Abstract:Cathode materials play a decisive role in the building of high energy density sodium-ion batteries. Among them, Na3V2(PO4)2O2F (NVPOF) is receiving active attention due to its high structural integrity, satisfactory work voltage, and outstanding energy density. However, its practical application is still impeded by the poor rate performance related to its low intrinsic electronic conductivity. Herein, Na3V2(PO4)2O2F grown on the surface of the core carbon sphere () was initially synthesized via a one-step hydrothermal method. Subsequently, by carbonization of polydopamine, the above particles coated with a uniform N-doped carbon layer (@NC) were successfully fabricated. This sandwiched structure built by a core carbon sphere and carbon layer can significantly improve the electronic conductivity, boost sodium-ion diffusion kinetics, and mitigate volume change of the electrode upon the cycling process. As a result, the as-prepared electrode exhibits a desirable specific capacity of 119.8 mA h g–1 with an attractive capacity retention of 96% after 100 cycles at a current density of 1 C. Even at a high current density of 10 C, the capacity can retain 103.9 mA h g–1, and the capacity decay per cycle is only 0.032% during 500 cycles, indicating outstanding electrochemical performance. All the analyses demonstrate that @NC has enormous potential as an applicable cathode for sodium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00334?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00334</a>.Computational methods, the microstructure of p-NVPOF, Raman spectrum and carbon content of and @NC, XRD patterns of different samples, CV curves of p-NVPOF and at a scan rate of 0.1 mV s–1, charge/discharge curves of p-NVPOF and at a current density of 1 C, charge/discharge curves of @NC at different current densities, the microstructure of @NC at a current density of 10 C after 500 cycles, rate performance of and p-NVPOF, impedance parameters for the equivalent circuits, and the reported Na3V2O2–2x(PO4)2F1+2x materials in the literature (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00334/suppl_file/ae1c00334_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Toward High Power-High Energy Sodium Cathodes: A Case Study of Bicontinuous Ordered Network of 3D Porous Na-3(VO)(2)(PO4)(2)F/rGO with Pseudocapacitance Effect

A High Power–High Energy Na3V2(PO4)2F3 Sodium Cathode: Investigation of Transport Parameters, Rational Design and Realization

Toward high-performance sodium storage cathode: Construction and purification of carbon-coated Na3V2(PO4)2F3 materials

Activating the Inert Na1 Sites in Na<sub>2</sub>FePO<sub>4</sub>F Toward High Performance Sodium Storage

Realizing high-performance Na3V2(PO4)2O2F cathode for sodium-ion batteries via Nb-doping

Insights into Tiny High‐Entropy Doping Promising Efficient Sodium Storage of Na3V2(PO4)2O2F toward Sodium‐Ion Batteries

Exceeding Three-Electron Reactions in Polyanionic Cathode to Achieve High-Energy Density for Sodium-Ion Batteries

In situ redox reaction induced firmly anchoring of Na3V2(PO4)2F3 on reduced graphene oxide & carbon nanosheets as cathodes for high stable sodium-ion batteries

Achieving highly reversible and fast sodium storage of Na4VMn(PO4)3/C-rGO composite with low-fraction rGO via spray-drying technique

Unlocking Rapid and Robust Sodium Storage of Fluorophosphate Cathode via Multivalent Anion Substitution

Ultrafast and Ultrastable High Voltage Cathode of Na2+2xFe2-x(SO4)(3) Microsphere Scaffolded by Graphene for Sodium Ion Batteries

Phase-manipulated hierarchically core-shell Na3(VO1-xPO4)2F1+2x (0≤x≤1)@Na3V2(PO4)3 and its synergistic effect with conformally wrapped reduced graphene oxide framework towards high-performance cathode for sodium-ion batteries

Sodium Vanadium Fluorophosphates (NVOPF) Array Cathode Designed for High‐Rate Full Sodium Ion Storage Device

Revealing the Structural Reversibility of High-Performance Surface-Enhanced NVOPF Cathode Materials for Sodium Ion Batteries

Na3V2(PO4)3/C·Na3V2(PO4)2F3/C@rGO blended cathode material with elevated energy density for sodium ion batteries

Unlocking fast and reversible sodium intercalation in NASICON Na4MnV(PO4)3 by fluorine substitution

Fabrication of a Sandwiched Core Carbon Sphere@Na 3 V 2 (PO 4 ) 2 O 2 F@N-Doped Carbon Cathode for Superior Sodium-Ion Batteries

Electrostatically Shielded Transportation Enabling Accelerated Na+ Diffusivity in High‐Performance Fluorophosphate Cathode for Sodium‐Ion Batteries

High-rate sodium storage performance enabled using hollow Co3O4 nanoparticles anchored in porous carbon nanofibers anode

A Green and Scalable Synthesis of Na 3 Fe 2 (PO 4 )P 2 O 7 /rGO Cathode for High‐Rate and Long‐Life Sodium‐Ion Batteries

Synthesizing Porous NaTi2(PO4)3 Nanoparticles Embedded in 3D Graphene Networks for High-Rate and Long Cycle-Life Sodium Electrodes.