Abstract:The presented paper introduces a design for a phase-locked loop (PLL) that is utilized in frequency synthesis and modulation-demodulation within communication systems and in VLSI applications. The CMOS PLL is designed using 180 nm Fabrication Technology on Cadence Virtuoso Tool with a supply voltage of 1.8 V. The performance is evaluated through simulations and measurements, which demonstrate its ability to track and lock onto the input frequency. The PLL is a frequency synthesizer implemented to generate 2.4 GHz frequency. The input reference clock from a crystal oscillator is 150 MHz square wave. Negative feedback is given by divide-by-16 frequency divider, ensuring the phase and frequency synchronization between the divided signal and the reference signal. The design has essential components such as a phase frequency detector, charge pump, loop filter, current-starved voltage-controlled oscillator (CSVCO), and frequency divider. Through their collaborative operation, the system generates an output frequency that is 16 times the input frequency. The centre frequency of the 3-stage CSVCO is 3.208 GHz at 900 mV input voltage. With an input voltage ranging from 0.4 V to 1.8 V, the VCO offers a tuning range that spans from 1.066 GHz to 3.731 GHz.PLL demonstrates a lock-in range spanning from 70.4 MHz to 173 MHz, with an output frequency range of 1.12 GHz to 2.78 GHz. It achieves a lock time of 260.03 ns and consumes a maximum power of 5.15 mW at 2.4 GHz.

Session T1A: Tutorial: Phase-locked clock generation for SoC: Circuit and system design aspects

Design of monolithic Phase-Locked Loop circuit for high-speed serial data link

Phase-Locked Frequency Generation and Clocking: Architectures and Circuits for Modern Wireless and Wireline Systems

Phase-locked Frequency Synthesis and Modulation for Modern Wireless Transceivers

A Low Phase Noise V-Band 40 Nm Cmos Phase Locked Loop For Wireless Communication

Design Of Low-Jitter 1-Ghz Phase-Locked Loops For Digital Clock Generation

Technology-friendly phase-locked loops

An Overview of Digital-Intensive ΔΣ Phase-Locked Loops Utilizing 1-Bit Conversion and Modulation.

A 3ghz Phase-Locked Loop Design for SerDes Application

Theoretical Modeling and Simulation of Phase-Locked Loop (PLL) for Clock Data Recovery (CDR)

14.1 A 0.048mm2 3mW synthesizable fractional-N PLL with a soft injection-locking technique

Design of Phase Locked Loop in 180 nm Technology

A 2-GHz CMOS phase-locked loop clock generator research and design

Benchmark Figure of Merit Extensions for Low Jitter Phase Locked Loops Inspired by New PLL Architectures

A High Performance Design of a 2 GHz Charge Pump Phase-Locked Loop

A Low Power Sub-GHz PLL with Optimized LO Distribution Circuit

Design and Simulation of a Standing Wave Oscillator Based PLL.

Semidigital PLL Design for Low-Cost Low-Power Clock Generation

A Hybrid Frequency/phase-Locked Loop for Versatile Clock Generation with Wide Reference Frequency Range

15.1 A 0.0066mm2 780μw Fully Synthesizable PLL with a Current-Output DAC and an Interpolative Phase-Coupled Oscillator Using Edge-Injection Technique

Design and simulation optimization of phase-locked loop structure for phase-shifting power supply