Abstract:P2-type layered Na0.67MnO2 has been considered to be a promising candidate cathode material for sodium ion batteries. Nevertheless, the undesired phase transitions during operation and the large Na+ radius induced sluggish ion diffusion remain the stumbling blocks to realize its high performance. Herein, we propose a Zn/Mg co-doping strategy, which is proved to have bifunctional effects. First, relative to the pristine P2-Na0.67MnO2 and the single-ion (Zn/Mg) doped samples, the Zn/Mg dual-doped P2-Na0.67MnO2 demonstrates a lower Mn3+/Mn4+ ratio and a higher lattice O content, which facilitate the structural stability of the cathode material. More intriguingly, the Zn/Mg co-doping gives rise to enlarged interplanar spacing, which provides spacious ion diffusion channels for fast Na+ intercalation/extraction. As a result, the Zn/Mg dual-doped sample exhibits a high Na+ diffusion coefficient and a solid-solution reaction during charge/discharge, with a cell volume change determined to be only 0.55%. Taking advantages of the above favorable features, the Zn/Mg dual-doped P2-Na0.67MnO2 demonstrates a high rate performance with 67.2 mAh·g−1 delivered at 10 C and a decent cycling stability with a capacity retention of 93.8% achieved at 1 C after 100 cycles. This work introduces the Zn/Mg co-doping strategy to simultaneously improve the cycling stability and rate capability of P2-Na0.67MnO2, which may offer a promising avenue for further performance enhancement of the layered Na-ion batteries cathode materials.

Research on Sodium Storage Performance of Cu and Mg Doped P2 Type Layered Oxide Cathode Materials

Stable Electrochemical Properties of Magnesium-Doped Co-Free Layered P2-Type Na 0.67 Ni 0.33 Mn 0.67 O 2 Cathode Material for Sodium Ion Batteries

Development of lithium-free P2-type high-sodium content cathode materials with enhanced cycle and air stability for sodium-ion batteries

Ca/Mg dual-doping P2-type Na0.67Ni0.17Co0.17Mn0.66O2 cathode material for sodium ion batteries

Tuning P2-Structured Cathode Material by Na-Site Mg Substitution for Na-Ion Batteries.

Sodium‐Rich, Co‐Ni‐Free P2‐Layered Manganese Oxide Cathodes for Sodium‐Ion Batteries

Structural Regulation of P2‐Type Layered Oxide with Anion/Cation Codoping Strategy for Sodium‐Ion Batteries

Cu-substitution P2-Na0.66Mn1-Cu O2 sodium-ion cathode with enhanced interlayer stability

High-Operating Voltage, Long-Life Layered Oxides for Sodium Ion Batteries Enabled by Cosubstitution of Titanium and Magnesium

Detailed Structural and Electrochemical Comparison between High Potential Layered P2-NaMnNi and Doped P2-NaMnNiMg Oxides

Theoretical and Experimental Optimization of P2‐Type Sodium‐Ion Battery Cathodes via Li, Mg, and Ni Co‐Doping: A Path to Enhanced Capacity and Stability

Insight into effects of divalent cation substitution stabilizing P2-Type layered cathode materials for sodium-ion batteries

Ca/Li Synergetic‐Doped Na0.67Ni0.33Mn0.67O2 to Realize P2‐O2 Phase Transition Suppression for High‐Performance Sodium‐Ion Batteries

Cu-doped layered P2-type Na0.67Ni0.33-xCuxMn0.67O2 cathode electrode material with enhanced electrochemical performance for sodium-ion batteries

Orthorhombic Na2/3Cu0.1Mn0.9O2 cathode: Enhanced Na storage performances with the suppressed Mn–O bond anisotropy

A dual-modification strategy for P2-type layered oxide via bulk Mg/Ti co-substitution and MgO surface coating for sodium ion batteries

Construction of Cu-Zn Co-doped layered materials for sodium-ion batteries with high cycle stability

Fast and highly reversible Na+ intercalation/extraction in Zn/Mg dual-doped P2-Na0.67MnO2 cathode material for high-performance Na-ion batteries

P3-type layered Na0.26Co1−xMnxO2 cathode induced by Mn doping for high-performance sodium-ion batteries

Dielectric polarization in MgFe2O4 coating and bulk doping to enhance high-voltage cycling stability of Na2/3Ni1/3Mn2/3O2 cathode material

The Effects of Dual Modification on Structure and Performance of P2-type Layered Oxide Cathode for Sodium-Ion Batteries