Abstract:Rock is the main construction material of rock engineering, such as the engineering of mines and tunnels; in addition, its mechanical properties and failure laws are of great significance to the stability evaluation of rock engineering, especially under the conditions of coupled static-static stresses. In this study, granite specimens were manufactured with artificial flaws. Coupled static and dynamic loads tests were carried out with a modified split Hopkinson pressure bar (SHPB) apparatus; and six typical levels of axial pre-stresses and three crack inclination angles were designed. Three-dimensional digital image correlation (3D-DIC) was also applied to record and analyze the fracturing process and damage evolution of the specimens. The test results show that there was no compaction stage in the stress-strain curve under combined dynamic and static loading. The dynamic strength of the specimens increased first and then decreased with the increase in the static pressure; moreover, the specimens reached the maximum dynamic strength when the static pressure was 10% UCS. The dynamic strength decreased first and then increased with the increase in the crack inclination angle; and the lowest strength appeared when the inclination angle was 45°. The change in axial compression had a significant influence on the failure mode, and the failure mode gradually transformed from shear-tensile failure to shear failure with the increase in the pre-stress. The tensile strain was usually generated at the end of the fractures or near the rock bridge. When the axial pressure was small, the tensile strain zone parallel to the loading direction was easily generated; and when the axial pressure was large, a shear strain zone developed, extending along the diagonal direction. The research results can provide a theoretical reference for the correct understanding of the failure mechanisms of granite and its engineering stability under actual conditions.

Mechanical Behavior of a Granite from Wuyi Mountain: Insights from Strain-Based Approaches

Uniaxial Compressive Behavior of Granite at High Strain Rates

Damage Characteristics of Granite Under Hydraulic and Cyclic Loading–Unloading Coupling Condition

An Experimental and Modeling Investigation on Creep Mechanical Behavior of Granite Under Triaxial Cyclic Loading and Unloading

Mechanical behaviors and damage constitutive model of pre-damaged and saturated granites under uniaxial compression

A coupled strain softening and hardening model for completely weathered granite in a fault zone

Characteristic stress response law and fracture precursor of granite under different dynamic disturbance damage conditions

Experimental Study on Mechanical Properties and Failure Laws of Granite with Artificial Flaws under Coupled Static and Dynamic Loads

Experimental research on the mechanical properties and energy transfer of fractured granite under triaxial loading

Effect of confining pressure on deformation and strength of granite in confined direct tension tests

Mechanism Interpretation of Sub-critical Crack Growth in Beishan Granite Subjected to Cyclic Loading

A Thorough Investigation of the Dynamic Properties of Granite under Cyclic Loading

Dynamic Mechanical Properties and Damage Evolution Characteristics of Beishan Deep Granite under Medium and High Strain Rates

Comparison Study on Damage Characteristics of Deeply Buried Granite Under Triaxial Cyclic Loading and Unloading

An improved strain-softening constitutive model of granite considering the effect of crack deformation

An experimental investigation on the damage of granite under uniaxial tension by using a digital image correlation method

Experimental Study on Effects of Cyclic Loading Paths on Cracking Behavior and Fracture Characteristics of Granite

Role of Loading Rate on Cracking Behavior in Granite Disks With Laboratory Experiments and Grain‐Based Modeling

Effects of temperature and increasing amplitude cyclic loading on the mechanical properties and energy characteristics of granite

Mechanical and damage evolution characteristics of granite after heating-cooling cycles

Static and dynamic failure mechanisms of circular granite under the condition of water-heat cycles