Abstract:Introduction; The aim of this study was to investigate the structure and mechanical properties of newly developed controlled memory (CM) nickel-titanium wires used in the manufacture of rotary endodontic instruments. Methods: The composition and the phase transformation behavior of both types of wires were examined by x-ray energy dispersive spectroscopy and differential scanning calorimetry, respectively. Conventional superelastic (SE) nickel-titanium wire was used as a control. The mechanical properties of the wires at selected temperatures (room temperature, 37 degrees C, and 60 degrees C) were evaluated with tensile, cyclic tensile, and cantilever bending tests by using an Instron 3365 universal testing machine. The data of austenitic transformation finishing temperature (A(f)) were analyzed statistically by using 1-way analysis of variance test at a significance level of P < .05. Results: The raw CM wires contained a nickel content of 50.7% +/- 0.5% and possessed a relatively higher Af than SE wires (P < .05). The critical plateau stress and ultimate tensile strength of the CM wires were lower than they were for the SE wires, but the maximum strain before fracture of the CM wires (58.4% +/- 7.5% to 84.7% +/- 6.8%) was more than 3 times higher than it was for SE wires (16.7% +/- 3.8% to 27.5% +/- 5.4%). The maximum strain of the CM wires with a diameter of 1.22 mm tested at room temperature (23 degrees C +/- 2 degrees C) was up to 84% +/- 6.4%. CM wires were not SE at either room temperature or 37 degrees C; however, they exhibited superelasticity when heated to 60 degrees C. Conclusions: The raw CM wires exhibited different phase transformation behavior and mechanical properties when compared with SE wires, attributing to the special heat treatment history of CM wires. This study suggested greater flexibility of endodontic instruments manufactured with CM wires than similar instruments made of conventional SE wires. (J Endod 2012;38:1535-1540)

Construction and mechanical analysis of finite element model for bending property of controlled memory wire nickel-titanium rotary file

Finite Element Simulation of the Influence of TiC Inclusions on the Fatigue Behavior of NiTi Shape-Memory Alloys

Mechanical Properties of Controlled Memory and Superelastic Nickel-Titanium Wires Used in the Manufacture of Rotary Endodontic Instruments

Finite Element Analysis of Pseudoelastic Behavior of Niti Shape Memory Alloy with Thin-Wall Tube under Extension-Torsion Loading

Experimental and Numerical Study of the Superelastic Behaviour on NiTi Thin-Walled Tube under Biaxial Loading

Bending Property Analysis and Experimental Study of Orthodontic Wires

Experimental and FEM Analysis of the Fracture Behavior in NiTi Shape Memory Alloys

[Metallurgic behavior and mechanical property of nickel-titanium endodontic files made by 3 heat treatment techniques]

Establishment of a 3D FE Model for the Bending of a Titanium Alloy Tube

TEM study of the Ni-Ti shape memory micro-wire

Metallurgical Characterization of Controlled Memory Wire Nickel-Titanium Rotary Instruments

Curvature effect on the mechanical behaviour of a martensitic shape-memory-alloy wire for applications in civil engineering

Mechanical properties analysis of medical endodontic instruments based on parameterization

A novel finite element model and its application in mechanical behavior prediction of catenary wire strand

Finite Element Analysis of a Nitinol Superelastic Stent

DYNAMICAL BEHAVIOR AND CONSTITUTIVE MODEL OF SUPERELASTICITY NITI SHAPE MEMORY ALLOY WIRE : EXPERIMENT AND THEORY

The Study of the Characteristics of Constant-Force Elements Using NiTi SMAs

A Mathematical Model For Describing The Mechanical Behaviour Of Root Canal Instruments

[Bending Mechanical Properties of NiTi Round Wire].

Fatigue stress of nickel-titanium rotary endodontic instruments under curve conditions: a finite element analysis

Comparative Study of Torsional and Bending Properties for Six Models of Nickel-Titanium Root Canal Instruments with Different Cross-Sections.