Abstract:The increasing risk of fire poses a significant threat to the safety of structural concrete. While the mechanical properties of concrete after exposure to elevated temperatures are well-documented, its properties during exposure remain insufficiently understood, posing challenges for effective fire-resistant design of concrete structures. This study aims to address this knowledge gap by investigating the mechanical properties of hybrid fiber and nano-silica (NS)-reinforced concrete (HFNRC) during elevated temperature exposure. Using a novel multi-functional testing apparatus designed for simultaneous heating and mechanical testing, the effects of varying steel fiber volume ratio (SFs, 0-1.5% by volume) and NS dosages (0-1.5% by weight) were examined at temperatures of 200°C (473.15K), 400°C (673.15K), 600°C (873.15K), and 800°C (1073.15K). The experimental results indicate that compressive and flexural strengths initially decreased, then increased, and subsequently decreased again as temperatures rose from 200°C to 800°C, while splitting tensile strength consistently declined. At 800°C, the compressive, splitting tensile and flexural strengths decreased by 63%, 82% and 76%, respectively. Notably, the addition of 1.5% by volume SFs increased the splitting tensile strength by up to 119% at 400°C, providing the greatest improvement among all tested properties. Empirical equations were established to predict the compressive, splitting tensile, and flexural strengths of HFNRC during elevated temperatures. Microstructural analyses using scanning electron microscopy (SEM) and X-ray diffraction (XRD) demonstrated that NS enhances the compactness of HFNRC’s matrix and promotes the formation of calcium silicate hydrate (C-S-H) gel, contributing to improved performance under fire exposure. These findings are relevant to international research focused on enhancing the fire resistance of structural materials and improving the safety of concrete structures globally.

Thermal behavior of siliceous and ferro-siliceous sacrificial concrete subjected to elevated temperatures

Mechanical Properties and Damage Evolution of Siliceous Concrete Subjected to Elevated Temperatures

Damage and mechanism analysis of sacrificial concrete under high temperature

Mechanical and Physicochemical Properties of Ferro-Siliceous Concrete Subjected to Elevated Temperatures

Thermo-mechanical and Thermophysical Properties of Ferro-siliceous Sacrificial Concrete on Exposure to Elevated Temperatures

Mechanical Properties and Microstructures of Steel-basalt Hybrid Fibers Reinforced Cement-based Composites Exposed to High Temperatures

Damage Evolution of Sacrificial Concrete Subjected to Elevated Temperatures

Transient strain of self-compacting concrete loaded in compression heated to 700 °C

Simulation of the Cracking and Ablation Behavior of Ferro-Siliceous and Siliceous Nuclear Sacrificial Concretes

Effects of High Temperature and Substitution Rates of Fly Ash on the Mechanical Properties and Microstructures of Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites

Experimental study of factors affecting the spalling of self-compacting concrete under high temperatures

Thermal Stressstrain of Self-Compacting Concrete in Compression

Correlation Between Macroscopic Properties and Microscopic Pore Structure in Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites Subjected to Elevated Temperatures

An Experimental Study on the Performance of Self-Compacting Lightweight Concrete Exposed to Elevated Temperature

Study on Micro-mesoscale Characterization and Impact Load Mechanical Properties of Ultra-High-Performance Concrete After Sustained Elevated Temperature

Thermal and Mechanical Properties of Ultrahigh Toughness Cementitious Composite with Hybrid PVA and Steel Fibers at Elevated Temperatures

Mechanical Properties of Hybrid Fibers and Nano Silica Reinforced Concrete During Exposure to Elevated Temperatures

Performance of steel fibers reinforced self compacting concrete subjected to high temperature

Influence of Concrete Properties on Molten Core-Concrete Interaction: A Simulation Study

Thermal Resistance, Water Absorption and Microstructure of High-Strength Self-Compacting Lightweight Aggregate Concrete (HSSC-LWAC) after Exposure to Elevated Temperatures

Feasibility of Producing Cement-Based Sacrificial Materials with Strontium Ferrite: A Preliminary Study