Abstract:A series of sodium alginate (SA) nanocomposite films with different loading levels of graphitic-like carbon nitride (g-C3N4) were fabricated via the casting technique. The structure and morphology of nanocomposite films were investigated by X-ray powder diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. Thermogravimetric analysis results suggested that thermal stability of all the nanocomposite films was enhanced significantly, including initial thermal degradation temperature increased by 29.1 °C and half thermal degradation temperature improved by 118.2 °C. Mechanical properties characterized by tensile testing and dynamic mechanical analysis measurements were also reinforced remarkably. With addition of 6.0 wt % g-C3N4, the tensile strength of SA nanocomposite films was dramatically enhanced by 103%, while the Young's modulus remarkably increased from 60 to 3540 MPa. Moreover, the storage modulus significantly improved by 34.5% was observed at loadings as low as 2.0 wt %. These enhancements were further investigated by means of differential scanning calorimetry and real time Fourier transform infrared spectra. A new perspective of balance was proposed to explain the improvement of those properties for the first time. At lower than 1.0 wt % loading, most of the g-C3N4 nanosheets were discrete in the SA matrix, resulting in improved thermal stability and mechanical properties; above 1.0 wt % and below 6.0 wt % content, the aggregation was present in SA host coupled with insufficient hydrogen bondings limiting the barrier for heat and leading to the earlier degradation and poor dispersion; at 6.0 wt % addition, the favorable balance was established with enhanced thermal and mechanical performances. However, the balance point of 2.0 wt % from dynamic mechanical analysis was due to combination of temperature and agglomeration. The work may contribute to a potential research approach for other nanocomposites.

Preparation and Property Investigation of Crosslinked Alginate/Silicon Dioxide Nanocomposite Films

Preparation and Characterization of Cross-Linked Starch Nanocrystals and Self-Reinforced Starch-Based Nanocomposite Films

Effect of SiO2, PVA and glycerol concentrations on chemical and mechanical properties of alginate-based films

Preparation and Properties of BOZ/BMI/BADCy Copolymers Modified by Nano-SiO_2

Effect of Nanosilicon Dioxide on Structure and Properties of Poly(Vinyl Alcohol)/ Sodium Carboxymethylcellulose Blending Film

Improvement of Physical Properties of Crosslinked Alginate and Carboxymethyl Konjac Glucomannan Blend Films

Preparation and Characteristic of A Sodium Alginate/Carboxymethylated Bacterial Cellulose Composite with A Crosslinking Semi-Interpenetrating Network

Preparation and Properties of Nano-Silica/Calcium Alginate Blend Fibers

Preparation and Properties of Sodium Carboxymethyl Cellulose/Sodium Alginate/Chitosan Composite Film

Influence of g-C3N4 nanosheets on thermal stability and mechanical properties of biopolymer electrolyte nanocomposite films: a novel investigation

Cationic Polyelectrolyte-Assisted Synthesis of Silica Nanochains for Enhancing Mechanical Properties of Sodium Alginate Composite Films

Theoretical and experimental investigation of sodium alginate composite films containing star anise ethanol extract/hydroxypropyl--cyclodextrin inclusion complex

Preparation, Characterization, and Antibacterial Application of Cross-Linked Nanoparticles Composite Films

Preparation and Characterization of Cellulose/Modified Nano-Sio2 Composites Packaging Films by Nmmo Technology

Preparation, Characterization and Antimicrobial Activity of Sodium Alginate Nanobiocomposite Films Incorporated with Ε-Polylysine and Cellulose Nanocrystals

Study on Structure and Property of Na~+ REC/Sodium Alginate Nanocomposite Film

Effect of Nano-Sio 2 on the Compatibility of PVA/RSF Blend

Theoretical and experimental investigation of sodium alginate composite films containing star anise ethanol extract/hydroxypropyl-β-cyclodextrin inclusion complex

Ionic Cross-Linking Chitosan/Alginate Biodegradable Composite Film

Influence of Nanosilica on Inner Structure and Performance of Chitosan Based Films.

Effect of Sodium Alginate/phosphate-Stabilized Amorphous Calcium Carbonate Nanoparticles on Chitosan Membranes