Abstract:Textures and residual stresses are generated during electrodeposition of chromium coatings, which directly affect the performance of the coating. In this work, the variations of texture, hydrogen content, residual stress, microhardness and corrosion resistance of chromium deposited from hexavalent [Cr(VI)] chromium bath using direct current deposited technique were investigated. Electrodeposition experiments were carried out on the low carbon steel substrate by varying the key variable current density. The macrotexture of the coatings was studied by XRD. The crystal orientation and dislocation density were analyzed by EBSD. Residual stress was measured by the indentation method. The research demonstrated that a single preferred orientation on the (222) plane was found at current densities of 20 A/dm 2 , 35 A/dm 2 and 50 A/dm 2 . At 40 A/dm 2 , a mixed preferred orientation on the (222) + (211) planes was discovered. Furthermore, the formation of the chromium coating texture was affected by the variation of hydrogen content, for higher hydrogen promoting grain growth along the (222) crystal plane. Notably, the microstructure-property relationship was developed. At the single preferred orientation of (222) plane, the corrosion resistance was more favorable. At the mixed preferred orientation of (222) + (211) planes, the coating surface achieved higher microhardness, but formed higher residual stress and more microcracks. Moreover, the better electroplating parameter was proposed. At 35 A/dm 2 , the coating had the fewer microcracks and the better overall performance. The higher microhardness of 753 HV was found. The more favorable corrosion resistance was discovered, with the breakdown potential and passive current density of 804.7 mV and 2.220 × 10 −6 A/dm 2 . The lower residual stress of 61 MPa was found, which was about 81 % lower than the maximum stress. It was significant in industry for the enhancement of the service life of substrate and the optimization of the chromium coating process.

Texture and Corrosion Resistance of Electrodeposited Tin Coatings

Effect of current density on the texture, residual stress, microhardness and corrosion resistance of electrodeposited chromium coating

Effect of Deposit Microstructure on the Reflow Discoloration of Electroplating Pure Tin

Electrochemical Nucleation and Growth of Sn Onto Double Reduction Steel Substrate from a Stannous Fluoborate Acid Bath

Electrochemistry of Tin Deposition from Methanesulfonic Acid

Effect of tin dioxide sol on the peculiarities of electrodeposition and structure of copper and nickel coatings

Effect of Tin Ion Additive on Zinc Electrode in Alkaline Solution

Influence of Direct Current Electric Field on Corrosion Behavior of Tin under a Thin Electrolyte Layer

Effect of Tin on the Corrosion Resistance of 16 Cr Ferritic Stainless Steel in Acidic Solution and Chloride-Containing Media

Relationship between Texture, Hydrogen Content, Residual Stress and Corrosion Resistance of Electrodeposited Chromium Coating: Influence of Heat Treatment

Electrochemical Control of Whisker Growth on Electrodeposited Tin Coatings

Benzaldehyde derivatives on tin electroplating as corrosion resistance for fabricating copper circuit

Electrochemical mechanism of tin membrane electrodeposition in ultrasonic field

Study on Immersion Tin Process by Electrochemical Methods and Molecular Orbital Theory

Influence of 1,8-Naphthalimide Derivatives As Additives on the Electrodeposition of Tin from Methanesulfonic Acid System

Electrochemical Mechanism of Tin Membrane Electrodeposition under Ultrasonic Waves

Pull-off Testing and Electrical Conductivity of Sn-Based Metal Powder Mixtures Cold Sprayed on Carbon Fiber-Reinforced Polymers

Atmospheric Corrosion Behavior of Tin under an Alternating Current Electric Field

Effect of Electrodeposition Parameters on the Evolution of Crystallographic Texture and Internal Stress of Ni/ZrC Composite Coatings

Characterization of Al-induced electroless tin films on mild steel substrate for corrosion protection

Electrochemical behavior and electro-crystallization mechanism of Cu-Ni/Nano-Al 2 O 3 coating with a deposition current density dependence