Abstract:Among many catalysts for the electrochemical reduction of CO2, bimetallic materials have been paid more attention on enhanced catalytic activity and product selectivity. Sn is considered as an optional catalyst with excellent application potential due to its high selectivity for formate, low toxicity, low cost, and abundant reserves, which has been widely studied in recent years. However, the catalytic properties of cobalt–tin bimetallic composites have not been reported. In this study, we successfully synthesized the loaded Co/Sn bimetallic carbon matrix composite using the MOF template method and systematically studied the characteristics of the composite for the electrochemical catalytic reduction of CO2. It was found that the formate Faraday efficiency (FEFormate) of the electrode with 1% Co/Sn@C catalyst coating could reach 70% with the total current density of ∼5.6 mA cm–2 at a low applied potential of −0.98 V vs RHE (reversible hydrogen electrode). Studies have shown that Co element mainly in the form of alloy doped into the catalytic materials, with trace amounts of Co doping (≤1%) can effectively improve electrode conductivity properties, increase the electrochemical active site, significantly improve selectivity for formate, and enhance the hydrogen evolution reaction (HER), which leads to more Co element doping playing a negative role. Further, the electrode with carbon paper as the support has more stable electrocatalytic activity, compared to copper foil. Experiments confirmed that the desorption of active metals on the catalyst coating on the electrode surface was the critical factor leading to the decrease in catalytic performance. This brings essential implications for the deactivation of electrodes coated with metallic elements, therefore enhancing the binding ability between the active components and the catalytic surface, or uniformly dispersing the catalytically active sites should be an effective way to improve this kind of electrode life. In addition, the carbon paper-supported 1% Co/Sn@C gas diffusion electrode (GDE) coupled with an alkaline flow cell achieved a remarkable FEFormate of ∼76% and a substantial formate partial current density of ∼24 mA cm–2 at an applied potential of −0.98 V vs RHE. Electrocatalytic experiments in the flow cell for 30 h demonstrated the excellent catalytic stability of the 1% Co/Sn@C GDE during long-term electrochemical activities.

Comparison of electrocatalytic reduction of CO2 to HCOOH with different tin oxides on carbon nanotubes

Stannate derived bimetallic nanoparticles for electrocatalytic CO2 reduction

Nonnitrogen Coordination Environment Steering Electrochemical CO 2 -to-CO Conversion over Single-Atom Tin Catalysts in a Wide Potential Window

Oxidation State Modulation of Bimetallic Tin-Copper Oxide Nanotubes for Selective CO2 Electroreduction to Formate

SnO 2 -Modified Two-Dimensional CuO for Enhanced Electrochemical Reduction of CO 2 to C 2 H 4

Surface Modification of SnO2 Nanosheets Via Ultrathin N-doped Carbon Layers for Improving CO2 Electrocatalytic Reduction

Cobalt Doping in MOF-Derived Carbon-Loaded Tin Nanomaterials for Enhanced Electrocatalytic CO 2 Reduction

Nonnitrogen Coordination Environment Steering Electrochemical CO2-to-CO Conversion over Single-Atom Tin Catalysts in a Wide Potential Window

Mesoporous tin oxide for electrocatalytic CO 2 reduction.

Densely Packed, Ultra Small SnO Nanoparticles for Enhanced Activity and Selectivity in Electrochemical CO2 Reduction

Controlled Preparation of Cross-Linked SnO 2 Hollow Nanotube Networks for Electrocatalytic CO 2 Reduction

Tunable and Efficient Tin Modified Nitrogen‐Doped Carbon Nanofibers for Electrochemical Reduction of Aqueous Carbon Dioxide

Tuning Sn-Catalysis for Electrochemical Reduction of CO2 to CO via the Core/Shell Cu/SnO2 Structure

Effect of the oxidation state and morphology of SnOx-based electrocatalysts on the CO2 reduction reaction

Selective electrocatalytic reduction of carbon dioxide to oxalate by lead tin oxides with low overpotential

Catalytic reduction of CO2 by Al–Sn-CNTs composite for synthesizing formic acid

Electrochemical Reduction of Carbon Dioxide to Formate on Tin–Lead Alloys

Controlled Preparation of Cross-Linked SnO2 Hollow Nanotube Networks for Electrocatalytic CO2 Reduction

Coupled Metal/Oxide Catalysts with Tunable Product Selectivity for Electrocatalytic CO2 Reduction

Ultrathin tin monosulfide nanosheets with the exposed (001) plane for efficient electrocatalytic conversion of CO<sub>2</sub> into formate

Pd-Doped Tin Oxide Nanostructured Catalysts for Electrochemical Reduction of Carbon Dioxide