Abstract:Surface texture and titanium nitride (TiN) coating have been established as effective methods for enhancing the tribological property of mechanical friction pairs. This study aims to investigate the tribological performance of dimple-textured surfaces with TiN coating under oil-lubricated conditions using a pin-on-disc wear experiment. Four types of pin samples with various end surfaces were designed, including bare rod samples, TiN-coated samples, textured samples, and TiN-coated/textured samples. The surface texture consists of a series of cylindrical micro-dimples with a diameter of 150 μm and a depth of 40 μm fabricated on the end surface of the pin. TiN coating treatment on the textured surface of the end face was performed by vacuum sputtering coating equipment. The study focuses on measuring and comparatively analyzing the friction coefficient, wear morphology, and binding force of the pin-disc friction pairs among the experiments. Compared with bare rod samples, TiN-coated/textured samples will reduce the friction coefficient (COF) of the pin-on-disc friction pair by at least 20% under oil-lubricated conditions in a 50 N normal contact load. The results indicate that the synergistic effect of dimple surface texture and TiN coating optimizes friction performance and reduces wear, highlighting the novelty of this study. Furthermore, the study identifies the hydrodynamic lubrication effect of the surface morphology formed by the dimple surface texture as a key factor in improving lubrication performance and reducing friction. Additionally, the dimple surface texture enables the mitigation of third body wear due to the wear debris storage function of the micro-dimples. This research provides valuable insights for the design and fabrication of mechanical friction pairs with high wear resistance under oil-lubricated conditions.

Effects of Micro-Milled Malposed Dimple Structures on Tribological Behavior of Al-Si Alloy under Droplet Lubricant Condition

Effect of Micro-Dimple Geometry on the Tribological Characteristics of Textured Surfaces

Improving Tribological Behavior of Laser Textured Ti-20Zr-10Nb-4Ta Alloy with Dimple Surface

Development of surface textures using micro-milling operation for improved tribological characteristics of aluminium alloy

Effects of Micro-Dimple Arrangements on Tribological Performance of Sliding Surfaces

Tribological Properties of Dimple-Textured Titanium Alloys under Dry Sliding Contact

Effects Of Surface Texturing On The Tribological Behavior Of Piston Rings Under Lubricated Conditions

Effects of different surface textures on tribological performances of the cylinder liner-piston ring: An experimental study

Tribological Performance of Multiscale Micro-Textured H62 Brass Surface Fabricated by Micro-Milling and Wet Micro-Blasting

Effects of the array modes of laser-textured micro-dimples on the tribological performance of cylinder liner–piston ring

Influence of different loads and temperatures on solid lubricant-filled micro-dimples existing on both cylinder liner and piston ring

Effect of Micro-Dimple Texture on the Tribological Performance of Brass with Titanium Nitride (TiN) Coating under Oil-Lubricated Conditions

Tribological Properties Of Surface Dimple-Textured By Pellet-Pressing

Effect of Micro-Dimple Shapes on Tribological Properties of Specimen Surfaces

Comparative Study on the tribological performance and wear behaviour of hypereutectic Al–Si cylinder liner surfaces textured using micro-drilling and mechanical indentation-based approaches

Effects of Liner Surface Textures on the Tribological Performance of Different Production Piston Rings

Influence of Microdimple on Lubrication Performance of Textured Plunger Pump

Effect of a Micro-Textured Surface with Deposited MoS2-Ti Film on Long-Term Wear Performance in Vacuum

The Effect of Triangle-Shaped Surface Textures on the Performance of the Lubricated Point-Contacts

Surface Composition–lubrication Design of Al2O3/Ni Laminated Composites—part I: Tribological Synergy Effect of Micro–dimpled Texture and Diamond–like Carbon Films in a Water Environment

The Exposure Height of Silicon Particle with Round Edges Effect on the Tribological Property of Al-Si Alloy Cylinder Liner