Abstract:The sliding contact shakedown map composed of elastic shakedown limit and elastic limit is significant to the further optimization of functionally graded (FG) coating parameters. The friction heat induced by the relative sliding velocity of contact pairs can cause thermal stress and changes in contact parameters. Nevertheless, the influence of thermo-mechanically coupled effect on the sliding contact shakedown map of FG coating-substrate structures keeps unrevealed. Therefore, a mathematical optimization model is proposed to draw the shakedown map considering the temperature-dependent friction coefficient and yield stress. Based on the thermo-elasto-perfectly plastic material model and multilayered approximation of FG coating, the required thermo-elastic stress field with the temperature-dependent friction coefficient is obtained by employing the conjugate gradient method and discrete convolution-fast Fourier transform algorithm. The results show that the friction heat can cause the decreases of elastic shakedown limit and elastic limit, and increasing the sliding velocity can enhance the decreases. Moreover, the friction heat can elevate the residual tensile stress near the surface and weaken the residual compressive stress at a large depth from the surface. Meanwhile, the temperature-dependence of friction coefficient can cause the increases of elastic shakedown limit and elastic limit, but the introduction of temperature-dependent yield stress brings no obvious change to the shakedown curves due to the slight thermally-induced change of yield stress. Additionally, decreasing the distribution gradient index can not only improve elastic limit and elastic shakedown limit at large friction coefficients, but also reduce the distribution of residual tensile stress near the surface.

Thermo-elastic Dynamic Instability of an Elastic Half-Plane Sliding Against a Coated Half-Plane

Thermoelastic Contact Analysis of Functionally Graded Materials with Properties Varying Exponentially

The Coupled Thermoelastic Instability of FGM Coatings with Arbitrarily Varying Properties: In-Plane Sliding

Thermo-elastoplastic sliding frictional contact and wear analysis of FGM-coated half-planes

Novel Semi-Analytical Solutions For The Transient Behaviors Of Functionally Graded Material Plates In The Thermal Environment

Elastic shakedown analysis of two-dimensional thermo-elastic rolling/sliding contact for a functionally graded coating/substrate structure with arbitrarily varying thermo-elastic properties

Thermoelastic instability of functionally graded materials with interaction of frictional heat and contact resistance

Thermo-mechanically coupled sliding contact shakedown analysis of functionally graded coating-substrate structures

The dynamic response of the FGM coated half-plane with hysteretic damping under time harmonic loading

Two-dimensional sliding frictional contact of functionally graded materials

Stability of viscoelastic film on a slippery inclined plane

Symplectic elasticity for bi-directional functionally graded materials

Axisymmetric thermoelastic contact of an FGM-coated half-space under a rotating punch

Modeling of fully coupled thermo-elastic sliding contact of coated systems

Influence of FGM coating on the dynamic fracture behavior of multiple cracks in a homogeneous half-plane under in-plane loading

Elastohydrodynamic Lubrication Line Contact of a Functionally Graded Material Coated Half-Plane

Sliding frictional and adhesive coupling contact analysis of FGPM layered half-space under an insulating indenter

Partial Slip Contact Analysis on Three-Dimensional Elastic Layered Half Space

Effect of a thin surface coating layer on thermal stresses within an elastic half-plane

Two-dimensional contact mechanics of functionally graded materials with arbitrary spatial variations of material properties

Interfacial Slippage Effect on the Surface Instability of A Thin Elastic Film under Van Der Waals Force