Abstract:Increasing cases of accidents caused by the corrosion of new energy power equipment have appeared in coastal areas. The corrosion of coastal power equipment is not only influenced by temperature, humidity, and corrosive ions, but also by strong electric fields. To further understand the effect of electric fields on the atmospheric corrosion of metals in the context of new energy, the effect of an intermittent direct current electric field and a continuous direct current electric field on the corrosion of carbon steel was investigated using weight loss curves, polarisation curves, X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), and Energy Dispersive Spectroscopy (EDS) techniques. The main corrosion products include Fe3O4, γ-FeOOH, and α-FeOOH in the Cl− solution. The results demonstrate that the continuous electric field (CEF) promotes the growth of γ-FeOOH and inhibits the transformation from γ-FeOOH to α-FeOOH, leading to the formation of a loose corrosion layer. This layer is conducive to the diffusion of dissolved oxygen and accelerates steel corrosion. Due to the short action time of the electric field in the intermittent electric field (IEF), γ-FeOOH cannot crystallise continuously and gradually transforms to α-FeOOH, which leads to poor penetration of the rust layer. Additionally, the time with no electric field is short; therefore, the precipitation and adsorption of chloride ions cannot be realised, and the IEF slows the corrosion rate.

Influence of Direct Current Electric Field on Corrosion Behavior of Tin under a Thin Electrolyte Layer

Effect of the Direct Current Electric Field on the Initial Corrosion of Steel in Simulated Industrial Atmospheric Environment

Effect of Intermittent and Continuous Direct Current Electric Fields on the Initial Corrosion of Steel in Simulated Marine Environment

Influence of Direct Current Electric Field on the Formation, Composition and Microstructure of Corrosion Products Formed on the Steel in Simulated Marine Atmospheric Environment

Effect of Direct Current Electric Field Intensity and Electrolyte Layer Thickness on Oxygen Reduction in Simulated Atmospheric Environment

Probing the Corrosion Mechanism of Zinc under Direct Current Electric Field

The Corrosion Behavior of Steel Exposed to a DC Electric Field in the Simulated Wet-Dry Cyclic Environment

An Investigation on Corrosion Behavior and Mechanism of CoCrFeNi HEA in NaCl Solution under Direct Current Interference

An Electrochemical Study on the Corrosion Behavior of the Tin Plate with Metal Drink Cans

Effect of High-Density Electric Current on the Microstructure and Fatigue Crack Initiation of Stainless Steel

Strain-Induced Corrosion Kinetics at Nanoscale Revealed in Liquid: Enabling Control of Corrosion Dynamics of Electrocatalysis

Texture and Corrosion Resistance of Electrodeposited Tin Coatings

Electrochemical mechanism of tin membrane electrodeposition in ultrasonic field

ELECTROCHEMICAL BEHAVIOR OF TYPE 304STAINLESS STEEL UNDER ALTERNATING ELECTRIC FIELD

Electrochemical Analysis of the Pitting Potential of Tin-plated Copper in Artificial Fresh Water Containing Chloride, Sulfate, and Bicarbonate Ions

Effect of Electric Fields on the Initial Corrosion Behaviour of Carbon Steel at Different Chloride Salt Concentrations

Corrosion Behavior of Pure Zinc and Its Alloy under Thin Electrolyte Layer

Study of tin electroplating process using electrochemical impedance and noise techniques

Study of Tin Electrodeposition with Anion Exchange Membrane in Chloride Solution by a Computational Method

Electrochemical impedance spectroscopy of metals covered with a thin electrolyte layer

Effects of Reflowing Temperature and Time on Alloy Layer of Tinplate and Its Electrochemical Behavior in 3.5% Nacl Solution