Abstract:Scheme representing the synthesis of POT‐PVP/MgF/CS‐OXSWCNTs NCs as removal of acid red dye from aqueous solutions. In this study, a new hybrid material was created that exhibits excellent adsorption performance and high stability. POT‐PVP/MgF/CS‐OXSWCNTs NCs were synthesized using a three‐step approach. The process involved the chemical polymerization of poly(o‐toluidine)‐polyvinylpyrrolidone (POT‐PVP) with MgFe2O4 nanoparticles (MgF NPs) and chitosan‐oxidized single‐wall carbon nanotubes (CS‐OXSWCNTs). The synthesis process involved the use of an egg white method to synthesize MgF NPs and cross‐linking chitosan with OXSWCNTs using glutaraldehyde (GA) to obtain CS‐OXSWCNTs. The POT‐PVP copolymer was then used to coat MgF NPs and CS‐OXSWCNTs NCs. The successful synthesis of the NCs with strong component interaction was confirmed by several characterization techniques, including X‐ray diffraction spectroscopy (XRD), Fourier‐transform infrared spectroscopy (FTIR), and Raman spectroscopy. Microscopy analysis using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) verified that the POT‐PVP copolymer had properly coated the MgF NPs and CS‐OXSWCNTs NCs. The N2 adsorption–desorption isotherm verified that the specific surface area of NCs had increased with the addition of MgF NPs and CS‐OXSWCNTs NCs. Furthermore, the composite structure greatly improved the thermal stability of POT‐PVP/MgF/CS‐OXSWCNTs NCs. To evaluate how well the nanocomposites (NCs) eliminated pollutants, an artificially produced toxic effluent that contained acid red dye (A.R) was applied. To investigate their impact on dye removal, several parameters were changed, including pH, adsorbent dosage, time, temperature, and ionic strength. The POT‐PVP/MgF/CS‐OXSWCNTs NCs showed a higher removal rate based on a greater surface area, stability, and conducting power than MgF NPs and POT‐PVP. It was found that 25 mg L−1 and 7.5 mg were the optimal dye concentration and adsorbent dosage, respectively. The POT‐PVP/MgF/CS‐OXSWCNTs NCs achieved 99.46% removal efficiency at an acidic pH of 2. The NCs were found to have a maximum dye adsorption capacity of 107.4 mg g−1, and the adsorption process followed the pseudo‐second‐order kinetics. Thermodynamic analyses revealed that the dye adsorption onto POT‐PVP/MgF/CS‐OXSWCNTs NCs was endothermic, implying a spontaneous and physical adsorption mechanism. It can be inferred from these results that POT‐PVP/MgF/CS‐OXSWCNTs NCs are useful for eliminating dye pollutants from water.

Various acids functionalized polyaniline–peanut shell activated carbon composites for dye removal

Preparation of Polyaniline Doped with Acid and Polymer Using Electrochemical Deposition

Enhanced adsorption of cationic and anionic dyes from aqueous solutions by polyacid doped polyaniline

Polyelectrolyte electrostatically self-assembled modified porous polyacrylonitrile nanofibers as adsorbents for anionic dye removal

Nitrogen-Rich Polyaniline-Based Activated Carbon for Water Treatment: Adsorption Kinetics of Anionic Dye Methyl Orange

Capacitive Organic Dye Removal by Block Copolymer Based Porous Carbon Fibers

Comprehensive Evaluation of Polyaniline-Doped Lignosulfonate in Adsorbing Dye and Heavy Metal Ions

Surface modification of electrospun PAN nanofibers by amine compounds for adsorption of anionic dyes

Adsorption of anionic acid red G dye on polyaniline nanofibers synthesized by FeCl 3 oxidant: Unravelling the role of synthetic conditions

Preparation, Characterization and Application of a Novel Silane-Bridged Polyaniline/cotton Fiber Composite

Revealing the interface chemistry of polyaniline grafted biomass via statistical modeling of multi-component dye systems: optimization, kinetics, thermodynamics, and adsorption mechanism

Anionic Dye Removal with a Thin Cationic Polyaniline Coating on Cellulosic Biomaterial

A nanocomposite based on polyaniline, nickel and manganese oxides for dye removal from aqueous solutions

Remediation of organic pollutant from the aqueous environment using in-house fabricated polyaniline-based hybrid composite (PANI-MnPBA/NiCoMnS) materials

Optimizing Eriochrome Black T adsorption through In-Situ polymerization of Poly(aniline-co-formaldehyde) on biochar: Multivariate approach using full factorial Design, Box-Behnken, Artificial intelligence, and DFT

Acid‐doped polyaniline and its vertically aligned SWCNT composites: Influence of acid type and concentration on structural and electrochemical properties

Amidoxime modification of polyacrylonitrile/Pterocladia capillacea-derived activated carbon composite for adsorption of toxic chromium from aquatic environment

Preparation of polyaniline-coated polyacrylonitrile fiber mats and their application to Cr(VI) removal

Biomass-based nitrogen-doped carbon/polyaniline composite as electrode material for supercapacitor devices

Polyaniline doping induced abundant active sites in orange peel as an efficient adsorbent material for water treatment

Poly(O‐Toluidine)‐polyvinylpyrrolidone copolymer submerged MgFe2O4/CS‐OXSWCNTs nanocomposite for removal of acid red dye from aqueous solutions