Abstract:Crystallinity (Xc) is a crucial crystallographic factor that related closely to mechanical properties in linear polyethylene or high density polyethylene (HDPE), whose molecular weight (MW) is at a 105 level. However, as a typically intractable-processing polymer, the structure-property relationship concerned Xc is still ambiguous for ultrahigh molecular weight polyethylene (UHMWPE) with MW﹥1.5×106. The reason is that high entanglement density hinders chain mobility in the course of UHMWPE crystallization, thus crystalline degree in UHMWPE molding parts is difficult to be artificially modulated within a wide scope. In this study, low chain-entanglement status of UHMWPE melt was achieved by (1) utilizing lowly entangled nascent UHMWPE synthesized via the single-site Ziegler-Natta catalyst, and (2) decreasing the sintered temperature. It is impressive that partial disentanglement reserved in the melt is favorable for obtaining higher crystallinity. Meanwhile, an isothermal crystallization treatment was additionally adopted to further improve the capacity of regulating crystallization after the traditional two-step sintering procedure. By a combination of varying the initial entanglement in nascent powders, sintering temperature, isothermal crystallization duration, and molecular weight of UHMWPE, the Xc of the compression-sintered products has been successfully adjusted in the relatively broad range of 29%≦ Xc≦65%, which offered an opportunity to validly survey the correlation between mechanical property and crystallinity. Particular attention was paid to the yield strength. A linear master straight-line can be plotted as yield strength vs. Xc for all of the samples inspected, indicating crystallinity also plays a dominant role on mechanical performances of UHMWPE sintering parts, as same in the case of HDPE. However, the mechanical reinforcement induced by increment of Xc in UHMWPE is more efficient than in HDPE. The yield strength of UHMWPE is much higher than that of HDPE at the same Xc, indicating the amorphous phase or entanglements in UHMWPE is crucial to determine the mechanical property. These findings are of significance for guiding the manufacturing of high-performance UHMWPE materials via crystallization manipulation.

Heterogeneous distribution of chain mobility in nascent UHMWPE in the less entangled state

Heterogeneous Distribution of Entanglements in a Nonequilibrium Polymer Melt of UHMWPE: Influence on Crystallization Without and with Graphene Oxide

Chain Dynamics of Partially Disentangled UHMWPE around Melting Point Characterized by 1H Low-Field Solid-State NMR

The Phase Behavior Of Polyethylene Ring Chains

Phase Structures of Nascent Polyethylene Powder Studied by Wideline Proton Nmr

Phase Behavior of a Single Polyethylene Chain Confined Between Two Adsorption Walls Part B Polymer Physics

The Chain Dis-Entanglement Effect of Polyhedral Oligomeric Silsesquioxanes (POSS) on Ultra-High Molecular Weight Polyethylene (UHMWPE)

Contribution of the Initially Entangled State and Particle Size to the Sintering Kinetics of UHMWPE

Unexpected Role of Short Chains in Entangled Polymer Networks

The Isothermal Melting Kinetics of Ultrahigh Molecular Weight Polyethylene Crystals

Nanometer Scale Mechanical Study on Well Defined Nanostructured Chain Aggregation of Polyethylene

Effect of Entangled State of Nascent UHMWPE on Structural and Mechanical Properties of HDPE/UHMWPE Blends

Chain Length Dispersity Effects on Mobility of Entangled Polymers

Chain conformation and dynamics in ultrahigh molecular weight polyethylene melts undergoing extensional–shear coupled flow: insight from dissipative particle dynamics simulation

Phase Structure and Mechanical Properties of Disentangled Ultra-High Molecular Weight Polyethylene/polyhedral Oligomeric Silsesquioxane Nanocomposites in a Solid State

Chain disentanglement in POSS/UHMWPE composites prepared via in-situ polymerization

Polymer chain conformations in hybrid composites of UHMWPE incorporated by GNP/MWCNT

Study on the Effects of Soluble POSS on Chain Disentanglement in UHMWPE Polymerization

THE RELATIONSHIP BETWEEN THE CHAIN ENTANGLEMENT AND VISCOSITY IN UHMWPE SOLUTIONS

Pursuit of the correlation between yield strength and crystallinity in sintering-molded UHMWPE

Studies On The Nature Of The Macromolecular Condensed State Of "Nascent" Ultra High Molar Mass Polyethylene