing (PLInk). We optimized PLInk for high resolution, fast 3D printing and biocompatibility while considering the illumination inhomogeneity and low power density of LCD 3D printers. We made lateral features as small as 75 μm, 22 μm-thick embedded membranes, and circular channels with a 110 μm radius. We 3D printed microfluidic devices previously manufactured by other methods, including an embedded 3D micromixer, a membrane microvalve, and an autonomous capillaric circuit (CC) deployed for interferon-γ detection with excellent performance (limit of detection: 12 pg mL-1, CV: 6.8%). We made PLInk-based organ-on-a-chip devices in 384-well plate format and produced 3420 individual devices within an 8 h print run. We used the devices to co-culture two spheroids separated by a vascular barrier over 5 days and observed endothelial sprouting, cellular reorganization, and migration. LCD 3D printing together with tailored inks pave the way for democratizing access to high-resolution manufacturing of ready-to-use microfluidic and organ-on-a-chip devices by anyone, anywhere.

Simple, Cost-Effective 3d Printed Microfluidic Components for Disposable, Point-Of-Care Colorimetric Analysis

Rapid Fabrication of Modular 3D Paper-Based Microfluidic Chips Using Projection-Based 3D Printing

3D Printed Paper-Based Microfluidic Analytical Devices

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

A Low-Cost, Disposable and Portable Inkjet-Printed Biochip for the Developing World

Printing 3D Microfluidic Chips with a 3D Sugar Printer

Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review

Chemical and Biochemical Analysis on Lab-on-a-chip Devices Fabricated Using Three-Dimensional Printing

3D Printing of Individualized Microfluidic Chips with DLP-Based Printer

Characterization and evaluation of 3D printed microfluidic chip for cell processing

From Microfluidic Paper-Based Analytical Devices to Paper-Based Biofluidics with Integrated Continuous Perfusion.

Inexpensive and rapid fabrication of PDMS microfluidic devices for biological testing applications using low cost commercially available 3D printers

Low-cost Fabrication of a Paper-Based Microfluidic Using a Folded Pattern Paper.

3D Printing Solutions for Microfluidic Chip-To-World Connections

Three-dimensional Microporous Hollow Fiber Membrane Microfluidic Device Integrated with Selective Separation and Capillary Self-Driven for Point-of-care Testing.

Research Progress of 3D Printing Microfluidic Chip

A review of the recent achievements and future trends on 3D printed microfluidic devices for bioanalytical applications

Making Healthcare Accessible: A Rapid Clean-Room-Free Fabrication Strategy for Microfluidics-Driven Biosensors Based on Coupling Stereolithography and Hot Embossing

High-resolution low-cost LCD 3D printing for microfluidics and organ-on-a-chip devices

Typography-Like 3D-Printed Templates for the Lithography-Free Fabrication of Microfluidic Chips.

High-resolution low-cost LCD 3D printing of microfluidics