Abstract:A high-power linearly-polarized all-fiber single-frequency amplifier at 1 µm based on tandem core-pumping is demonstrated by using a large-mode-area Ytterbium-doped fiber with a core diameter of 20 µm, which nicely balances the stimulated Brillouin scattering effect, thermal load, and output beam quality. A maximum output power of more than 250 W with a corresponding slope efficiency of >85% is achieved at the operating wavelength of 1064 nm without being constrained by the saturation and nonlinear effects. Meanwhile, a comparable amplification performance is realized with a lower injection signal power of the wavelength near the peak gain of the Yb-doped fiber. The polarization extinction ratio and the M2 factor of the amplifier are respectively measured to be >17 dB and 1.15 under the maximal output power. In addition, by virtue of the single-mode 1018 nm pump laser, the intensity noise of the amplifier under maximal output power is measured to be comparable to that of the single-frequency seed laser at frequencies higher than 2 kHz, except for the emergence of parasitic peaks that can be eliminated by optimizing the driving electronics of the pump lasers, while the deterioration of the amplification process to the frequency noise and linewidth of the laser is negligible. To the best of our knowledge, this is the highest output power of a single-frequency all-fiber amplifier based on the core-pumping scheme.

High Power Narrow-Linewidth Linearly Polarized Nanosecond All-Fiber Amplifier with Near-Diffraction-Limited Beam Quality

Monolithic High-Average-power Linearly Polarized Nanosecond Pulsed Fiber Laser with Near-Diffraction-limited Beam Quality

Kilowatt high average power narrow-linewidth nanosecond all-fiber laser

560 W All Fiber and Polarization-Maintaining Amplifier with Narrow Linewidth and Near-Diffraction-limited Beam Quality.

High-Power Highly Linear-Polarized Nanosecond All-Fiber Mopa at 2040 Nm

Monolithic Linearly Polarized Nanosecond Fiber Laser With Record Peak Power And Near-Transform-Limited Linewidth

High-peak-power, single-frequency, single-mode, linearly polarized, nanosecond all-fiber laser based on self-phase modulation compensation

414 W Near-Diffraction-limited All-Fiberized Single-Frequency Polarization-Maintained Fiber Amplifier.

All-fiberized master oscillator power amplifier structured narrow-linewidth nanosecond pulsed laser with 505 W average power

240 W High-Average-Power Square-Shaped Nanosecond All-Fiber-Integrated Laser with Near Diffraction-Limited Beam Quality

Single-frequency linearly-polarized 1083 nm all fiber nanosecond laser

A 3.2 Kw Single Stage Narrow Linewidth Fiber Amplifier Emitting at 1050 Nm

A 280 W High Average Power, Single-Frequency All-Fiber Nanosecond Pulsed Laser

All-fiberized and narrow-linewidth 5 kW power-level fiber amplifier based on a bidirectional pumping configuration

3.25 Kw All-Fiberized And Polarization-Maintained Yb-Doped Amplifier With A 20 Ghz Linewidth And Near-Diffraction-Limited Beam Quality

1.89 kW all-fiberized and polarization-maintained amplifiers with narrow linewidth and near-diffraction-limited beam quality.

All-fiberized Single-Frequency Polarization-Maintained Fiber Amplifier with Record Power

189 Kw All-Fiberized and Polarization-Maintained Amplifiers with Narrow Linewidth and Near-Diffraction-limited Beam Quality

325 kW all-fiberized and polarization-maintained Yb-doped amplifier with a 20 GHz linewidth and near-diffraction-limited beam quality

293 W, GHz narrow-linewidth, polarization maintaining nanosecond fiber amplifier with SBS suppression employing simultaneous phase and intensity modulation

Over 250 W Low Noise Core-Pumped Single-Frequency All-Fiber Amplifier