Abstract:In the present study, porous TiO2 foams (PTF) were prepared by particle-stabilized emulsion method. The samples having solid contents ranging from 20 wt.% to 35 wt.% were prepared and successfully impregnated with paraffin without using a surfactant. SEM images showed that the prepared PTFs had three-dimensional interpenetrating structures with good porosities. The pore structure and morphology of PTF was markedly influenced by the solid content. With increase in solid content, porosity decreased, along with a decrease in the homologous encapsulation ratio of paraffin. Differential scanning calorimetry (DSC) evaluated the thermal properties of the paraffin/PTF (PTFP) composites. DSC results showed that with a solid content of 20 wt.%, the paraffin adsorption reached 62 vol.% and latent heat of the composite PCM was 94.05 Jig after 200 melting/freezing cycles. TGA results showed that the form-stable composite PCMs had good thermal stabilities. In order to further enhance the thermal conductivity and improve the adsorption capacity of PTF, sucrose was added to the emulsion and carbonized in situ to form carbon/PTF (PTFC). This could also be successfully impregnated with paraffin to obtain the form-stable composite paraffin/PTFC (PTFCP). The TEM images and results of XPS analysis confirmed that the surfaces of TiO2 particles were covered with a 2 nm thick carbon film (C/TiO2). The thermal conductivity of PTFCP increased from 0.302 W/m K to 1.059 W/m K compared to PTFP, along with a further improvement in adsorption capacity. Furthermore, the results of FT-IR analysis and thermal cyclic tests showed that the form-stable composite PCMs had good chemical stability and thermal reliability after 200 melting/freezing cycles. Therefore, the prepared form-stable composite PCMs having excellent pore structures, thermal properties, thermal reliabilities, and chemical stabilities are promising PCM candidates for heat energy storage applications. (C) 2016 Elsevier Ltd. All rights reserved.

Preparation of Paraffin/porous TiO2 Foams with Enhanced Thermal Conductivity As PCM, by Covering the TiO2 Surface with a Carbon Layer

Porous Titanium Dioxide Foams: A Promising Carrier Material for Medium- and High-Temperature Thermal Energy Storage

Preparation and thermal characterization of paraffin/metal foam composite phase change material

A Novel Flexible Carbon Fiber with Carbon Nanotubes Growing In-site to Impregnate Paraffin for Thermal Energy Application

Preparation and Characterization of Form-Stable Tetradecanol–palmitic Acid Expanded Perlite Composites Containing Carbon Fiber for Thermal Energy Storage

Preparation of Paraffin/expanded Vermiculite with Enhanced Thermal Conductivity by Implanting Network Carbon in Vermiculite Layers

A novel flexible carbon fiber with carbon nanotubes growing in-situ via chemical vapor deposition to impregnate paraffin for thermal energy application

Effective Thermal Conductivity of Open-Cell Metal Foams Impregnated with Pure Paraffin for Latent Heat Storage

Synthesis and Characterization of Microencapsulated Paraffin with Titanium Dioxide Shell As Shape-Stabilized Thermal Energy Storage Materials in Buildings

Graphitization Modified Three-Dimensional Fully Interconnected High Porous TiO2 Ceramics: A Promising Carrier Material for Thermal Storage and Thermal Conductivity Enhancement

Self-assembly fabrication of GO/TiO2@paraffin microcapsules for enhancement of thermal energy storage

Paraffin wax with an addition of nano Ti2O3: Improve thermal and photothermal performances with little decreased latent heat

Enhancement of Thermal Conductivity by the Introduction of Carbon Nanotubes As a Filler in Paraffin/expanded Perlite Form-Stable Phase-Change Materials

Design and Preparation of the Phase Change Materials Paraffin/Porous Al2o3@Graphite Foams with Enhanced Heat Storage Capacity and Thermal Conductivity

Experimental and numerical investigations of enhanced thermal energy storage performance for foam/paraffin composite under different heating conditions

Shape stabilization, thermal energy storage behavior and thermal conductivity enhancement of flexible paraffin/MWCNTs/PP hollow fiber membrane composite phase change materials

Consistent preparation, chemical stability and thermal properties of a shape-stabilized porous carbon/paraffin phase change materials

Form-stable and tough paraffin-Al2O3/high density polyethylene composites as environment-friendly thermal energy storage materials: preparation, characterization and analysis

Development of Novel Polypropylene Syntactic Foams Containing Paraffin Microcapsules for Thermal Energy Storage Applications

A cost-effective form-stable PCM composite with modified paraffin and expanded perlite for thermal energy storage in concrete

Preparation and Thermal Characterization of Hollow Graphite Fibers/Paraffin Composite Phase Change Material