Abstract:Activated carbon (AC) is a useful and environmentally sustainable catalyst for oxygen reduction in air-cathode microbial fuel cells (MFCs), but there is great interest in improving its performance and longevity. To enhance the performance of AC cathodes, carbon black (CB) was added into AC at CB:AC ratios of 0, 2, 5, 10, and 15 wt % to increase electrical conductivity and facilitate electron transfer. AC cathodes were then evaluated in both MFCs and electrochemical cells and compared to reactors with cathodes made with Pt. Maximum power densities of MFCs were increased by 9-16% with CB compared to the plain AC in the first week. The optimal CB:AC ratio was 10% based on both MFC polarization tests and three electrode electrochemical tests. The maximum power density of the 10% CB cathode was initially 1560 ± 40 mW/m(2) and decreased by only 7% after 5 months of operation compared to a 61% decrease for the control (Pt catalyst, 570 ± 30 mW/m(2) after 5 months). The catalytic activities of Pt and AC (plain or with 10% CB) were further examined in rotating disk electrode (RDE) tests that minimized mass transfer limitations. The RDE tests showed that the limiting current of the AC with 10% CB was improved by up to 21% primarily due to a decrease in charge transfer resistance (25%). These results show that blending CB in AC is a simple and effective strategy to enhance AC cathode performance in MFCs and that further improvement in performance could be obtained by reducing mass transfer limitations.

The excellent performance and mechanism of activated carbon air cathode doped with different type of cobalt for microbial fuel cells

Cobalt‑nitrogen‑carbon Nanotube Co-Implanted Activated Carbon As Efficient Cathodic Oxygen Reduction Catalyst in Microbial Fuel Cells

Nitrogenous mesoporous carbon coated with Co/Cu nanoparticles modified activated carbon as air cathode catalyst for microbial fuel cell

Improving power output in microbial fuel cells with free-standing CoC x /Co@CC composite anodes

Long‐Term Performance of Chemically and Physically Modified Activated Carbons in Air Cathodes of Microbial Fuel Cells

Enhanced Activated Carbon Cathode Performance for Microbial Fuel Cell by Blending Carbon Black

Immobilization of a Metal-Nitrogen-Carbon Catalyst on Activated Carbon with Enhanced Cathode Performance in Microbial Fuel Cells.

Simultaneously Enhancing Power Density and Coulombic Efficiency with a Hydrophobic Fe–N4/activated Carbon Air Cathode for Microbial Fuel Cells

High‐Performance Carbon Anode Derived from Sugarcane for Packed Microbial Fuel Cells

Use of Pyrolyzed Iron Ethylenediaminetetraacetic Acid Modified Activated Carbon As Air-Cathode Catalyst in Microbial Fuel Cells.

High power density output and durability of microbial fuel cell enabled by dispersed cobalt nanoparticles on nitrogen-doped carbon as cathode electrocatalyst

Power Generation Using an Activated Carbon and Metal Mesh Cathode in A Microbial Fuel Cell

Highly Efficient Improvement of Power Generation and Waste Removal in Microbial Fuel Cell by Associating Activated Carbon with a Novel Porous Iron-Nitrogen-doped Carbon Nanosphere

Carbon Material Optimized Biocathode for Improving Microbial Fuel Cell Performance

Activated carbon supported Fe-Cu -NC as efficient cathode catalyst for the microbial fuel cell

Long-term performance of activated carbon air cathodes with different diffusion layer porosities in microbial fuel cells

High-Power Microbial Fuel Cells Based on a Carbon-Carbon Composite Air Cathode.

Iron cobalt-doped carbon nanofibers anode to simultaneously boost bioelectrocatalysis and direct electron transfer in microbial fuel cells: Characterization, performance, and mechanism

Improvement of oxygen reduction capacity by activated carbon doped with broccoli-like Co-Ni2P in microbial fuel cells

High-Performance Carbon Aerogel Air Cathodes for Microbial Fuel Cells.

High-Capacitance Manganese Dioxide Oxide/Carbon Nanotube/Carbon Felt as a Bioanode for Enhanced Energy Output in Microbial Fuel Cells