Abstract:Abstract In this paper, a new benzotriazole phosphite ammonium salt derivative extreme pressure additive called PN was synthesized. Four-ball experiments and SRV experiments were used to test the high temperature and extreme pressure performance of PN additive, and comparisons were made with the commonly used additives including ZDDP and T304. The results show that the COF and wear amount of the PN additive in the four-ball experiment were much smaller than that of the ZDDP and T304 additives. The COF of the PN additive in the RSV experiment changed slightly with temperature, and it had better high temperature extreme pressure performance in friction reduction than the traditional ZDDP and T304 additives. When the temperature was 120oC, the COF of PN was about 30% lower than that of traditional additives. Thermogravimetric analysis showed that the failure temperature of PN additives was within 180-200oC, and the thermal stability was better than that of ZDDP and T304. After the four-ball test, SEM was used to observe the morphology of wear spots on the ball surface. It was found that the wear spots containing PN additive had slight adhesive wear, while those containing ZDDP and T304 showed serious adhesion and ploughing wear, and the surface appeared peeling and tearing. XPS was used to detect the chemical composition of friction surface containing PN additive, and thus the formation process of film on frictional surface was analyzed.

Effect of a New Phosphate Compound (BAFDP) Addition on the Lubricating Performance of Engine Oils at Elevated Temperatures

Tribological characteristics of bisphenol AF bis(diphenyl phosphate) as an antiwear additive in polyalkylene glycol and polyurea grease for significantly improved lubrication

Synthesis of a Novel Borate Ester Containing a Phenylboronic Group and Its Tribological Properties As an Additive in PAO 6 Base Oil

Tribological Study of A Novel Borate Ester Containing Dialkylthiophosphate Group As Multifunctional Additive

Tribological Performance and Wear Mechanism of Compound Containing S, P, and B as EP/AW Additives in Copper Foil Oil

Investigation on Phenyl-Borated Hydroxyalkyldithiocarbamate As Multi-Functional Lubricating Additive with High Hydrolytic Stability and Anti-Oxidation

Tribological characteristics of bisphenol S bis(diphenyl phosphate) as a high-performance antiwear additive in lubricating greases at elevated temperature

Tribological Study of Oil-Miscible Quaternary Ammonium Phosphites Ionic Liquids as Lubricant Additives in PAO

The Tribological Performance of a Long Chain Alkyl Phenylboric Ammonium Derivative and Its Interaction with ZDDP

Synthesis and Tribological Properties of a Cyclic Phosphate Ester as Elevated Temperature Lubricanting Additive

A New Benzotriazole Phosphite Ammonium Salt Derivative (PN) Extreme Pressure Additive to Improve Gear Oil Tribological Properties

Tribological Behavior of N-containing Boric Acid Derivatives and Their Synergetic Effects with ZDDP

Tribological Behaviour of Two Ash-Less and Phosphorous-Free Anti-Wear Additives and Their Synergetic Effect with Zinc Dialkyldithiophosphates in Mineral Oil

Tribological And Antioxidation Properties Study Of Two N-Containing Borate Ester Derivatives As Additive In Rapeseed Oil

Effects of Phosphorus-Free Antioxidants on Oxidation Stability and High-Temperature Tribological Properties of Lubricants

Tribological Study of A Novel Borate Ester Containing S, P with High Hydrolytic Stability As A Multifunctional Lubricating Additive

Tribological study of hydrolytically stable S-containing alkyl phenylboric esters as lubricant additives

A Tribological Study of an S,P‐containing Benzotriazole Derivative As an Additive in Pentaerythritol Ester

Synergistic effect between organic borate esters and phosphorus-based additives on tribological performances as lubricant additives in mineral oil

The Tribological Chemistry of a Novel Borate Ester Additive and Its Interaction with ZDDP Using XANES and XPS

Functionalized phosphate ionic liquids as additives in PEG with excellent tribological properties for boundary/mixed/elastohydrodynamic lubrication