Abstract:Detecting and quantifying subsurface leaks remains a challenge due to the complex nature and extent of belowground leak scenarios. To address these scenarios, monitoring and evaluating changes in gas leakage behavior over space and time are crucial for ensuring safe and efficient responses to known or potential gas leaks. This study demonstrates the capability of linking environmental and gas concentration data obtained using a low-cost, near real-time methane (CH4) detector network and an inverse gas migration model to capture and quantify non-steady state belowground natural gas (NG) leaks. The Estimating Surface Concentration Above Pipeline Emission (ESCAPE) model was modified to incorporate the impact of soil properties on gas migration. Field-scale controlled NG experiments with leakage rates ranging from 37 to 121 g/h indicate that elevated belowground near-surface (BNS) gas concentrations persist long before elevated surface concentrations are observed. On average, BNS CH4 concentrations were 20%-486% higher than surface CH4 concentrations within the monitoring radius of 4 m from the leak location. An increase in the BNS CH4 concentration was observed within 3 h as the leak rate increased from 37 to 89 g/h. However, due to the atmospheric fluctuations, any changes in surface CH4 concentrations could not be confirmed within this period. The plume area of the BNS CH4 extended approximately two times farther than that of the surface CH4 as the gas leak rate increased from 37 to 121 g/h. The estimated NG leak rates by the modified ESCAPE model agreed well with the experimental NG leak rates (m = 0.99 and R2 = 0.77), demonstrating that including soil characteristics and BNS CH4 measurements can advance estimations of non-steady NG leak rates in low and moderate NG leak rate scenarios. The CH4 detector network and model show potential as an innovative tool to improve operators' risk assessment and NG leakage response.

An optimization approach to design monitoring schemes for CO2 leakage detection

Improving monitoring network design to detect leaks at hazardous facilities: Lessons from a CO2 storage site

Simple and effective atmospheric monitoring for CO2 leakage

Looking for leakage or monitoring for public assurance?

Evaluating geophysical monitoring strategies for a CO2 storage project

Subspace-Constrained Continuous Methane Leak Monitoring and Optimal Sensor Placement

A Data-Driven CO2 Leakage Detection Using Seismic Data and Spatial-Temporal Densely Connected Convolutional Neural Networks

BEACON: Bayesian Experimental design Acceleration with Conditional Normalizing flows $-$ a case study in optimal monitor well placement for CO$_2$ sequestration

Detecting leakage of brine or CO2 through abandoned wells in a geological sequestration operation using pressure monitoring wells

A Leakage Safety Discrimination Model and Method for Saline Aquifer CCS Based on Pressure Dynamics

Dynamic risk assessment for geologic CO2 sequestration

Optimizing Carbon Storage Operations for Long-Term Safety

Remote sensing of CO2 leakage from geologic sequestration projects

Monitoring Approaches for Detecting and Evaluating CO2 and Formation Water Leakages into Near-surface Aquifers

The Leakage Risk Monetization Model for Geologic CO2 Storage.

Monetizing Leakage Risk with Secondary Trapping in Intervening Stratigraphic Layers

Risk-based optimization of emergency response systems for accidental gas leakage in utility tunnels

Optimization of sensor deployment sequences for hazardous gas leakage monitoring and source term estimation

Economically Optimal Leak Management: Balancing Pressure Reduction, Energy Recovery, and Leak Detection and Repair

Optimizing continuous monitoring sensor placement on oil and gas sites

Quantifying non-steady state natural gas leakage from the pipelines using an innovative sensor network and model for subsurface emissions - InSENSE