Abstract:High-performance ultrahigh-molecular-weight polyethylene (UHMWPE)/low-molecular-weight polyethylene (PE) mixture additives were proven to be effective for enhancing commercial high-density polyethylene (HDPE) resins, which were synthesized by the complicated dual-site immobilized catalyst system. In this paper, PE wax components were preadded in the polymerization reactor for in situ synthesizing the UHMWPE/PE wax binary blends with just a single SiO2/MgCl2 supported Z-N catalyst modified by the active site isolators. The influence of PE wax addition on the catalytic activity, molecular weight, thermodynamic property, particle size, and entanglement density was systematically researched. It was evidenced that the catalytic activity and molecular weight exhibit a linear relationship with the ethylene solubility caused by the PE wax addition. Besides, the competition between chain propagation/crystallization balance and PE wax long chains entanglement effect arising from the PE wax addition leads to the minimum entanglement density (G(N)(t) = 0.59) of UHPE-20%. The disbalance of chain propagation rate and chain crystallization rate can be broken by PE particle fragmentation, inducing rapidly increased entanglements. Furthermore, with the synergistic disentanglement influence of reduced entanglements for UHMWPE and the chain diffusion ability for PE wax, the LU-30 sample with a mixture of UHPE-30% and linear low-density polyethylene (LLDPE) exhibits the optimum strength/stiffness/toughness properties. The tensile strength, Young's modulus, and impact strength of LU-30 reach 18.2 MPa (+4%), 172.1 MPa (+53.8%), 60.5 kJ/m(2) (+13.1%), respectively, compared with those of pure LLDPE. The overall enhanced mechanical properties are attributed to the intensive signal intensity and tightly stacked form of shish-kebab structures, which were verified by the two-dimensional small angle X-ray scattering and two-dimensional wide angle X-ray diffraction patterns. In addition, the in situ polymerization method of UHMWPE/PE wax with SiO2/MgCl2 supported Z-N catalysts exhibits a great probability of efficient utilization of low-molecular-weight polyethylene by-products (PE wax).

Chain disentanglement in POSS/UHMWPE composites prepared via in-situ polymerization

Study on the Effects of Soluble POSS on Chain Disentanglement in UHMWPE Polymerization

Disentangled UHMWPE/POSS nanocomposites prepared by ethylene in situ polymerization

Studies of polyhedral oligomeric silsesquioxane and polyhedral oligomeric silsesquioxane- polymer

The Preparation and Characterization of PMMA/POSS-OH Hybrid Fiber

Phase Structure and Mechanical Properties of Disentangled Ultra-High Molecular Weight Polyethylene/polyhedral Oligomeric Silsesquioxane Nanocomposites in a Solid State

Influence Of Polyhedral Oligomeric Silsesquioxane Structure On The Disentangled State Of Ultrahigh Molecular Weight Polyethylene Nanocomposites During Ethylene In Situ Polymerization

Crystallization Behavior of Ultrahigh‐molecular‐weight Polyethylene/polyhedral Oligomeric Silsesquioxane Nanocomposites Prepared by Ethylene in Situ Polymerization

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

Heterogeneous Distribution of Entanglements in a Nonequilibrium Polymer Melt of UHMWPE: Influence on Crystallization Without and with Graphene Oxide

Influence of the Fragmentation of POSS-Modified Heterogeneous Catalyst on the Formation of Chain Entanglements

Entanglement Formation Mechanism in the POSS Modified Heterogeneous Ziegler–Natta Catalysts

Chain Dynamics of Partially Disentangled UHMWPE around Melting Point Characterized by 1H Low-Field Solid-State NMR

Suppressing the Entanglements of Ultrahigh-Molecular-Weight Polyethylene Via Controlling the Adhesion Effect in a POSS-Modified Support

Contribution of the Initially Entangled State and Particle Size to the Sintering Kinetics of UHMWPE

Metallocene Polyolefins Reinforced by Low-Entanglement UHMWPE Through Interfacial Entanglements

Efficient Synthesis Of Low-Polydispersity Uhmwpe By Elevating Active Sites On Anchored Poss Molecules

Structure–property relationships and nanofiller‐induced hydro‐anti‐plasticization in polyhydroxyurethane/POSS hybrid composites

The in Situ Synthesis of Weakly Entangled Ultrahigh‐molecular‐weight Polyethylene/polyethylene Wax Blends and Its Synergetic Disentanglement Effect on LLDPE Reinforcement

Synthesis of N-phenylaminomethyl POSS and its utilization in polyurethane

Rheological study of the gelation of cross-linking polyhedral oligomeric silsesquioxanes (POSS)/PU composites