Abstract:Mode division multiplexing (MDM) technology, based on the parallelism inherent in mode dimensions, provides an advancement in enhancing on-chip optical communication channel capacity. In MDM communication systems, the routing and switching of optical signals are of essential importance. However, conventional multimode optical switches typically follow the demultiplexing-processing-multiplexing technological route, leading to an unavoidable increase in device size. In scenarios where multiple modes need to be routed synchronously, the implementation of simultaneous modulation optical switches offers a more efficient and feasible solution. Here, we propose two 1×2 dual-mode optical switches with simultaneous modulation on a silicon-on-insulator (SOI) platform in the 1525-1565 nm wavelength range, utilizing two optical phase modulation techniques: mode transformation and waveguide widening. Simultaneously, we employ inverse design methodologies based on the adjoint variable method (AVM) and level-set method to create the compact single-connected devices, which are compatible with CMOS fabrication processes. The experimental results show that the insertion losses for both TE0 and TE1 modes are less than 1.6 dB (2.5 dB), with the worst modal crosstalk at most -13.5 dB (-12.7 dB) for the switch based on mode transformation (waveguide widening) strategy at the wavelength of 1550nm. The extinction ratio (ER) of the two proposed optical switches exceeds 25 dB at the same wavelength. Furthermore, the switches exhibit a 10%-90% rise time of 15.2 μs and a 90%-10% fall time of 19.5 μs at 1550 nm, indicating the switching speed can be up to kilohertz (kHz). Our proposed 1×2 optical switches hold potential as a fundamental unit for optical signal switching in high-integration multimode optical communication systems.

Broadband Optical Switch for Multiple Spatial Modes Based on a Silicon Densely Packed Waveguide Array

Low-loss and Broadband 2 × 2 Silicon Thermo-Optic Mach–Zehnder Switch with Bent Directional Couplers

Broadband 2 × 2 Lithium Niobate Electro-Optic Switch Based on a Mach–Zehnder Interferometer with Counter-Tapered Directional Couplers

Mach-Zehnder Based Optical Switches in Silicon-On-Insulator

Silicon-based Flexible-Grid Mode- and Wavelength-Selective Switch Utilizing Microring Resonators and Y-junctions

Compact and Broadband 1 × 4 Optical Switch Based on W2 Photonic Crystal Waveguides

Optical switch based on multimode interference coupler

Highly integrated 3×3 silicon thermo-optical switch using a single combined phase shifter for optical interconnects.

Low Crosstalk 1/spl Times/2 Thermooptic Digital Optical Switch with Integrated S-bend Attenuator

Experimental Demonstration of a Broadband Two-Mode Multi/demultiplexer Based on Asymmetric Y-junctions

On-Chip Selective Dual-Mode Switch for 2-Μm Wavelength High-Speed Optical Interconnection

Ultra-broadband Low-Loss 2×2 MZI (Mach-Zehnder Interferometer)-Based Thermo-Optic Switch with Bent Directional Couplers on Silicon

2×2 Electrooptical Switch in Silicon-on-insulator Waveguide

Mode-Selective Switch Based on Thermo-Optic Asymmetric Directional Coupler

2/spl times/2 electrooptical switch in silicon-on-insulator waveguide

Mach-Zehnder based 2×2 electro-optical switches on silicon-on-insulator with low crosstalk

Compact broadband silicon 3 dB coupler based on shortcuts to adiabaticity.

Two-mode-interference Switching in Photonic Crystal Waveguides

Design of an Ultra-Broadband Silicon Mode (De)multiplexer

Broadband and Compact Two-Mode Switch Using a Graphene–silicon Y-junction

Dual-mode 1×2 optical switch with simultaneous modulation based on inverse design devices