Abstract:A microelectromechanical system (MEMS) torsional resonant magnetometer based on Lorentz force was investigated, consisting of torsional structures, torsional beams, metal plates, a coil, and a glass substrate. The Lorentz force, introduced by the interaction between the current in the MEMS coil and an external horizontal magnetic field, leads to displacement of the torsional structure. The strength of the magnetic field is proportional to this displacement, and can be detected with two sensing capacitors fabricated on the torsion structure and the substrate. To improve sensor sensitivity, a folded torsional beam and a double-layer excitation coil were introduced. The fabrication processes included lift-off, anodic bonding, chemical mechanical planarization, silicon nitride (SiNx) deposition, plasma-enhanced chemical vapor deposition, and inductively coupled plasma release. The prototype of the magnetometer was finished and packaged. The sensor performance, including its sensitivity and repeatability, was tested in a low-pressure environment. Additionally, the influences of structural parameters were analyzed, including the resistance of the excitation coil, the initial value of the capacitors, the elastic coefficient of the torsional beam, and the number of layers in the excitation coil. The test results demonstrated that this sensor could meet the requirements for attitude determination systems in low earth orbit satellites.

MEMS above CMOS process for single proof-mass 3-AXIS Lorentz-force resonant magnetic sensor

Development of Multi-Axes CMOS-MEMS Resonant Magnetic Sensor Using Lorentz and Electromagnetic Forces

Development of CMOS-MEMS in-plane magnetic coils for application as a three-axis resonant magnetic sensor

Single-structure 3-Axis Lorentz Force Magnetometer Based on an AlN-on-Si MEMS Resonator

Design and Analyses of a MEMS Based Resonant Magnetometer

Design And Implementation Of A Novel Cmos-Mems Single Proof-Mass Tri-Axis Accelerometer

A Miniature Resonant and Torsional Magnetometer Based on Lorentz Force

Design and Fabrication of a Miniature Four-Axial Piezoresistive Force/Torque Sensor with MEMS Technology

The design of a MEMS surface resonant magnetometer

A MEMS torsional resonant magnetometer for the attitude determination in space

A Resonant Magnetometer Based on MEMS

Design, fabrication, characterization and reliability study of CMOS-MEMS Lorentz-force magnetometers

Characterization of a Resonant Lorentz Force MEMS Magnetometer

Implementation of A Monolithic Single Proof-Mass Tri-Axis Accelerometer Using Cmos-Mems Technique

Design and Measurement of Microelectromechanical Three-Axis Magnetic Field Sensors Based on the CMOS Technique

CMOS MEMS Lorentz Force Dual-axis Scanning-Stage

Development of a Compliant Magnetic 3-D Tactile Sensor with AMR Elements.

A novel cmos-mems tri-axial tactile force sensor using capacitive and piezoresistive sensing mechanisms

Design and experiment of MEMS magnetic sensor

Out-of-Plane Cmos Compatible Magnetometers

A MEMS Resonant Lorentz-Force Magnetometer with Both Structural Topology Optimization and Parametric Pumping for Q-Factor Enhancement