Abstract:The sliding contact shakedown map composed of elastic shakedown limit and elastic limit is significant to the further optimization of functionally graded (FG) coating parameters. The friction heat induced by the relative sliding velocity of contact pairs can cause thermal stress and changes in contact parameters. Nevertheless, the influence of thermo-mechanically coupled effect on the sliding contact shakedown map of FG coating-substrate structures keeps unrevealed. Therefore, a mathematical optimization model is proposed to draw the shakedown map considering the temperature-dependent friction coefficient and yield stress. Based on the thermo-elasto-perfectly plastic material model and multilayered approximation of FG coating, the required thermo-elastic stress field with the temperature-dependent friction coefficient is obtained by employing the conjugate gradient method and discrete convolution-fast Fourier transform algorithm. The results show that the friction heat can cause the decreases of elastic shakedown limit and elastic limit, and increasing the sliding velocity can enhance the decreases. Moreover, the friction heat can elevate the residual tensile stress near the surface and weaken the residual compressive stress at a large depth from the surface. Meanwhile, the temperature-dependence of friction coefficient can cause the increases of elastic shakedown limit and elastic limit, but the introduction of temperature-dependent yield stress brings no obvious change to the shakedown curves due to the slight thermally-induced change of yield stress. Additionally, decreasing the distribution gradient index can not only improve elastic limit and elastic shakedown limit at large friction coefficients, but also reduce the distribution of residual tensile stress near the surface.

The Coupled Thermoelastic Instability of FGM Coatings with Arbitrarily Varying Properties: In-Plane Sliding

Thermoelastic instability of functionally graded materials with interaction of frictional heat and contact resistance

Analyzing Performance of Automobile Brake Drum in 3D Thermo-elastic Coupling Field

Novel Semi-Analytical Solutions For The Transient Behaviors Of Functionally Graded Material Plates In The Thermal Environment

Magneto-Thermo-Elastic Theoretical Solution for Functionally Graded Thick-Walled Tube under Magnetic, Thermal and Mechanical Loads Based on Voigt Method

Thermo-elastic Dynamic Instability of an Elastic Half-Plane Sliding Against a Coated Half-Plane

Thermoelastic Contact Analysis of Functionally Graded Materials with Properties Varying Exponentially

Thermo-elastoplastic sliding frictional contact and wear analysis of FGM-coated half-planes

Elastic shakedown analysis of two-dimensional thermo-elastic rolling/sliding contact for a functionally graded coating/substrate structure with arbitrarily varying thermo-elastic properties

Thermo-mechanically coupled sliding contact shakedown analysis of functionally graded coating-substrate structures

Thermo-mechanical contact problems and elastic behaviour of single and double sides functionally graded brake disks with temperature-dependent material properties

Modeling of fully coupled thermo-elastic sliding contact of coated systems

Three-dimensional tractive rolling contact analysis of functionally graded coating-substrate systems with interfacial imperfection and frictional anisotropy

A Simulation Method of Thermo-Mechanical and Tribological Coupled Analysis in Dry Sliding Systems

The Effect of Functionally Graded Materials on Temperature during Frictional Heating at Single Braking

Thermomechanical Coupling Simulation and Analysis of Wet Multi-Disc Brakes During Emergency Braking

3D Thermoelasticity Solutions for Functionally Graded Thick Plates

Two-dimensional sliding frictional contact of functionally graded materials

A thermomechanical model for the analysis of disc brake using the finite element method in frictional contact

Axisymmetric thermoelastic contact of an FGM-coated half-space under a rotating punch

Crack Problems for Functionally Graded Materials under Transient Thermal Loading