Abstract:Purpose To eliminate the angle deviation of magnetic encoder, this paper aims to propose a compensation method based on permanent magnet synchronous motor (PMSM) sensorless control. The paper also describes the experiments performed to verify the validity of this proposed method. Design/methodology/approach The proposed method uses PMSM sensorless control method to get high precision virtual angle value, and then get the deviation value between virtual position and magnetic angle which is used as compensation table. Oversampling linear interpolation tabulation method has been proposed to eliminate the noise signals. Finally, a magnetic encoder with precision (repeatability) 0.09° and unidirectional motion precision 0.03 is realized. The control system with an encoder running at 14,000 and 0.01 r/min showing high motion resolution is also realized. Findings Higher value of current in PMSM leads to a magnetic encoder with higher precision. When using oversampling linear interpolation to tabulate the compensation table, it is understood that more oversampling does not lead to a better result. Finally, validated by experiments, using eight intervals to calculate the mean value of angle deviation leads to the best result. Practical implications The angle deviation compensation method proposed in this paper has a great practical implication and a good commercial application. The method proposed in this paper could be effectively used to self-correct the magnetic encoder using arctangent method and also correct any rotary encoder sensor. Originality/value This paper originally proposes an adaptive correction method for a rotary encoder based on PMSM sensorless control. To eliminate the noise signals in an angle compensation table, over-sampling linear interpolation tabulation method has been proposed which also guarantees the precision of the compensation table.

M/T Method Based Incremental Encoder Velocity Measurement Error Analysis and Self-Adaptive Error Elimination Algorithm.

Research on Digital Estimation Method of Motor Speed and Rotor Position

Calibration of Incremental Position Encoder for the Precise Measurement of Low Speeds

A Calibration Strategy for EV Drives Based on Improved MTPV Table Decoupled from Permanent Magnet Flux Linkage Variation

Model Predictive Direct Speed Control of Permanent-Magnet Synchronous Motors with Voltage Error Compensation

Precise Control for Permanent Magnet Synchronous Motor Based on Kalman Filter

Filtering algorithm of speed for PMSM based on incremental Kalman filter

Nonlinear Speed Sensorless Control Of Pmsm Drives

A New Method for Rotor Inertia Measurement Base on Motor Free Retardation

Study on High Precision Magnetic Encoder Based on Pmsm Sensorless Control

Speed-Sensorless Control of Induction Motor Drives with a STA-FLL Speed Estimation Scheme

A New Error Measurement Method to Identify All Six Error Parameters of A Rotational Axis of A Machine Tool

Study on Compensation Method of Encoder Pulse Errors for Permanent Magnet Synchronous Motor Control

High Resolution Digital Velocity Detection and Dynamic Position Detection Methods

Self-Calibration Method for Circular Encoders Based on Inertia and a Single Read-Head

Correction of Rotor Position Estimation Error for High-Speed Permanent Magnet Synchronous Motor Sensorless Drive System Based on Minimum-Current-Tracking Method

Research on the EMA Control Method Based on Transmission Error Compensation

Adaptive linear neuron-based encoder measurement error compensation in vector control of two-phase stepping motors

Speed Estimation Method of Linear Motor Extended Kalman Filter Based on Attenuation Memory

Incremental Encoder Speed Acquisition Using an STM32 Microcontroller and NI ELVIS

Methods for Reducing Subdivision Error within One Signal Period of Single-Field Scanning Absolute Linear Encoder