Abstract:The aim of CO2 enhanced gas recovery (CO2-EGR) is to extract more natural gas from depleted gas reservoirs and simultaneously sequestrate large amount of CO2. To achieve these dual objectives, the optimization of CO2 injection strategy in CO2-EGR is proposed to achieve maximum benefit. Thus, the focus of this work is to study CO2-EGR by numerical simulation and optimization. For this purpose, a 3D reservoir model with 'five-spot' well pattern (an injection well and four production wells) is established for simulations using the multiphase simulator TOUGH2, and the main focus is on optimization of CO2 injection rate and well placements by coupling the genetic algorithm (GA) with TOUGH2. Simulations are performed to determine the optimal injection rate for both two types of injection wells placements, one vertical injection well with number of perforations at various depth and orthogonal horizontal wells on top of the reservoir. The results show that multipoint perforations in the vertical injection well and the horizontal injection wells with appropriate length show improvement in natural gas recovery and CO2 storage compared to the injection location at the reservoir bottom. More importantly, the optimized injection rate determined by GA-TOUGH2 can substantially improve the natural gas recovery factor for both vertical and horizontal well injection. After computing a number of optimized cases, it's shown that the case employing the horizontal injection wells with optimized injection rate of 0.0778 kg/s achieves the maximum recovery of 67.21% and maximum CO2 storage efficiency of 69.54%, equal to 23.88 × 106 kg of natural gas exploited from the depleted reservoir and 74.52 × 106 kg of CO2 stored in pore volume of 1.81 × 106 m3 of the reservoir. This case also has minimum injection pressure jump of 0.08 MPa thereby reducing the risk of formation fracture and CO2 leakage. However, by conducting a simple cost/benefit analysis, it is determined that this optimally performing case is not the best economically because of higher drilling cost of horizontal well compared to a vertical well. It is found that a vertical well with two suitably placed perforations with optimized injection rate of 0.1025 kg/s is economically superior since the previously used production wells can be reused for CO2 injection, which can therefore reduce both the equipment and the drilling costs. It is hoped that the findings of this work should provide some insights into the optimization of CO2-EGR with maximum economic benefit for implementation in industrial practice.

A study of CO2 injection well selection in the naturally fractured undulating formation in the Jurong Oilfield, China

Petrological Characterization and Reactive Transport Simulation of a High-Water-cut Oil Reservoir in the Southern Songliao Basin, Eastern China for CO2 Sequestration

Numerical Modelling of CO2 Injection and Storage in Low Porosity and Low Permeability Saline Aquifers: A Design for the Permian Shiqianfeng Formation in the Yulin Area, Ordos Basin

Optimization of Carbon Sequestration and Carbon Displacement in Fractured Horizontal Wells in Low Permeability Reservoirs

Assessment of CO 2 storage potential in high water-cut fractured volcanic gas reservoirs—Case study of China's SN gas field

Evaluation of the Potential for CO2 Storage and Saline Water Displacement in Huaiyin Sag, Subei Basin, East China

Numerical Simulation Study on Optimal CO2 Injection Well Placement for Sequestration in Old Gob: A Case Study of the Huainan Mining Area

Numerical study on the geomechanical responses in the Jilin Oilfield CO 2 -EOR and CGS projects in China

Field-based simulation of a demonstration site for carbon dioxide sequestration in low-permeability saline aquifers in the Ordos Basin, China

Optimization Study of Injection-Production Parameters for CO2 Enhanced Oil Recovery and Storage in Low Permeability Oil Reservoirs

Numerical simulation and optimization of injection rates and wells placement for carbon dioxide enhanced gas recovery using a genetic algorithm

Numerical simulation and laboratory experiments of CO2 sequestration and being as cushion gas in underground natural gas storage reservoirs

Numerical simulation of the feasibility of supercritical CO2 storage and enhanced shale gas recovery considering complex fracture networks

Modeling of possible CO2 leakage with phase transition in wellbore-reservoir system based on the Ordos CCS project, China

Numerical investigation of the influence of vertical permeability heterogeneity in stratified formation and of injection/production well perforation placement on CO2 geological storage with enhanced CH4 recovery

Preliminary Estimation of Carbon Dioxide Storage Capacity in the Oil Reservoirs in Subei Basin

Feasibility Study of Gas Injection in Low-Permeability Reservoirs of Changqing Oilfield

Carbon Capture and Storage for Long-Term and Safe Sealing with Constrained Natural CO2 Analogs

Preliminary Environmental Risk Assessment Study Using US DOE’s National Risk Assessment Partnership on Leakage through Legacy Wells at the Shenhua CCS Demonstration Project

A modeling and numerical simulation study of enhanced CO2 sequestration into deep saline formation: a strategy towards climate change mitigation

Potential Capacity and Feasibility of CO2 Sequestration in Petroleum Reservoirs of Basaltic Rocks: Example from Basaltic Hydrocarbon Reservoir in the Xujiaweizi Fault Depression the Songliao Basin, East China