Abstract:A wideband and wide-angle frequency selective surface (FSS) is proposed in this communication. The periodic element consists of a quarter-mode substrate integrated waveguide (QMSIW) cavity surrounded by two identical loop slots located on the top and bottom layers of the cavity. Two transmission poles and one transmission zero are caused by the fundamental mode in the QMSIW cavity, the slot mode, and the coupling between them, respectively. By precisely tuning the dual-mode configuration, the proposed FSS shows a wide passband with a good transmission efficiency and a rapid roll-off at the high side of the operation band due to the transmission zero. With the QMSIW-based miniaturized elements, the FSS is also insensitive to a large angle of incidence. Thanks to the novel structure, several higher order modes close to the target band are suppressed, making the parasitic passband far away from both sides of the designed band. To verify the advantages, a prototype operated at 10 GHz is fabricated and tested. The measured results show a wide passband performance with the 1/3 dB relative bandwidths of 34%/49% for normal incidence, which agree well with the simulated results. Besides, the 3 dB bandwidth still remains 23% for the incident angle of 60°.

Four-band Frequency Selective Surface Based on Quarter-Mode Substrate Integrated Waveguide Technology

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

Wideband and Wide-Angle FSS Based on Quarter-Mode Substrate Integrated Waveguide Technology

Frequency Selective Surface with Miniaturized Elements Based on Quarter-Mode Substrate Integrated Waveguide Cavity with Two Poles

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

Dual-band Frequency Selective Surface with Quasi-Elliptic Bandpass Response

A Novel Frequency Selective Surface with Smaller Size and Wide Band

Wideband and Wide-Angle FSS Using Loop Slotted Hybrid Quarter-Mode Substrate Integrated Cavity With Two Independently Controllable Poles

A Quad-Band Frequency Selective Surface with Highly Selective Characteristics

Narrowband Frequency Selective Surface Based on Substrate Integrated Waveguide Technology

High Roll-Off Frequency Selective Surface With Quasi-Elliptic Bandpass Response

Design of wideband bandpass frequency selective surface based on the patch resonators and substrate integrated waveguide cavities

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

A Dual-Polarized Bandpass Frequency Selective Surface With Stable Response

A Quad-Band Highly Selective Frequency Selective Surface with Ultra-Wideband Rejection

An Ultrawideband Three-Dimensional Bandpass Frequency Selective Surface

A Multi-functional Frequency Selective Polarization Converter Based on Substrate Integrated Waveguide Cavities

Wide‐angle Band‐pass FSS with High‐frequency Selectivity Based on SIW Cavity Technology

140 GHz Frequency Selective Surface Based on Hexagon Substrate Integrated Waveguide Cavity Using Normal PCB Process

A Modified High-Selective Frequency Selective Surface Designed by Multilevel Green's Function Interpolation Method

A Fifth-Order X-Band Frequency Selective Surface with High Selectivity and Angular Stability Based on 3-D Coupling Slot