Abstract:Electrochemical reduction of CO2 (CO2ER) into value-added chemical feedstocks and liquid fuels using renewable energy is a promising route for CO2 recycling.[1] The major challenges are the large overpotential for CO2 activation and the competitive H2 evolution in aqueous mediums.[2] Although some nanostructured noble metal catalysts have demonstrated impressive electrocatalytic activity and selectivity for CO or formate production over CO2ER, the low abundance and high cost limit their large-scale applications.[3] Efficient and cost-effective electrocatalysts with high energy efficiency and product selectivity are highly desirable to drive the development of CO2ER. In our study, we developed a low-cost Sn particle modified N-doped carbon nanofiber hybrid catalyst via a straightforward electrospinning technique coupled with a pyrolysis process.[4] Its electrocatalytic performance was tuned by the coverage of Sn nanoparticles and the structure of N species on the nanofiber surface. The pyridinic-N supported Sn nanodots drove efficient formate formation with a high current density of 11 mA cm-2 and a faradaic efficiency of 62% at a moderate overpotential of 690 mV. After a simple acidic leaching treatment, only atomically dispersed Sn species remained on the surface of pyridinic-N-doped carbon nanofibers. This catalyst dominantly promoted the CO2-to-CO conversion with a high faradaic efficiency of 91% at a low overpotential of 490 mV. The change of product selectivity was attributed to the difference in local chemical and electronic environment (Sn-Sn or Sn-N) surrounding the Sn active sites, which facilitated different intermediate stabilization and reaction pathway. The abundance of Sn nanodots and the strong electronic interaction between Sn and pyridinic-N-doped carbon may promote the formate formation, while the efficient CO production over the Sn atoms modified nanofibers may arise from the intrinsically high activity and selectivity of the formed Sn-N moieties. References [1] J. Qiao, Y. Liu, F. Hong and J. Zhang, Chem. Soc. Rev., 631-675 (43) 2014. [2] E. E. Benson, C. P. Kubiak, A. J. Sathrum, J. M. Smieja , Chem. Soc. Rev. 89-99(38) 2009. [3] Q. Lu, Jonathan Rosen, F. Jiao, ChemCatChem, 38-47 (7) 2015. [4] Y. Zhao, J.J. Liang, C.Y. Wang, J.M. Ma, G.G. Wallace, Tunable and efficient tin modified nitrogen-doped carbon nanofibers for electrochemical reduction of aqueous carbon dioxide, Adv. Energy Mater., accepted on 16/10/2017.

Tunable and Efficient Tin Modified Nitrogen‐Doped Carbon Nanofibers for Electrochemical Reduction of Aqueous Carbon Dioxide

Tunable and Efficient Tin Modified Nitrogen-Doped Carbon Nanofibers for CO2 Electroreduction

Boosting Industrial-Level CO<sub>2</sub> Electroreduction of N-Doped Carbon Nanofibers with Confined Tin-Nitrogen Active Sites via Accelerating Proton Transport Kinetics

Controlled Preparation of Cross-Linked SnO 2 Hollow Nanotube Networks for Electrocatalytic CO 2 Reduction

A Hierarchically Structured Tin-Cobalt Composite with an Enhanced Electronic Effect for High-Performance CO 2 Electroreduction in a Wide Potential Range

Nitrogen Doped Tin Oxide Nanostructured Catalysts for Selective Electrochemical Reduction of Carbon Dioxide to Formate

Atomically dispersed Ni anchored on polymer-derived mesh-like N-doped carbon nanofibers as an efficient CO2 electrocatalytic reduction catalyst

Controlled Preparation of Cross-Linked SnO2 Hollow Nanotube Networks for Electrocatalytic CO2 Reduction

Selective CO2 Reduction to Formate on Heterostructured Sn/SnO2 Nanoparticles Promoted by Carbon Layer Networks

Surface Modification of SnO2 Nanosheets Via Ultrathin N-doped Carbon Layers for Improving CO2 Electrocatalytic Reduction

Pd-Doped Tin Oxide Nanostructured Catalysts for Electrochemical Reduction of Carbon Dioxide

Atomically Dispersed Ni Anchored on Polymer-Derived Mesh-Like N-doped Carbon Nanofibers As an Efficient CO 2 Electrocatalytic Reduction Catalyst

Tailoring Microenvironment for Enhanced Electrochemical CO2 Reduction on Ultrathin Tin Oxide Derived Nanosheets

Enhancing CO2 Electroreduction with Au/Pyridine/Carbon Nanotubes Hybrid Structures.

Efficient CO(2 )electroreduction over Pyridinic-N Active Sites Highly Exposed on Wrinkled Porous Carbon Nanosheets

Nanoporous Intermetallic Cu3Sn/Cu Hybrid Electrodes As Efficient Electrocatalysts for Carbon Dioxide Reduction

Highly-dispersed Nickel Species on Nitrogen-Doped Porous Carbon: Significant Local Ph-Buffering Capacity and Favorable CO Desorption for Efficient and Robust Electro-Reduction of CO2.

Electrospun Nitrogen-Doped Carbon Nanofibers Encapsulating Cobalt Nanoparticles As Efficient Oxygen Reduction Reaction Catalysts

Nanoporous Intermetallic Cu 3 Sn/Cu Hybrid Electrodes as Efficient Electrocatalysts for Carbon Dioxide Reduction

Densely packed ultrafine SnO2 nanoparticles grown on carbon cloth for selective CO2 reduction to formate

Highly Efficient and Selective CO2 Electro-Reduction to HCOOH on Sn Particle-Decorated Polymeric Carbon Nitride.