Abstract:Understanding the influence mechanism of abrasive/tool wear on machining is the key to realize high-efficiency ultra-precision machining of fused silica. To explore the effect of abrasive/tool wear on ductile machining, the smoothed particle hydrodynamics (SPH) cutting models with different edge radii are established. Through the analysis of equivalent rake angle, hydrostatic pressure, cutting force and maximum principal stress with the Flamant’s formula, the influence of edge radii on ductile-brittle transition (DBT) is discussed for the first time. The simulation results show that when the edge radius increases from less to larger than the cutting depth, the equivalent rake angle changes from positive to negative, and the maximum hydrostatic pressure gradually increases, which is beneficial to promote the ductile processing. Meanwhile, with the rise of edge radius (i.e., abrasive/tool wear), both the cutting force and crack initiation angle increase, while the friction coefficient and normalized maximum principal decrease. When the value of normalized maximum principal stress exceeds 2.702, the crack in the workpiece begins to initiate, and its initiation angle calculated by the Flamant’s formula is in good agreement with the simulation results as well as less than 50°. Finally, the nano-scratch experiment was carried out, and the material removal mechanism and friction coefficient f similar to the simulation were obtained, which further proved the accuracy of SPH model. This study is meaningful for understanding the effect of abrasive/tool wear on the removal mechanism of brittle materials and improving the quality and efficiency of cutting and grinding.

Predictive cutting force model for ductile-regime machining of brittle materials

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

An analytical force and energy model for ductile-brittle transition in ultra-precision grinding of brittle materials

A cutting force prediction model for rotary ultrasonic side grinding of CFRP composites considering coexistence of brittleness and ductility

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Improved Force Prediction Model for Grinding Zerodur Based on the Comprehensive Material Removal Mechanism.

A New Model of Grinding Forces Prediction for Machining Brittle and Hard Materials

A New Model For Predicting The Failure Of Ductile Material

A New Dynamic Boring Force Calculation Method Using the Analytical Model of Time-Varying Toolpath and Chip Fracture

A mechanistic cutting force model based on ductile and brittle fracture material removal modes for edge surface grinding of CFRP composites using rotary ultrasonic machining

Finite Element Modeling of Brittle and Ductile Modes in Cutting of 3C-Sic

A Ductile–brittle Fracture Model for Material Ductile Damage in Plastic Deformation Based on Microvoid Growth

Prediction of Critical Cutting Depth for Ductile-Brittle Transition in Ultrasonic Vibration Assisted Grinding of Optical Glasses

Mathematical Model for Cutting Force in Rotary Ultrasonic Face Milling of Brittle Materials

Development of a cutting force prediction model based on brittle fracture for carbon fiber reinforced polymers for rotary ultrasonic drilling

Mechanical model for predicting thrust force with tool wear effects in drilling of unidirectional CFRP

Ultrasonic-Vibration-Assisted Grinding Of Brittle Materials: A Mechanistic Model For Cutting Force

An Analysis of the Effect of Abrasive/Tool Wear on the Ductile Machining of Fused Silica from the Perspective of Stress

Mathematical model to predict cutting force in rotary ultrasonic assisted end grinding of Si3N4 considering both ductile and brittle deformation

Modeling the Dependency of Edge Chipping Size on the Material Properties and Cutting Force for Rotary Ultrasonic Drilling of Brittle Materials

Cutting Force Modeling and Prediction in End Milling Including Flank Wear