Abstract:The performance of Al-0.1Sn-0.1In-0.05Ga alloys as anodes for Al–air batteries is investigated for low carbon development needs. Low melting point elemental metals were added to high purity Al (99.9999 %) using micro alloying, either in a diffuse distribution or as a second phase, depending on their solid solubility in the Al. The correlation between the microstructure and electrochemical properties of Al-0.1Sn-0.1In-0.05Ga alloys was established. The experiments were conducted in a 4.0 mol/l NaOH solution. The electrochemical characteristics of the Al-0.1Sn-0.1In-0.05Ga anodes were assessed by using potentiodynamic polarization, electrochemical impedance spectroscopy, and galvanostatic discharge experiments. It is indicated that the inclusion of Sn, In, and Ga elements results in improved corrosion resistance and discharge activity in the anode composed of Al. This can be attributed to the presence of nano-scale second phase particles and a uniform microstructure in the Al-0.1Sn-0.1In-0.05Ga alloy, which effectively inhibits localized crystallographic corrosion. In comparison to pure Al, the Al-0.1Sn-0.1In-0.05Ga alloy exhibits a reduction in corrosion current density by 24.77 % and an increase in anode efficiency by 40 %. When discharged at a current density of 10 mA/cm 2 , an Al–air battery with an Al-0.1Sn-0.1In-0.05Ga anode exhibits a discharge voltage of 1.523 V, a discharge capacity of 2214 Ah/kg, and an anode efficiency of 74.31 %. The research has the potential to advance Al–air batteries' progress and significantly contribute to global sustainability efforts.

Electrochemical Performance of Mg-3Al Modified with Ga, in and Sn As Anodes for Mg-Air Battery

The Dependence of Electrochemical Behavior and Discharge Performance on the Zn/Gd Ratio of Mg-Li-Zn-Gd Anodes for Mg-Air Batteries

Electrochemical Investigations on AZ Series Magnesium Alloys as Anode Materials in a Sodium Chloride Solution

Effects of trace amounts of Sn, Ca, and Cu on the electrochemical properties and discharge performance of Mg-2Zn-1Gd-0.5Zr as an anode for Mg-air battery

Electrochemical Performance of Al-1Zn-0.1In-0.1Sn-0.5Mg-xMn (x = 0, 0.1, 0.2, 0.3) Alloys Used as the Anode of an Al-Air Battery

Tailoring the discharge performance of extruded Mg-Sm-Al anode for Mg-air battery applications via control of Al content

High Anodic-Efficiency and Energy-Density Magnesium-Air Battery with Modified AZ31 Anode

Tailoring the electrochemical behavior and discharge performance of Mg–Al–Ca–Mn anodes for Mg-air batteries by different extrusion ratios

Micro-alloyed Mg–Al–Sn anode with refined dendrites used for Mg-air battery

Electrochemical properties and discharge performance of Mg-3Sn-xCa alloy as a novel anode for Mg-air battery

Electrochemical corrosion behavior of Mg-Al-Sn alloys with different morphologies of β-Mg 17 Al 12 phase as the anodes for Mg-air batteries

Discharge performance of Al-0.1Sn-0.1In-0.05Ga alloy for Al–air battery anodes

Enhancing the Electrochemical Performance of Al-Mg-Sn-Ga Alloy Anode for Al-Air Battery by Solution Treatment

A micro-alloyed Mg-Zn-Ge alloy as promising anode for primary Mg-air batteries

Superior discharge performance of Mg-air battery: The influence of anodic intermetallic compounds Mg 41 Nd 5 in Mg-4Li-3Nd-0.2Zn alloy

Effect of Gd content on the discharge and electrochemical behaviors of the magnesium alloy AZ31 as an anode for Mg-air battery

Corrosion and discharge performance of a magnesium aluminum eutectic alloy as anode for magnesium–air batteries

Discharge Properties and Electrochemical Behaviors of Mg-Zn-xSr Magnesium Anodes for Mg–Air Batteries

Effects of Zn/Ca alloying on the Second Phase, Corrosion Behavior and Mg‐air Battery Anodic Performance of Mg‐1Sn‐based Alloys

Micro-Alloyed Mg-Al-Mn-La Anode for Mg-Air Batteries

Discharge performance of the Al–Mg–Sn alloy anodes with different Sn content for Al-air batteries