Abstract:Phase-change memory (PCM) has great potential for numerous attractive applications on the premise of its high-device performances, which still need to be improved by employing a material with good overall phase-change properties. In respect to fast speed and high endurance, the Ti-Sb-Te alloy seems to be a promising candidate. Here, Ti-doped Sb2Te3 (TST) materials with different Ti concentrations have been systematically studied with the goal of finding the most suitable composition for PCM applications. The thermal stability of TST is improved dramatically with increasing Ti content. The small density change of T0.32Sb2Te3 (2.24%), further reduced to 1.37% for T0.56Sb2Te3, would greatly avoid the voids generated at phase-change layer/electrode interface in a PCM device. Meanwhile, the exponentially diminished grain size (from ∼200 nm to ∼12 nm), resulting from doping more and more Ti, enhances the adhesion between phase-change film and substrate. Tests of TST-based PCM cells have demonstrated a fast switching rate of ∼10 ns. Furthermore, because of the lower thermal conductivities of TST materials, compared with Sb2Te3-based PCM cells, T0.32Sb2Te3-based ones exhibit lower required pulse voltages for Reset operation, which largely decreases by ∼50% for T0.43Sb2Te3-based ones. Nevertheless, the operation voltages for T0.56Sb2Te3-based cells dramatically increase, which may be due to the phase separation after doping excessive Ti. Finally, considering the decreased resistance ratio, TixSb2Te3 alloy with x around 0.43 is proved to be a highly promising candidate for fast and long-life PCM applications.

Advantage of Ti-Doped Ge2Sb2Te5 Material for Phase Change Memory Applications

Ta-doped Ge5Sb95 Phase Change Thin Films for High Speed and Low Power Application

Scandium Doped Ge2Sb2Te5 for High-Speed and Low-Power-consumption Phase Change Memory

Outstanding phase-change behaviors of GaGeSbTe material for phase-change memory application

Advantages of Ta-Doped Sb3Te1 Materials for Phase Change Memory Applications

Low Thermal Conductivity in Ge2Sb2Te5–SiOx for Phase Change Memory Devices

Investigation of GeTe/Ge2Sb2Te5 Nanocomposite Multilayer Films for Phase-Change Memory Applications

SiC‐Doped Ge2Sb2Te5 Phase‐Change Material: A Candidate for High‐Density Embedded Memory Application

High thermal stability and fast operation speed phase-change memory devices containing Hf-doped Ge2Sb2Te5 films

Cr-Doped Ge2sb2te5 for Ultra-Long Data Retention Phase Change Memory

Characterization of Cr-doped Sb2 Te3 Films and Their Application to Phase-Change Memory

High Thermal Stability and Fast Speed Phase Change Memory by Optimizing GeSbTe with Scandium Doping

Sb7te3/Ge Multilayer Films for Low Power and High Speed Phase-Change Memory

Understanding Phase-Change Behaviors of Carbon-Doped Ge2sb2te5 for Phase-Change Memory Application

650 Ps SET Speed in Ge2Sb2Te5 Phase Change Memory Induced by TiO2 Dielectric Crystal Plane

Gete/Crsb2te Superlattice-Like Thin Film for Excellent Thermal Stability and High Phase Change Speed

Pt Modified Sb2Te3 Alloy Ensuring High−Performance Phase Change Memory

Ti-Sb-Te alloy: a candidate for fast and long-life phase-change memory.

Phase Change Characteristics of Sio2 Doped Sb2te3 Materials for Phase Change Memory Application

Improved thermal and electrical properties of nitrogen-doped Ge-rich Ge 3Sb 2Te 5 for phase-change memory application

Sb Rich Ge2sb5te5 Alloy For High-Speed Phase Change Random Access Memory Applications