Abstract:Crystal growth of barium titanate (BaTiO3) using a wet chemical reaction was investigated at various temperatures. BaTiO3 nanoparticles were obtained at an energy-efficient temperature of 80 °C. However, BaTiO3 nanocubes with a preferred size and shape could be synthesized using a solvothermal method at 200 °C via a reaction involving titanium tetraisopropoxide [(CH3)2CHO]4Ti for nucleation and fine titanium oxide (TiO2) nanoparticles for crystal growth. The BaTiO3 nanocubes showed a high degree of dispersion without the use of dispersants or surfactants. The morphology of BaTiO3 was found to depend on the reaction medium. The size of the BaTiO3 particles obtained using water as the reaction medium was the largest among the particles synthesized using various reaction media. In the case of alcohol reaction media, the BaTiO3 particle size increased in the order methanol, ethanol, 1-propanol, 1-butanol, and 1-pentanol. Furthermore, BaTiO3 powder obtained using alcohol reaction media resulted in cubic shapes as opposed to the round shapes obtained when water was used as the medium. We found that the optimal condition for the synthesis of BaTiO3 nanocubes involved the use of 1-butanol as the reaction medium, resulting in an average particle size of 52 nm, which is the average distance of the cubes measured diagonally from corner to corner, and gives an average side length of 37 nm, and a tetragonal crystal system as evidenced by the powder X-ray diffraction pattern obtained using high-energy synchrotron X-rays. The origin of the spontaneous polarization of the BaTiO3 tetragonal crystal structure was clarified by a pair distribution function analysis. In addition, surface reconstruction of BaTiO3 nanocubes led to an outermost surface comprising two layers of Ti columns.

Exact size control of KTa 0.5 Nb 0.5 O 3 nanoparticles using flexible hydrothermal conditions

Controllable Hydrothermal Synthesis, Optical and Photocatalytic Properties of TiO2 Nanostructures

Orientation-Control Synthesis of KTa<sub>0.25</sub>Nb<sub>0.75</sub>O<sub>3</sub>Nanorods

Synthesis of Single-Crystalline Pb(Zr0.52Ti0.48)O-3 Nanocrystals by Hydrothermal Method

Effect of KOH Concentration on the Phase and Morphology of Hydrothermally Synthesized Pb0.70La0.30TiO3 Fine Powders

Orientation-Control Synthesis Of Kta0.25nb0.75o3 Nanorods

Size-controlled synthesis of BaTiO3 nanocrystals via a hydrothermal route

Hydrothermal Synthesis of Lead Zirconate Titanate Nearly Free-Standing Nanoparticles in the Size Regime of about 4 Nm

Hydrothermal Synthesis and Characterization of Single-Crystal Lead Titanate Nanoflakes

Effect of NaOH Concentration on Formation of Ba4Ti13O30 and BaTi5O11 Nanocrystals Prepared by Hydrothermal Method

Optimization Hydrothermal Synthesis Conditions for Nano-Sized (na0.5 Bi0.495 Nd0.005 )tio3 Particles by an Orthogonal Experiment and Their Luminescence Performance.

Precisely Controlled Heterogeneous Nucleation Sites for Tio2 Crystal Growth

Mesoporous-Structure-Tailored Hydrothermal Synthesis And Mechanism Of The Srtio3 Mesoporous Spheres By Controlling The Silicate Semipermeable Membranes With The Koh Concentrations

Room-Temperature Synthesis of BaTiO<sub>3</sub>Nanoparticles in Large Batches

Poly(vinyl Pyrrolidone)-Assisted Hydrothermal Synthesis of Pb(Zr0.52Ti0.48)O3 Nanocrystals

Hierarchical Titanate Nanostructures Through Hydrothermal Treatment of Commercial Titania Powders

Effect of Key Parameters on the Morphology Transformation of Three-Dimensional TiO2 Solid Microspheres

Enlarging the application of potassium titanate nanowires as titanium source for preparation of TiO 2 nanostructures with tunable phases

Stabilization of Size-Controlled BaTiO3 Nanocubes via Precise Solvothermal Crystal Growth and Their Anomalous Surface Compositional Reconstruction

Hydrothermal Synthesis of Titania Powder with Different Particle Sizes

Supercritical Hydrothermal Synthesis of Titanium Dioxide Nanostructures with Controlled Phase and Morphology