Abstract:In recent years, P2-layered manganese-based cathodes have garnered considerable attention because of their exceptional capacity, high energy density, and facile synthesis. Nevertheless, the poor rate capability and inferior capacity retention at high discharge rates have limited their application in commercial batteries. In this work, we report a stable P2-type Na0.62K0.05Mn0.67Ni0.17Mg0.11Zn0.05O2 layered oxide cathode material with both alkali metal site doping and transition metal site doping and confirm that the synergistic effect of the K–Mg–Zn system suppresses the phase transition of P2–O2 and reduces the activation energy of interfacial charge transfer. Furthermore, the introduction of the K–Mg–Zn system results in favorable cycling stability rate performance of the sample. Specifically, the initial discharge capacity at 0.1C is measured to 140.9 mAh g–1, with a capacity retention of 95.1% after 100 cycles at 1C. Remarkably, even after 2000 cycles at 20C, the capacity retention remains at 82.8%. Ex situ X-ray photoelectron spectroscopy (XPS) analysis and the density functional theory (DFT) calculation reveal that the charge compensation during the KNMMZ charging and discharging process can be interpreted as the cooperative action of Mn3+/Mn4+ and Ni2+/Ni3+/Ni4+ redox couples in the voltage range of 2–4 V, while peaks around 4.2 V are attributed to the anionic redox action. Ex situ X-ray diffraction (XRD) analysis reveals the pronounced capability of KNMMZ to effectively suppress the P2–O2 phase transition. The complex impedance measurements and the galvanostatic intermittent titration technique validate that the K–Mg–Zn system enhances the diffusion of sodium ions. Furthermore, the full cell demonstrates outstanding cyclic electrochemical performance, underscoring its exceptional stability and durability throughout multiple charge–discharge cycles. Consequently, the P2-type Na0.62K0.05Mn0.67Ni0.17Mg0.11Zn0.05O2 system presents promising prospects for the advancement of high-energy SIBs in practical applications.

Modulating the Interlayer Spacing and Na+/Vacancy Disordering of P2-Na0.67MnO2 for Fast Diffusion and High-Rate Sodium Storage.

Designing High-Performance Nanostructured P2-type Cathode Based on a Template-free Modified Pechini Method for Sodium-Ion Batteries

Research on Sodium Storage Performance of Cu and Mg Doped P2 Type Layered Oxide Cathode Materials

A Comprehensive Modification Enables the High Rate Capability of P2-Na0.75Mn0.67Ni0.33O2 for Sodium-Ion Cathode Materials

Designing Water/air-Stable P2-layered Cathodes with Delayed P2–O2 Phase Transition by Composition and Structure Engineering for Sodium-Ion Batteries at High Voltage

Tuning P2-Structured Cathode Material by Na-Site Mg Substitution for Na-Ion Batteries.

Fast and highly reversible Na+ intercalation/extraction in Zn/Mg dual-doped P2-Na0.67MnO2 cathode material for high-performance Na-ion batteries

Stable Electrochemical Properties of Magnesium-Doped Co-Free Layered P2-Type Na 0.67 Ni 0.33 Mn 0.67 O 2 Cathode Material for Sodium Ion Batteries

Suppressing the P2‐O2 phase transition and Na+/vacancy ordering in Na0.67Ni0.33Mn0.67O2 by a delicate multicomponent modulation strategy

Na vacancies and Li doping synergistically constructed P2-type Na0.5Li0.1Ni0.2Mn0.7O2 as high-performance cathode material for sodium-ion batteries

High-Voltage Na0.76Ni0.25- x/2Mgx/2Mn0.75O2- xFx Cathode Improved by One-Step In Situ MgF2 Doping with Superior Low-Temperature Performance and Extra-Stable Air Stability

Dielectric polarization in MgFe2O4 coating and bulk doping to enhance high-voltage cycling stability of Na2/3Ni1/3Mn2/3O2 cathode material

Electrochemical Performance Optimization of Layered P2‐Type Na0.67MnO2 Through Simultaneous Mn‐Site Doping and Nanostructure Engineering

Electrochemical Mechanism Analysis of Dual-Site Doped on P2-Na 2/3 Ni 1/3 Mn 2/3 O 2 Enabling Anionic and Cationic Redox with Excellent Electrochemical Performance

Improving high-voltage high-rate performance of P2 layered oxide cathode by dual-ion doping strategy for sodium-ion batteries

Ca/Mg dual-doping P2-type Na0.67Ni0.17Co0.17Mn0.66O2 cathode material for sodium ion batteries

Structural Regulation of P2‐Type Layered Oxide with Anion/Cation Codoping Strategy for Sodium‐Ion Batteries

P2/O3 biphasic Ni/Fe/Mn-based layered cathode with high capacity and great cyclability for sodium-ion batteries

Tuning Na Occupation and Annealing Temperature on Na Diffusion Pathways in P2-Type NaxNi0.25Mn0.75O2 for Sodium-Ion Batteries by Ab Initio Calculations

Improving Na + Diffusion and Performance of P2-Type Layered Na 0.6 Li 0.07 Mn 0.66 Co 0.17 Ni 0.17 O 2 by Expanding the Interplanar Spacing

Na+/vacancy Disordering Promises High-Rate Na-ion Batteries