Abstract:A highly ordered TiO2 nanotube layer was fabricated on fluorine-doped tin oxide-coated glass substrate (FTO) by potentiostatic anodization of pure titanium film at room temperature, which was deposited by radio frequency (RF) magnetron sputtering. The structure and the composition of the as prepared TiO2 nanotubes were characterized by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), UV-Vis transmission spectra, and photoelectrochemistry methods. The results showed that the Ti films converted to TiO2 nanotubes of 380 nm length, 90 nm pore diameter, and 15 nm wall thickness at the voltage of 20 V for 50 min. After annealing at 500 degrees C for 6 h in air, the anatase phase of TiO2 nanotube/FTO transparent electrodes were obtained, which had an average transmittance of 80% in visible wavelength range. The bandgap of TiO2 was determined as 3.28 eV, with a bandgap tail extending to 2.6 eV. Moreover, the photoelectrochemistry measurements indicated that the crystallized electrode exhibited a significant improvement of photoelectrochemical current response in comparison with the as-anodized electrode, and both the electrode potential and UV-illumination surely enhanced the effective separation of the electron-hole pairs, leading to the fact that the photo-induced electrons transferred quickly to the conducting glass via external circuit and formed photocurrent.

Transferable TiO2 Nanotubes Membranes Formed Via Anodization and Their Application in Transparent Electrochromism

Fabrication of Well-Aligned Tio2 Nanotube Arrays with Outstanding Light-Induced Hydrophilicity Performance

Enhanced Electrochromic Properties of Donor–acceptor Polymers Via TiO2 Composite

Fabrication and Photocatalytic Activity of Tio2 Nanofiber Membrane

High Aspect-Ratio Transparent Highly Ordered Titanium Dioxide Nanotube Arrays and Their Performance in Dye Sensitized Solar Cells

Fabrication and Characterization for Transparent Electrodes of Tio2 Nanotube Arrays on Fluorine-Doped Tin Oxide-Coated Glass

Boosting the electrochromic performance of TiO 2 nanowire film via successively evolving surface structure

Transferable and flexible nanorod-assembled TiO₂ cloths for dye-sensitized solar cells, photodetectors, and photocatalysts.

Fabrication of Heterogeneous TiO2-CdS Nanotubular Arrays on Transparent Conductive Substrate and Their Photoelectrochemical Properties

Transferable and Flexible Nanorod-Assembled Tio2 Cloths for Dye-Sensitized Solar Cells, Photodetectors, and Photocatalysts

Deposition of transparent TiO 2 nanotubes-films via electrophoretic technique for photovoltaic applications

Facile Fabrication of Free-Standing TiO2 Nanotube Membranes with Both Ends Open Via Self-Detaching Anodization

Electrochromic Titania Nanotube Arrays for the Enhanced Photocatalytic Degradation of Phenol and Pharmaceutical Compounds

Controllable Synthesis of Well-Ordered TiO2 Nanotubes in a Mixed Organic Electrolyte for High-Efficiency Photocatalysis

Fabrication of Titanium dioxide nanotube photo-electrodes in different electrolyte mixtures and the impacts on their characteristics and photo-catalytic abilities under visible light

Transparent titania nanotubes of micrometer length prepared by anodization of titanium thin film deposited on ITO

Highly-ordered Dye-Sensitized TiO 2 Nanotube Arrays Film Used for Improving Photoelectrochemical Electrodes

A facile route to fabricate an anodic TiO 2 nanotube-nanoparticle hybrid structure for high efficiency dye-sensitized solar cells

Fabrication, Modification, and Emerging Applications of TiO2Nanotube Arrays by Electrochemical Synthesis: A Review

Construction and Photoelectrocatalytic Properties of TiO2 Nanotubes Arrays on Titanium Substrates

Fabrication and photocatalytic properties of free-standing TiO 2 nanotube membranes with through-hole morphology