Abstract:To make a better application of phase change material (PCM) in the thermal management of aerospace systems, this paper investigates effects of the variation of foam-metal pore structure on the thermal performance of composite PCM (CPCM) subjected to different force fields. A two-dimensional numerical model based on the enthalpy-porosity method and the two-temperature energy equation is developed and verified with the experimental data. The thermal behavior of CPCM with different porosities (ω = 20 PPI, ε = 0.91, 0.93, 0.95 and 0.97) and different pore densities (ε = 0.95, ω = 10, 20, 40 and 80 PPI) are investigated under centrifugal acceleration conditions of 0, 5 and -5 g, respectively. A novel index of "end-state isobars" is introduced to describe the melting process of CPCM. The results show that the isotherms of CPCM liquid phase evolve gradually towards the interface parallel to end-state isobars in all conditions. At 0 g, decreasing the porosity effectively improves the thermal conduction of CPCM and slows down the approaching of the isotherms to the end-state isobars. Similarly, increasing the pore density significantly weakens the natural convection of liquid PCM and can also slows down the approaching isotherms to the end-state isobars. At 5 g, the isotherms can match exactly with the end-state isobars, after which the heat transfer process mainly depends on conductive. And decreasing the porosity can significantly improve the thermal performance of CPCM, while adjusting the pore density has almost no effect. At -5 g, the natural convection strength of CPCM is enhanced, changing porosity has limited effect on the heat transfer performance of CPCM, while decreasing pore density can significantly enhance the heat transfer performance. The results may provide some valuable reference for the evaluation and design of latent heat thermal energy storage (LHTES) system suitable to the aerospace field.

Effective Thermal Conductivity of Open-Cell Metal Foams Impregnated with Pure Paraffin for Latent Heat Storage

Thermal Conductivity of Aerated Concrete (AC) Composites Containing Micro-Encapsulated Phase Change Materials

Experimental Investigation of the Comprehensive Heat Transfer Performance of PCMs Filled with CMF in a Heat Storage Device

Transient Performance of a Thermal Energy Storage-Based Heat Sink Using a Liquid Metal As the Phase Change Material

Thermal conductivity enhancement of phase change materials for thermal energy storage: A review

Numerical simulation on thermal behavior of partially filled metal foam composite phase change materials

Numerical thermal performance assessment of phase change process in a PCM/foam-fins enclosure under various thermal conditions

How can copper foam better promote the melting process of phase change materials

Preparation and thermal properties of palmitic acid/copper foam phase change materials

Performance Evaluation and Analysis of a Vertical Heat Pipe Latent Thermal Energy Storage System with Fins-Copper Foam Combination

Experimental and numerical investigations of enhanced thermal energy storage performance for foam/paraffin composite under different heating conditions

Numerical study on the thermal performance of foam-metal composite phase change material in different force fields

Numerical investigation on thermal behaviors of two-dimensional latent thermal energy storage with PCM and aluminum foam

Heat transfer enhancement of nano-encapsulated phase change material (NEPCM) using metal foam for thermal energy storage

Effect of enhancement in metal foam pore density on heat transfer of phase-change materials

Fabrication and Thermal Performance of 3D Copper-Mesh-Sintered Foam/Paraffin Phase Change Materials for Solar Thermal Energy Storage

Thermal Properties and Thermal Conductivity Enhancement of Composite Phase Change Materials Using Myristyl Alcohol/Metal Foam for Solar Thermal Storage

Numerical investigation on thermal performance of phase change materials embedded in functionally graded metal foam

Solution combustion synthesized copper foams for enhancing the thermal transfer properties of phase change material

Experimental and numerical assessments of thermal transport in phase change material embedding additively manufactured triply periodic minimal surfaces: A comparative evaluation

Pore-scale investigation on the heat-storage characteristics of phase change material in graded copper foam