Abstract:The presence of harmful substances such as dyes in water systems poses a direct threat to the quality of people's lives and other organisms living in the ecosystem. Orange G (OG) is considered a hazardous dye. The existing paper attempts to evaluate a low-cost adsorbent for the effective removal of OG dye. The developed adsorbent Polyaniline@Hydroxyapatite extracted from Cilus Gilberti fish Scale (PANI@FHAP) was elaborated through the application of the in situ chemical polymerization method to incorporate PANI on the surface of naturally extracted hydroxyapatite FHAP. The good synthesis of PANI@FHAP was evaluated through multiple techniques including X-ray diffraction (XRD), Scanning electron microscopy coupled with energy dispersive X-ray spectrometry (SEM/EDS), Fourier Transforms Infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA) coupled with thermal differential analysis (DTA) analysis. The results reveal a highly ordered disposition of PANI chains on FHAP, resulting in a well-coated FHAP in the PANI matrix. Furthermore, the presence of functional groups on the surface of PANI such as amine (-NH2) and imine (=NH) groups would facilitate the removal of OG dye from contaminated water. The adsorption of OG onto PANI@FHAP was conducted in batch mode and optimized through response surface methodology coupled with box-Behnken design (RSM/BBD) to investigate the effect of time, adsorbent dose, and initial concentration. The outcomes proved that OG adsorption follows a quadratic model (R2 = 0.989). The kinetic study revealed that the adsorption of OG fits the pseudo-second-order model. On the other hand, the isotherm study declared that the Freundlich model is best suited to the description of OG adsorption. For thermodynamic study, the adsorption of OG is spontaneous in nature and exothermic. Furthermore, the regeneration-reusability study indicates that PANI@FHAP could be regenerated and reused up to five successive cycles. Based on the FTIR spectrum of PANI@FHAP after OG adsorption, the mechanism governing OG adsorption is predominantly driven by π-π interaction, electrostatic interaction, and hydrogen bonding interactions. The obtained results suppose that PANI@FHAP adsorbent can be a competitive material in large-scale applications.

Preparation of a Novel Acid Doped Polyaniline Adsorbent for Removal of Anionic Pollutant from Wastewater

Preparation of Polyaniline Doped with Acid and Polymer Using Electrochemical Deposition

Enhanced adsorption of cationic and anionic dyes from aqueous solutions by polyacid doped polyaniline

Adsorption of anionic acid red G dye on polyaniline nanofibers synthesized by FeCl 3 oxidant: Unravelling the role of synthetic conditions

Polyaniline doping induced abundant active sites in orange peel as an efficient adsorbent material for water treatment

Polyelectrolyte electrostatically self-assembled modified porous polyacrylonitrile nanofibers as adsorbents for anionic dye removal

Adsorption Removal of Tannic Acid from Aqueous Solution by Polyaniline: Analysis of Operating Parameters and Mechanism.

Various acids functionalized polyaniline–peanut shell activated carbon composites for dye removal

Protonated polyaniline and its derivatives as potential adsorbents for simultaneous reclamation of textile dyes and oil/water separation

Adsorption and Reduction of Cr(VI) Together with Cr(III) Sequestration by Polyaniline Confined in Pores of Polystyrene Beads.

Use of a novel low-cost adsorbent PANI@Clay composite to effectively remove OG dye from wastewater: Insights from isotherm kinetic and thermodynamic modeling, investigation using density functional theory DFT/MC/MD

Eco-friendly engineering of micro composite-based hydroxyapatite bio crystal and polyaniline for high removal of OG dye from wastewater: Adsorption mechanism and RSM@BBD optimization

Comprehensive Evaluation of Polyaniline-Doped Lignosulfonate in Adsorbing Dye and Heavy Metal Ions

Fabrication polyaniline via electrochemical synthesis for highly efficient removal of Cr(VI)

Stable organicinorganic hybrid of polyaniline/α-zirconium phosphate for efficient removal of organic pollutants in water environment

Anionic Dye Removal with a Thin Cationic Polyaniline Coating on Cellulosic Biomaterial

Effective removal of Cr(VI) from solution by three-dimensional polyaniline loaded composite porous hydrogel

Remediation of organic pollutant from the aqueous environment using in-house fabricated polyaniline-based hybrid composite (PANI-MnPBA/NiCoMnS) materials

Preparation of polyaniline-coated polyacrylonitrile fiber mats and their application to Cr(VI) removal

Polyaniline/reduced graphene oxide doping induced abundant active sites in enset fiber as an efficient adsorbent material for wastewater treatment

Synthesis, characterization and environmental application of an original adsorbent: polyaniline-coated luffa cylindrica