Preparation of High-Quality Porous Calcium Hexa-Aluminate Ceramics Using Salt As Both Reaction Medium and Pore-Former

Xueyin Liu,Yan-gai Liu,Zhaohui Huang,Minghao Fang

DOI: https://doi.org/10.1007/s42411-018-0045-9

2018-01-01

Abstract:Porous calcium hexa-aluminate (CA 6 ) ceramics were synthesized by a molten salt-mediated technique using CaCO 3 and α-Al 2 O 3 powders as the main raw materials. The effects of salt type and content, along with firing temperature on phase formation, microstructural evolution, pore generation and size distribution, and mechanical strength of fired samples were investigated and compared. Among the three tested salts (KCl, NaCl, and CaCl 2 ), KCl showed the best whereas CaCl 2 showed the worst accelerating effect on CA 6 formation. In the case of the former, phase-pure CA 6 was formed after 3 h at 1500 °C, whereas in the case of the latter, CA 2 was formed instead as a main phase. The salt not only acted as a reaction medium, accelerating CA 6 formation, but also acted as a pore former, creating high levels of porosity in the fired samples. The apparent porosity of the fired samples clearly increased with an increase in KCl content. But the majority of pores were still micron sized and the pore size distribution was relatively narrow. This, along with the possible toughening effect from the well-developed plate-like CA 6 , conferred relatively high mechanical strength on the final highly porous CA 6 ceramics.