Abstract:Antiwear properties of metal and sulfur-free synergistic formulations containing quinoline derivatives (QDs)—4-N-(7-chloroquinolin-4-yl)-1-N,1-N-diethylpentane-1,4-diamine (QD-1), 4-N-(6-methoxyquinolin-8-yl)pentane-1,4-diamine (QD-2) and 1-N,1-N-diethyl-4-N-(6-methoxy quinolin-8-yl)pentane-1,4-diamine (QD-3)—with triphenyl phosphate (PE) in polyethylene glycol (PEG) at a very low concentration, 0.25% w/v of each, have been studied on a four-ball tester using ASTM D4172 and D5183 standards. Phosphorus content in the formulations was significantly reduced compared to the frequently used antiwear additive zinc dialkyldithiophosphate (ZDDP) and it was much lower than the allowed concentration suggested by various norms. The synergistic admixtures, SQD-2 and SQD-3, significantly improved the antiwear properties of base lube compared to the ZDDP/PE/QDs alone but the behavior of SQD-1 is comparable to that of ZDDP. Minimum values of mean wear scar diameter and average coefficient of friction were found to be 0.458 mm and 0.034, respectively, for SQD-3, the admixture with the maximum antiwear efficiency. However, these values were 0.538 mm and 0.083, respectively, for ZDDP, and for base oil the values were 1.185 mm and 0.126, respectively. The load-carrying capacity was found to be much higher for the synergistic formulations than for ZDDP. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) micrographs of the wear track support the tribological behavior of the above additives. The presence of nitrogen, oxygen, and phosphorus in energy-dispersive X-ray (EDX) spectra of the worn surface lubricated with SQDs indicates the adsorption of additive on the surface. The magnificent tribological behavior of SQDs may be attributed to the tribochemical film formed on the steel surface invoking phosphorus–nitrogen synergy. Quantum chemical calculations (density functional theory) for interactions of QDs with a steel surface agree well with the experimental observations.

Tribological Behaviour of Two Ash-Less and Phosphorous-Free Anti-Wear Additives and Their Synergetic Effect with Zinc Dialkyldithiophosphates in Mineral Oil

Synergistic Tribological Performances Of Borate Additive In Lubricants

Study on Tribological Properties of Organic Bismuth Compounds As Lubricationg Additive

Tribological Properties of Sulfur- and Phosphorus-Free Organic Molybdenum Compound As Additive in Oil

The Synergistic Antiwear and Frictional Properties of Organic Molybdenum Compound with Zinc Dialkyldithiophosphate

Anti-wear synergism between organomolybdenum compounds and a ZnDDP

Tribological Performances and Mechanism of Bismuth Dialkyl-Dithiocarbamate Additive

Tribological mechanisms of the synergistic effect between sulfur- and phosphorus-free organic molybdenum and ZDDP

Tribological Performance and Wear Mechanism of Compound Containing S, P, and B as EP/AW Additives in Copper Foil Oil

A Study on the Tribological Performance of an Organic Cadmium Compound as a Lubricant Additive

Tribological behavior of sulfonitrided tribofilm generated from non-corrosive dimercaptobenzothiadiazole-based additives as effective boundary lubrication layer

Study on Tribological Properties of Cadmium Dialkyl-Dithiophosphyl-ldithiophosphate Additive

Tribological Studies of Some Quinoline Derivatives and Their Synergistic Interaction with Phosphate Ester

SYNERGISTIC ANTIWEAR EFFECTS OF ORGANIC BORATE ESTER CONTAINING NITROGEN AS LUBRICATING OIL ADDITIVE

Study on Synergistic Load Carrying and Antiwear Properties of Organic Bismuth Compounds

Antiwear synergism between organomolybdenum compounds and a ZnDDP

Tribological Performance And Action Mechanism Of Cadmium Dialkyldithiophosphate

A study of S-(1H-benzotriazol-1-yl)methyl N,N-dialkyldithiocarbamates as novel multifunctional oil additives

Synergistic effects between sulfur- and phosphorus-free organic molybdenums and ZDDP as lubricating additives in PAO 6

Synergism between bio-based oleate ester and low-concentration ZDDP under reciprocating contacts

Anti‐wear Performance of Organomolybdenum Compounds As Lubricant Additives