Abstract:Fracture toughness of CFRP laminates with different central interfaces was calculated by considering the curved crack front shape. Incorporation of variable fracture toughness into a cohesive zone model can better predict the delamination fracture of the laminate. The extensive use of multidirectional composite laminates requires to understand the delamination behavior at interfaces between plies with different fiber orientations. In this study, double cantilever beam testing was performed to investigate the mode I interlaminar fracture of carbon fiber reinforced polymer laminates with different central interfaces (0//0, 0//+45 and +45//−45). X‐ray microtomography revealed the curved crack front shape that was incorporated to calculate fracture toughness. The fracture toughness varies with the crack length in a typical delamination resistance curve, which can be quantified by an empirical equation. Incorporation of variable fracture toughness into a cohesive zone model can better predict the delamination fracture of the laminate, compared to constant toughness. It was found that the delamination mechanism is independent of central interfaces. However, compared to unidirectional laminates, multidirectional laminates are less resistant to crack initiation, but more resistant to propagation with higher toughness and shorter fiber bridging zone. Highlights Mode I interlaminar fracture of CFRP laminates with different central interfaces was investigated experimentally and numerically. Curved crack front shape was incorporated to calculate fracture toughness. Incorporation of variable fracture toughness into a cohesive zone model can better predict the delamination fracture of the laminate. Multidirectional laminates are less resistant to crack initiation but more resistant to propagation with higher toughness and shorter fiber bridging zone.

Bending behaviors and fracture characteristics of laminatedductile-tough composites under different modes

Room temperature tensile fracture characteristics of in situ TiBw/Ti6Al4V composites with a quasi-continuous network architecture

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Multiplied bending ductility and toughness of titanium matrix composites by laminated structure manipulation

Regulating Crack Propagation in Laminated Metal Matrix Composites Through Architectural Control

Effect of fiber orientation of adjacent plies on the mode I delamination fracture of carbon fiber reinforced polymer multidirectional laminates

Temperature-dependent reversed fracture behavior of multilayered TiBw/Ti–Ti(Al) composites

In-situ investigation of deformation behavior and fracture forms of Ti/Al/Mg/Al/Ti laminates

Micro-XCT Characterization and Numerical Analysis of Bending Damage Mechanism in Carbon Fiber Plain, Twill and Winding Composite Tubes

Fracture toughness and fiber bridging mechanism for mode-I interlaminar failure of spread-tow woven composites

Exploring the influence of specimen types on the intralaminar fracture behavior of fiber-reinforced polymer matrix composites

Interlaminar Fracture Behavior of Carbon Fiber/Polyimide Composites Toughened by Interleaving Thermoplastic Polyimide Fiber Veils

The Ductile-Brittle Transition Behaviors of W/Ta Multilayer Composites

Fabrication of Al/Al-TiB 2 laminate composites via hot press sintering process: An insight into the mechanical properties and fracture behavior

Effect of crack size, thickness and span on the transverse mode I fracture characteristics of laminated flattened-bamboo lumber

An integrated computational and experimental study of the failure mode in Mg/Al laminated composite under three-point bending

Characterization of progressive damage behaviour and failure mechanism of carbon fibre reinforced DP590 laminates

Microstructure and Mechanical Properties of Ti-Al-Ti-Ti2AlNb Laminated Composites Based on the Ductile-brittle Structure

Experimental and simulation study on compressive failure evolution of multidirectional laminates with different dimensions

Investigation of the out-of-plane load-bearing capacity of T1100/5405 composite T-stiffened panels

Microstructure evolution and damage mechanism of layered titanium matrix composites under tensile loading