Abstract:The aim of CO2 enhanced gas recovery (CO2-EGR) is to extract more natural gas from depleted gas reservoirs and simultaneously sequestrate large amount of CO2. To achieve these dual objectives, the optimization of CO2 injection strategy in CO2-EGR is proposed to achieve maximum benefit. Thus, the focus of this work is to study CO2-EGR by numerical simulation and optimization. For this purpose, a 3D reservoir model with 'five-spot' well pattern (an injection well and four production wells) is established for simulations using the multiphase simulator TOUGH2, and the main focus is on optimization of CO2 injection rate and well placements by coupling the genetic algorithm (GA) with TOUGH2. Simulations are performed to determine the optimal injection rate for both two types of injection wells placements, one vertical injection well with number of perforations at various depth and orthogonal horizontal wells on top of the reservoir. The results show that multipoint perforations in the vertical injection well and the horizontal injection wells with appropriate length show improvement in natural gas recovery and CO2 storage compared to the injection location at the reservoir bottom. More importantly, the optimized injection rate determined by GA-TOUGH2 can substantially improve the natural gas recovery factor for both vertical and horizontal well injection. After computing a number of optimized cases, it's shown that the case employing the horizontal injection wells with optimized injection rate of 0.0778 kg/s achieves the maximum recovery of 67.21% and maximum CO2 storage efficiency of 69.54%, equal to 23.88 × 106 kg of natural gas exploited from the depleted reservoir and 74.52 × 106 kg of CO2 stored in pore volume of 1.81 × 106 m3 of the reservoir. This case also has minimum injection pressure jump of 0.08 MPa thereby reducing the risk of formation fracture and CO2 leakage. However, by conducting a simple cost/benefit analysis, it is determined that this optimally performing case is not the best economically because of higher drilling cost of horizontal well compared to a vertical well. It is found that a vertical well with two suitably placed perforations with optimized injection rate of 0.1025 kg/s is economically superior since the previously used production wells can be reused for CO2 injection, which can therefore reduce both the equipment and the drilling costs. It is hoped that the findings of this work should provide some insights into the optimization of CO2-EGR with maximum economic benefit for implementation in industrial practice.

Optimization Of Injection Location Based On Simulations Of Co2 Leakage Through Multiple Leakage Pathways

Prediction on Leakage and Rate Characteristics of CO2 Storage

Modeling of possible CO2 leakage with phase transition in wellbore-reservoir system based on the Ordos CCS project, China

Optimization Study of Injection-Production Parameters for CO2 Enhanced Oil Recovery and Storage in Low Permeability Oil Reservoirs

Optimization of Enhanced Coalbed Methane Recovery with C02 Injection

A Modelling Study of the Multiphase Leakage Flow from Pressurised CO2 Pipeline.

A study of CO2 injection well selection in the naturally fractured undulating formation in the Jurong Oilfield, China

A Leakage Safety Discrimination Model and Method for Saline Aquifer CCS Based on Pressure Dynamics

Optimization of Carbon Sequestration and Carbon Displacement in Fractured Horizontal Wells in Low Permeability Reservoirs

Injection-production optimization of carbonate reservoir based on an inter-well connectivity model

An optimization approach to design monitoring schemes for CO2 leakage detection

Optimization of CO2 EOR and geological sequestration in high-water cut oil reservoirs

Numerical simulation and optimization of injection rates and wells placement for carbon dioxide enhanced gas recovery using a genetic algorithm

Uncertainty Quantification of CO 2 Leakage Through a Fault with Multiphase and Nonisothermal Effects

Injection-production optimization of fault-karst reservoir—considering high-speed non-Darcy effect

Improving monitoring network design to detect leaks at hazardous facilities: Lessons from a CO2 storage site

Safety-based Injection Strategy for Carbon Dioxide Geological Sequestration in a Deep Saline Aquifer with Complex Sandstone-shale Sequences: A Case Study from Taiwan

Uncertainty Analyses of Co2 Plume Expansion Subsequent to Wellbore Co2 Leakage into Aquifers

Simulation of Migration and Phase Transition of Sealed CO2 in a Leaky Pathway

Leakage risk assessment of a CO2 storage site: A review

Graph Network Surrogate Model for Optimizing the Placement of Horizontal Injection Wells for CO2 Storage