Abstract:Structural Health Monitoring, Ahead of Print. This paper presents a new approach for damage detection in thin plates by fusing variational mode decomposition and spectral entropy (VMD-SE). In this method, after the received signal is decomposed into some intrinsic mode functions (IMFs) by variational mode decomposition (VMD), the spectral entropy ratio of the first and last IMFs is calculated for optimizing the VMD's parameters and improving its decomposition performance. Moreover, the cross-correlation coefficient between the decomposed IMFs and the reference signal is computed to separate the desired IMF, which contains more damage information. Finally, the spectral entropy of the obtained IMF is calculated as an indicator for assessing the damage's severity. The comparative analysis of the simulated signal clearly shows that only the proposed method can successfully separate the damage-related and reference signals. To verify the VMD-SE method, damage detection of two different types of damage on aluminum and composite fiber-reinforced polymer (CFRP) plates is conducted by using this new approach. The experimental results demonstrate that the parameters of VMD affect greatly its decomposition performance, and the best parameters are selected. The results also indicate that the normalized spectral entropy monotonically increases when the diameter of the through-hole or the length of the scratch increases. In addition, the correlation coefficients of the fitting lines of the plates are larger than 0.998. The experimental results of aluminum specimens demonstrate that the damage's location has an influence on the normalized spectral entropy. At last, based on the linear relationship, the severity of damage in the fourth specimen is identified. The identification results demonstrate that the relative error of the aluminum and CFRP plates is less than 7.34%, which indicates that this new algorithm by fusing VMD and spectral entropy can detect the damage size in thin plates accurately and efficiently.

Probabilistic Diagnostic Algorithm-Based Damage Detection for Plates with Non-uniform Sections Using the Improved Weight Function

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Damage detection in thick plate structures based on ultrasonic SH wave

Nondestructive Testing Method Based on Lamb Waves for Localization and Extent of Damage

A Density Clustering RAPID Based on an Array-Compensated Damage Index for Quantitative Damage Diagnosis

Guided waves-based damage identification in plates through an inverse Bayesian process

Damage Identification Method Based on Ultrasonic Guided Wave Sensor Network and Path Optimization Bayesian Fusion Algorithm

Lamb Wave Based Multistage Damage Detection Method

Experiments for the Assessment of the Probabilistic Multistage Algorithm for Damage Detection in Flat and Curved CFRP Panels

Elliptical Ring Distribution Probability-Based Damage Imaging Method for Complex Aircraft Structures

Probability-based diagnostic imaging for damage identification of stiffened composite panel

Damage Detection of Composite Plates by Lamb Wave Ultrasonic Tomography with a Sparse Hexagonal Network Using Damage Progression Trends

Damage detection of thin plates by fusing variational mode decomposition and spectral entropy

Lamb Wave-Based Damage Localization and Quantification in Composites Using Probabilistic Imaging Algorithm and Statistical Method

Application of Damage Detection of Metal Structure Lamb Wave Modal Superposition Imaging Based on Scanning Laser Vibration Measurement

Modified minimum variance imaging of Lamb waves for damage localization in aluminum plates and composite laminates

Damage detection and localization in plate-like structures using sideband peak count (SPC) technique

Local Interrogations for Detection of Multiple Defects Using an Active Sensor Network

Detecting delamination defects in CFRP plates using nonlinear defect index of air-coupled Lamb waves and adaptively weighted imaging algorithm

Characterization of Damage Size in Metallic Plates Using Lamb Waves

Damage assessment using the Lamb wave factorization method