Abstract:The backflow power in dual-active bridge (DAB) converters can cause power circulation in the H-bridge instead of flowing to the load, which increases the power loss of switching devices and magnetic components and lowers the system's efficiency. Hence, a unified optimal modulation strategy (UOMS) is proposed in this article to reduce the backflow power and consequently improve the system efficiency. However, there is a conflict between minimizing the backflow power and achieving the zero-voltage-switching (ZVS) conditions of all the switching devices. Hence, a regulatory factor " gamma" is introduced into the control variables to minimize the backflow power on the premise of all ZVS conditions, and hence, comprehensively improve the system efficiency. Moreover, the regulatory factor " gamma" simplifies the calculation form of the control variables, which is easier to perform in the controller and can effectively shorten the computational time. According to the value ranges of the control variables (D-0, D-1, and D-2) in the proposed UOMS, 12 operating modes are classified and four effective modes are detailed. For the four effective modes, the optimal triple-phase shift (TPS), optimal primary-dual-phase shift (PDPS), and optimal secondary-dual-phase shift (SDPS) modulation strategies are derived and their switching relationships are revealed. With various transferred powers, the proposed UOMS combines the optimal TPS, PDPS, SDPS, and SPS modulation strategies and can realize smooth and seamless transition switching processes among them in the full operating range. Therefore, the DAB converter can always operate in the optimal states for the full operating range of both the "Buck Mode" (k > 1) and "Boost Mode" (k < 1). Finally, experimental results verify the correctness of the theoretical analysis and the effectiveness of the proposed UOMS.

General Modulation Optimization Methods of Dual-Active-bridge (DAB) Converters

ZVS Operation of DAB Converter Based on Triple-Phase-shift Modulation Scheme with Optimized Inductor Current

Analysis and Optimal Modulation for 2/3-Level DAB Converters to Minimize Current Stress with Five-Level Control

Wide-Load Range Multiobjective Efficiency Optimization Produces Closed-Form Control Solutions for Dual Active Bridge Converter

Overview of Multi-Degree-of-Freedom Modulation Techniques for Dual Active Bridge Converter

A Collaborative Modulation Method of Dual-Side Backflow Power Optimization and Zero-Voltage Switching for Dual Active Bridge

An Optimized Modulation Strategy for the Three-Level DAB Converter With Five Control Degrees of Freedom

Optimal Control of Multi-Level DAB Converters for Soft-Switching and Minimum Current Stress

Asymmetric phase shift modulation strategy of DAB converters for improved Light load Efficiency

Modulation of 2/3-Level Dual-Active-Bridge DC-DC Converters for Soft-Switching and Minimum Current Stress.

Improved Active Disturbance Rejection Control for the DAB Converter with 4-DF Modulation

A Unified Optimal Modulation Strategy for DAB Converters to Tradeoff the Backflow Power Reduction and All ZVS in the Full Operating Range

Optimal Dual-Side Asymmetric Modulation Strategy for Dual Active Bridge Converter to Improve Efficiency over a Wide Voltage Range

Integrated Optimization of Dual-Active-Bridge DC–DC Converter with ZVS for Battery Charging Applications

Hybrid Duty Modulation for Dual Active Bridge Converter to Minimize RMS Current and Extend Soft-Switching Range Using the Frequency Domain Analysis

An Analog-based, Duty Cycle Modulation Method to Remove the DC Bias in the Transformer for a Dual Active Bridge Converter

A Unified Optimal Modulation Strategy for DAB Converters to Trade-off the Backflow Power Reduction and All ZVS in the Full Operating Range

Modeling and Analysis of a Dual-Active-Bridge-Isolated Bidirectional DC/DC Converter to Minimize RMS Current With Whole Operating Range

Loss Imbalance and Transient DC-Bias Mitigation in Dual-Active-Bridge DC/DC Converters

Modulation and Soft-Switching Optimization Control of Multilevel Dual Active Bridge DC-DC Converters

Dual-Side Asymmetric Duty Modulation Based on Accurate Soft-Switching Characteristics Modeling for DAB-Based DC Microgrid