Abstract:To solve the contact/impact problem of flexible bodies in arbitrary shape, the finite element method is widely used to discretize the contact bodies. In the finite element method, two contact models are mainly used to compute the contact force, i.e., penalty function method and additional constraint method, which are different in constraint imposition strategy. The penalty function method regards the contact effect as a force function of local penetration at the contact point and its rate. This method has gained significant popularity because it does not bring extra dimensions to the dynamic equations and does not need to solve constraint equations either. However, as the non-penetration constraint is not precisely satisfied in the contact process when using the penalty function method, the accuracy of the numerical simulation depends on the choice of the penalty parameter. On the other hand, the additional constraint method can strictly satisfy the contact constraint condition by introducing the Lagrange multipliers into the dynamic equations, but the method poses some numerical difficulties due to the additional effort required to solve the multipliers. Considering the advantages and disadvantages of the two contact methods, the interactive mode method is proposed. This method divides the whole model into local static module and main dynamics module. The static module establishes a local finite element model of the contact region to compute the contact force, and the main dynamics module is used to obtain the kinematic variables of the whole body. In the simulation, the two modules are coupled by exchanging displacements and forces in each time step. In the current integration step, the main dynamics module provides the displacements of the boundaries of the local contact region at first, the values are transferred to the local finite model to compute the contact force next, and then the contact force is fed back to the dynamics module for the calculation of the next step. The proposed method combines the advantages of both the additional constraint method and the penalty function method, in which not only the artificial selection of penalty parameter is avoided, but also the non-penetration constraint of local contact region is satisfied and the numerical solution is convenient. The validity of the proposed method is verified by the comparison between simulation results and experimental results of a rod-plate impact case. Furthermore, a multi-point impact problem of a slider sliding in the gap chute is presented to validate the proposed method of dealing with the general impact problem.

Rapid Finite Element Modeling Method of TBM Gripping-thrusting-regripping Mechanism

A Novel Control Strategy of Gripper and Thrust System of TBM Based on Model Analysis

Coordinated Control of Gripper and Thrust System for TBM Based on Construction Data

Thermo-mechanical Coupling Analysis of a High-Speed Actuating Mechanism Based on a New Thermal Contact Resistance Model

Coordinated control of gripper and thrust system for single gripping TBM

Design and simulation analysis of gripper and thrust energy-saving system for TBM test rig

Experiment and Numerical Simulations of a Slug Rivet Installation Process Based on Different Modeling Methods

Numerical simulation of cutterhead and soil interaction in slurry shield tunneling

Sensitivity Analysis of an Open TBM Gripping-Thrusting-regripping Mechanism Based on the Natural Characteristics

Method to Avoid the Structural Interference of the Thrust System of a Shield Tunneling Machine

Dynamic Modeling of Gripper Type Hard Rock Tunnel Boring Machine

A nonlinear dynamics model of TBM with variable contact stiffnesses of the grippers and the hinges

Multi-scale simulation method with coupled finite/discrete element model and its application

Modeling on Stiffness of Gripper in Hardrock TBM

A multi-mesh FE modeling method for nonlinear dynamic analysis of a super-large-scale tunnel structure

A new variable stiffness method to simulate the interaction between the surrounding rock and supporting structure of circular tunnels

Development and evaluation of a process-oriented 3D finite element model for earth pressure balance shield tunneling

Dynamic Behavior of Thrusting System of Tunnel Boring Machines With Variable Constraint Conditions

Dynamic Modeling Method of Flexible Bodies with Contact/impact Based on Interactive Mode

A Study on the Mechanisms of Tension-Shear Failure and the Estimation Model for Key Parameters of Free-Face-Assisted Rock Breaking

Dynamic characteristic analysis of TBM tunnelling in mixed-face conditions